***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Recommended Consumables

Servicing, Oil Changes, Fluids & Much More.

Moderators: Moderators, Senior Moderators

pharmerben
INACTIVE Member Account
Posts: 22
Joined: Wed Feb 24, 2010 2:28 pm
Location: West Melbourne, VIC

Recommended Consumables

Postby pharmerben » Wed Mar 03, 2010 12:25 am

I've been trawling through the posts looking for car consumables that are recommended by members. It was a time consuming job, so I thought I would do a summary so it is easier for new members. Thanks to the members who have posted.
Much thanks to Sir-VRX - Tech Master. I have a definite bias towards his recommendations.

Occasionally group buys are arranged through Ofey - Bargaining master to help members save.

Many how to instructions may be found in posts by LZY_EYE or tadz0rz. Alternatively for those more independent minded, refer to the Official CJ workshop manual.

Please modify or update as you see fit. Making it a sticky topic might be helpful.

-----

Engine Oil:

Brands: Penrite (Aussie), Nulon (Aussie) and Castrol edge (affordable)
Synthetic fuels are superior to blends and straight mineral.

0w-40, 5w-30, 5w-40 - Fuel economy, performance, pricey
10w-30, 10w-40 - V.G protection, affordable
15w-50 - Excellent protection, ambient temp > 40C

*remember to change the sump plug washer each time you change the
oil for peace of mind. It's very cheap too, even O.E.M.


Oil filter: Ryco Z411 (cheapest and good quality), K&N HP 1010 (easy removal, expensive ~ $21) and O.E.M

Spark plug: NGK laser iridium FR6E1-11 or IX

Brake fluid: Motul Dot 4 or PBR Dot 4

Coolant: Genuine (Dia Queen SLLC)
Coolant flush: Genuine

Air filter: O.E.M (fuel efficient), K&N (reuseable, v.slight HP gain and oil coated), Blitz (cheaper & good quality)

Headlights: Narva arctic blue (excellent value, good quality) or Philips (more expensive, some more blue e.g. diamond/blue, more bright e.g. extreme power).
6000k quality HIDs with excellent cutoff. It is however illegal

Brake pads: EBC green stuff
Rotors: DBA slotted

Tyres:
I'm sticking with stock VR wheels (16") so good tyres are:
Toyo proxies 4 (good price and long life)
Michelin energy (excellent fuel economy)
17":
18":

PB
Last edited by pharmerben on Sat Mar 06, 2010 10:32 am, edited 1 time in total.

User avatar
lancervr
Lancer MASTER
Lancer MASTER
Posts: 1923
Joined: Sat Oct 17, 2009 2:26 am
Location: WA,Australia

Postby lancervr » Wed Mar 03, 2010 2:05 am

well also for headlights piaa bulbs are good as well white and very bright and use existing wattage..... but a lil dear in the price range tho.... but i rkn its worth it....

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Wed Mar 03, 2010 8:14 am

My headlights have handled the heat from HID's for almost a year now with no negative side effects that I've noticed.

Except for the brightness for other road users.. but most of the time it isn't too bad.
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

pharmerben
INACTIVE Member Account
Posts: 22
Joined: Wed Feb 24, 2010 2:28 pm
Location: West Melbourne, VIC

Postby pharmerben » Sat Mar 06, 2010 10:34 am

Not that we condone using HIDs but can anyone suggest some good brands <$400? =D

User avatar
bryzabone
Lancer VR/GT
Lancer VR/GT
Posts: 202
Joined: Mon Feb 22, 2010 12:18 am
Location: Alstonville, NSW

Postby bryzabone » Thu Mar 11, 2010 5:14 pm

For tyres i would suggest bridgestone. they are made for aussie roads more so than other brands. I think the GIII's were excellent on my last car-superceded by RE-001's now.
The RE-592's are very good, dual compound rubber, good wear and quiet ride. Not too bad on grip either, even when down to the markers.
For every "Drive Safely" sign, shouldn't there be a "Resume Normal Driving" sign?

User avatar
anghel132
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 314
Joined: Sat Feb 09, 2013 5:18 pm
Location: Brisbane, Australia

Postby anghel132 » Tue May 28, 2013 9:43 pm

Should Sticky though.

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Tue May 28, 2013 9:50 pm

bryzabone wrote:For tyres i would suggest bridgestone. they are made for aussie roads more so than other brands. I think the GIIIs were excellent on my last car-superceded by RE-001s now. The RE-592s are very good, dual compound rubber, good wear and quiet ride. Not too bad on grip either, even when down to the markers.
im running bridgestone potenzas and love them they are brilliant
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5

Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Wed Feb 19, 2014 7:24 pm

Not to bring up an old thread but for the K&N air filter itself, what code should i be looking for for a 2009 Lancer ES?

Will this be fine?

http://www.ebay.com.au/itm/K-N-Air-Filt ... #vi-ilComp

User avatar
BZC-45S
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 388
Joined: Mon Feb 20, 2012 10:23 pm
Location: Sydney, AU

Postby BZC-45S » Wed Feb 19, 2014 9:18 pm

Should be 33-2392, according to K&N's site.

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Thu Feb 20, 2014 7:00 am

Oil: always use a synthetic on a high-revving engine (like ours) - currently have Mobil 1 gold and a Mobil 1 oil filter (imported) for the car's first service - fifty buck more for the oil spread over 15000KM is only a few cents extra a day...

Air filter: hard to go past K&N...
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."

Image

User avatar
Tweak
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 459
Joined: Sun Nov 14, 2010 6:11 am
Location: Australia

Postby Tweak » Thu Feb 20, 2014 7:03 am

hks Oil filter with a magnet on it
Mobil 1
HKS air filter (easy maintance. Remove rinse under water and fit. Tho every so often i sock it in some dishwashing liquid to break down the dirt.

Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Thu Feb 20, 2014 10:01 am

Thanks Chi!


Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 54 guests