***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

PLASTIDIP Front End and Sportsback Rear Lip!!

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Tue Feb 18, 2014 7:02 pm

ashleymorris wrote:Im waiting on some black vinyl so I can DIY my own rear diffuser too (no way Im going to pay upwards of $400 for one!) I was thinking about using some black wheel moulding to line it off too, but I might just do the vinyl first and see how it looks. http://www.supercheapauto.com.au/online ... 4780#Cross
i vinyled mine orginally ash ... its a pain in the ass to get right ... id opt for plasti dip of spray ... i ended up spraying it
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5
User avatar
Sportsback7
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Thu Jan 23, 2014 7:07 pm
Location: South Australia - Australia

Postby Sportsback7 » Tue Feb 18, 2014 7:11 pm

Havent personally used Vinyl wrap but Plastidip does seem like it would be the easier option
User avatar
Sportsback7
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Thu Jan 23, 2014 7:07 pm
Location: South Australia - Australia

Postby Sportsback7 » Tue Feb 18, 2014 7:11 pm

Havent personally used Vinyl wrap but Plastidip does seem like it would be the easier option
User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Tue Feb 18, 2014 8:40 pm

Someone on here has used chrome wheel-arch moulding (the stuff us poor people use to chrome around the grille) in vertical strips along the back before spraying on plasti-dip - makes it look like. 'Proper' diffuser!

And saves literally hundreds of dollRs...
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."

Image
User avatar
Sportsback7
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Thu Jan 23, 2014 7:07 pm
Location: South Australia - Australia

Postby Sportsback7 » Tue Feb 18, 2014 10:56 pm

never heard of that one before but that sounds like a wicked idea!!
User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Wed Feb 19, 2014 7:42 am

That's not the one I was thinkng of - it was short, vertical strips rather than going around the edge (but that works well too!)
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image
User avatar
ashleymorris
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 393
Joined: Thu Sep 12, 2013 10:22 am
Location: Melbourne

Postby ashleymorris » Wed Feb 19, 2014 11:34 am

Sportsback7 wrote:never heard of that one before but that sounds like a wicked idea!!


The Supercheap link I posted before is for the body/wheel arch moulding :P
That's what I planned on using for it. Only reason I decided vinyl instead of plasti dip was because the vinyl cost me like $4 ahaha
But even if I change my mind, it's always handy to have different colours of vinyl laying around! :P

I see you sprayed that little groove bit too?
User avatar
Sportsback7
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Thu Jan 23, 2014 7:07 pm
Location: South Australia - Australia

Postby Sportsback7 » Wed Feb 19, 2014 11:50 am

Do you mean the groove on the little rear lip? Or where abouts?
User avatar
Sportsback7
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Thu Jan 23, 2014 7:07 pm
Location: South Australia - Australia

Postby Sportsback7 » Wed Feb 19, 2014 11:51 am

If your talking about the rear groove I stopped it in the middle where the groove is!
User avatar
ashleymorris
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 393
Joined: Thu Sep 12, 2013 10:22 am
Location: Melbourne

Postby ashleymorris » Wed Feb 19, 2014 2:08 pm

Yeah that weird little groove bit that separates it!
User avatar
Sportsback7
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Thu Jan 23, 2014 7:07 pm
Location: South Australia - Australia

Postby Sportsback7 » Wed Feb 19, 2014 2:17 pm

Yeah I made it so it went to exactly inside the groove all the way around
User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Wed Feb 19, 2014 5:26 pm

This must be the grooviest thread on ClubCJ...

:-D
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image
User avatar
Sportsback7
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Thu Jan 23, 2014 7:07 pm
Location: South Australia - Australia

Postby Sportsback7 » Wed Feb 19, 2014 8:34 pm

hahahaha good one :D
Post Reply

Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 89 guests