***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Tiff's adventure with Plasti Dip!
Moderators: Moderators, Senior Moderators
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
Tiff's adventure with Plasti Dip!
I had a small adventure today with Plasti Dip.. Oh Plasti Dip.. You are simply fantastic... except I screwed it up Was happy with the finished product and then I didn't like it so i pulled it off all xD Decided it's going to be easier to get it vinyl wrapped :S and I didn't like the chrome with it either ;S
But...
Without number plate! Am very hesitant to put it back on
All Taped up haha.. I went overboard but I wanted to be safe then sorry....
First coat:
After a few more coats, it was the finished product after pulling the Newspaper and tape off... and well.... I ended up pulling it all off, I just need to get a knife and scrape the rest off >_< The masking I did was a lil uhh :S Horrible because it started pulling the rest of the plasti dip off with it... and this is how it ended up
and after pulling the plasti dip off, the only thing it really stuck to was the white spot that's on my front bumper :S I guess it looks like she has a beauty spot or something lol.... But in saying that, I think I'm going to just get it vinyl wrapped and the chrome removed :S I didn't like how it turned out xD it looked like my car had a mustache... :S
But...
Without number plate! Am very hesitant to put it back on
All Taped up haha.. I went overboard but I wanted to be safe then sorry....
First coat:
After a few more coats, it was the finished product after pulling the Newspaper and tape off... and well.... I ended up pulling it all off, I just need to get a knife and scrape the rest off >_< The masking I did was a lil uhh :S Horrible because it started pulling the rest of the plasti dip off with it... and this is how it ended up
and after pulling the plasti dip off, the only thing it really stuck to was the white spot that's on my front bumper :S I guess it looks like she has a beauty spot or something lol.... But in saying that, I think I'm going to just get it vinyl wrapped and the chrome removed :S I didn't like how it turned out xD it looked like my car had a mustache... :S
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
Ikr? >_<
Definitely getting it vinyl wrapped... or may give it another go next weekend... but I'm not feeling that spontaneous now xD
Definitely getting it vinyl wrapped... or may give it another go next weekend... but I'm not feeling that spontaneous now xD
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
- Metalstrix
- Post Monster
- Posts: 2739
- Joined: Thu Dec 13, 2012 4:16 pm
- Location: Sydney Australia
Did you let it dry fully?, because that may be your issue, if you peel the masking off straight after you spray the last coat (whilst it is still wet), you will get nice smooth edges and the dip will stay where as if you peel it once dry it will take the rest with it as it has already bonded together thus the whole strip will come off, hope this helps
My EVO (X MR) progress: http://clubcj.net/viewtopic.php?p=328713#328713
4 cylinders, 3 diamonds, 2 litre, 1 turbo, 0 reasons to buy anything else
ROTM WINNER SEPT 2014
4 cylinders, 3 diamonds, 2 litre, 1 turbo, 0 reasons to buy anything else
ROTM WINNER SEPT 2014
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
I took it off after the did the last coat
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
I'm going to leave it and try again next weekend >_< might've been because I used the xpack car wash stuff when I washed the front bumper before doing it >____<
:S
:S
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
I was following the whole shabang on Instagram, thank's Tiff ahaha
It may look better RA style with the chrome above and below blacked out and some chrome 'tape' stuff around it?
http://www.ebay.com.au/itm/10mm-Chrome- ... 856&_uhb=1
it could either look reallllly bad or realllly good aha
just a thought
It may look better RA style with the chrome above and below blacked out and some chrome 'tape' stuff around it?
http://www.ebay.com.au/itm/10mm-Chrome- ... 856&_uhb=1
it could either look reallllly bad or realllly good aha
just a thought
The trick is to remove the tape after each coat while the plasti-dip is still wet and re-apply new tape (in the exact same location) for the next coat. Otherwise you will run into the problem you experienced >.<
Also, wash the surface with wax and grease remover before spraying, some car washes include a wax which will stop the plasti-dip from sticking.
Happy dipping!
Also, wash the surface with wax and grease remover before spraying, some car washes include a wax which will stop the plasti-dip from sticking.
Happy dipping!
2.0L - K&N Typhoon SRI - High-Flow Exhaust System - Merlinised
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
Haha sorry Luke for all the posts on Instagram thought I'd keep people updated haha!
Oooh! Thanks for the tip :3 shall keep it in mind when I try again! Am thinking that the chrome needs to go :3 although I do like it with how it is normally >_< but gah! XD
Oooh! Thanks for the tip :3 shall keep it in mind when I try again! Am thinking that the chrome needs to go :3 although I do like it with how it is normally >_< but gah! XD
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
What i found with plastic dip is that you dont want it to dry up fully between each spray i only waited like 2-3min between each spray.
it worked for me...
pepople told me to do the tape after each spray as well, im sure it should go well, but im just dont have the patience for that.. ;P
maybe give it a shot.
it worked for me...
pepople told me to do the tape after each spray as well, im sure it should go well, but im just dont have the patience for that.. ;P
maybe give it a shot.
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
I left it 10-15 between each coat
Will keep that in mind next time though >_<
Am definitely thankful for all the tips guys! Especially the ClubCJ Vic guys on Facebook
Especially Damir who's been following me on Instagram and giving out advice as well I really appreciate it everyone!!
I'm definitely going to be removing the chrome and spraying that as well I'm going to have to do a search on here how to remove the front bumper though haha Although for a first timer, I am proud of how it turned out It could've been alot worse haha, I was honestly scared of doing it Because I've never ever done anything like this before xD but, anyway
Will keep that in mind next time though >_<
Am definitely thankful for all the tips guys! Especially the ClubCJ Vic guys on Facebook
Especially Damir who's been following me on Instagram and giving out advice as well I really appreciate it everyone!!
I'm definitely going to be removing the chrome and spraying that as well I'm going to have to do a search on here how to remove the front bumper though haha Although for a first timer, I am proud of how it turned out It could've been alot worse haha, I was honestly scared of doing it Because I've never ever done anything like this before xD but, anyway
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Who is online
Users browsing this forum: No registered users and 50 guests