I really think we need a contact at this office or something
Can anybody help me find where in the ADR it states what level of tint on the tail light/how much light can be blocked out is acceptable before it becomes illegal?
I can't find anything in any of the TMR files.
Don't tell me "it's illegal", "don't bother" because that's not what I'm asking. I want to know if there is ANYWHERE that it's stated, how much can be blocked out. Like some window tints are 20% or however it works in states outside of QLD
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
ADR on tail lights
Moderators: Moderators, Senior Moderators
- ashleymorris
- Lancer VRX/GTS
- Posts: 393
- Joined: Thu Sep 12, 2013 10:22 am
- Location: Melbourne
- jordan.fuchs
- Lancer Ralliart
- Posts: 705
- Joined: Mon Feb 11, 2013 1:00 pm
- ashleymorris
- Lancer VRX/GTS
- Posts: 393
- Joined: Thu Sep 12, 2013 10:22 am
- Location: Melbourne
- jordan.fuchs
- Lancer Ralliart
- Posts: 705
- Joined: Mon Feb 11, 2013 1:00 pm
- ashleymorris
- Lancer VRX/GTS
- Posts: 393
- Joined: Thu Sep 12, 2013 10:22 am
- Location: Melbourne
The only thing I know that you really should have when you do these is that you can still see the light nice, bright and clear at different angles.
If you do the tint/nite shade and all the above is ticked then you really should be fine.
So, basically it depends on how bright it is, such and such (what Jordan said).
Except.. cops just do what they feel like tbh, like they do towards freaking everything anyway.. ==
Edit: added a few things.
If you do the tint/nite shade and all the above is ticked then you really should be fine.
So, basically it depends on how bright it is, such and such (what Jordan said).
Except.. cops just do what they feel like tbh, like they do towards freaking everything anyway.. ==
Edit: added a few things.
Last edited by Seffy on Thu Nov 28, 2013 4:41 pm, edited 1 time in total.
Crayon Pop "straight-five engine" dance ftw.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I dislike cops as much as the next guy. Alot of them sound off without getting their facts right. And that pisses me off.
However, there's one point we need to address here:
I'll give you a start.
Start looking through here.
If you can't be asked to read
I'll help you further nail down the sections you want to read:
Vehicle Standard (Australian Design Rule 49/00 - Front and Rear Position (Side) Lamps, Stop Lamps and End Outline Marker Lamps) 2006
It doesn't have a definition of how much it can be blocked out. It's about how much light in candelas is emitted by the lamps. Another way of looking at it, Not how much you can block. Sure you can block, but after blocking how much do you actually emit and if that still reaches the acceptable minimum.
So please get your facts right before you sound off.
However, there's one point we need to address here:
Can anybody help me find where in the ADR it states what level of tint on the tail light/how much light can be blocked out is acceptable before it becomes illegal?
I can't find anything in any of the TMR files.
I'll give you a start.
Start looking through here.
If you can't be asked to read
I'll help you further nail down the sections you want to read:
Vehicle Standard (Australian Design Rule 49/00 - Front and Rear Position (Side) Lamps, Stop Lamps and End Outline Marker Lamps) 2006
It doesn't have a definition of how much it can be blocked out. It's about how much light in candelas is emitted by the lamps. Another way of looking at it, Not how much you can block. Sure you can block, but after blocking how much do you actually emit and if that still reaches the acceptable minimum.
So please get your facts right before you sound off.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ashleymorris
- Lancer VRX/GTS
- Posts: 393
- Joined: Thu Sep 12, 2013 10:22 am
- Location: Melbourne
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
It would help if you read it and got your facts right before you sound off as well. If not you're no different from those Pigs.
And if you don't bother reading it (i.e. Not bored enough), I would think its pretty clear your post is baseless and a joke.
And if you don't bother reading it (i.e. Not bored enough), I would think its pretty clear your post is baseless and a joke.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ashleymorris
- Lancer VRX/GTS
- Posts: 393
- Joined: Thu Sep 12, 2013 10:22 am
- Location: Melbourne
Sorry, I was under the impression that this was a place where I could ask my questions and receive help from people who might happen to know and help me understand.
Not be told that my questions are jokes.
It's rare, but sometimes I do have things to do while I'm at work, hence the "if I get bored" comment, ie not having any work to do and having spare time to read them.
Not be told that my questions are jokes.
It's rare, but sometimes I do have things to do while I'm at work, hence the "if I get bored" comment, ie not having any work to do and having spare time to read them.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
But you're the one keen to find out what can be done.
I've also helped by directing you to where you need to begin reading.
I've helped greatly IMHO.
It's now up to you to read it and ensure that your rant at the start is justified.
I've also helped by directing you to where you need to begin reading.
I've helped greatly IMHO.
It's now up to you to read it and ensure that your rant at the start is justified.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ashleymorris
- Lancer VRX/GTS
- Posts: 393
- Joined: Thu Sep 12, 2013 10:22 am
- Location: Melbourne
- jordan.fuchs
- Lancer Ralliart
- Posts: 705
- Joined: Mon Feb 11, 2013 1:00 pm
ofey wrote:It would help if you read it and got your facts right before you sound off as well. If not youre no different from those Pigs. And if you dont bother reading it (i.e. Not bored enough), I would think its pretty clear your post is baseless and a joke.
I hardly think that's neccesary, she was asking a question. Yes it my have been answered before, but Ash, like myself, doesn't have time to sift through pages and pages of information looking for 1 ruling, hence why she asked the question.
Who is online
Users browsing this forum: No registered users and 16 guests