***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Custom ES console upgrade

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Mon Jun 01, 2009 4:58 pm

Don't think you could get all those options in the ES? But they turned the ES console lids into compartment lids on the RA, We got lids for the drink holder, the ash tray, too compartment below the a/c control with lids.
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Mon Jun 01, 2009 6:22 pm

ACS, TCS, EBD, ABS, airbags, stock standard 5 star safety rating...

MMCS I don't know if it's an official option but my closest dealer is PM... they're mitsu's primary (only?) importer in australia... They have NO problem installing OEM parts in any model...

So not sure if you can get it (through other dealers), there's still the option of 6CD RF premium audio, I'm sure I remember that...

either way... it's a basic........
It's like making mens jeans without pockets... wtf? why do that? lol

I had a BIG dispute with my dealer over this:

I asked for a console lid and he said it couldn't be done... I said I would buy the car today if I could have a console lid like VRX fitted. He said they'd do it but it'd be expensive... $350 for the lid!

But I said ok - so, they called me while my car was being setup, said "we figured out that you can't just put the lid on an ES (duh! anyone who walks around lancers all day should have realised this!!) and that I would have to buy a VRX complete console for $850 instead if I wanted it. I explained that they should reduce the price, since they'd signed a contract saying "with console lid" and with a price on it - I should have it for that agreed price, with agreed console lid...

They told me they WERE helping me out... it would normally be over $1000...

I was taken aback...... I called 3 other dealer's parts departments for pricing.... All were over $1000 except one I haggled for a while....

so IMHO I ended up getting the shaft a bit... he knocked the $350 extra off the total price of the car and i got it with stock ES console....

Hating that open-hole in the middle of my car ever since...

Everything else the lancer kicks ass, but console and glove box - I miss my commodore - lol... (not really!)

but yeah - the RA interior's a lot more complete then ours speedie - I've seen... much nicer inside... spose they gotta make the budget models 'budget' in some way!

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Mon Jun 01, 2009 6:51 pm

I seriously dont understand why they charge so much for so little.

I understand dealers want to mark up and make a bit of profit off an OEM part sale. I think we can all agree on that.

But the amount that they mark up on the part is un-resonable.

Honestly, for a worldwide company, who mass produce EVERYTHING that goes into their cars, i really cant see that entire VRX center console costing $800 and $50 profit for the dealer. (i know it wouldnt be that much but im using it as an example).

It doesnt cost mitsu $800 to produce that part.

That would be highly un-economic. For a company that makes a lancer for something like 6-8 grand (ofey?) there is no way it would cost them $800 to get that console. Bloody rip off.

For all we know, that entire center console costs mitsu $13 to make. Its just dumb in my opinion.

Sorry. Thats my rant for today :P:P
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Mon Jun 01, 2009 7:00 pm

+1 on that rant tho tadz.... it's true... $850 is a joke... I'm making a lid the very UN-economical way and it's going to turn out a hell of a lot cheaper... it's sad... if the VRX console was a $250 - $300 option (ie. if u buy it, you have to buy it and u have 2 consoles, one ES and one VRX... if u choose it at time of purchase they can order the VRX console instead and the ES one doesn't go to waste, there's no "2 consoles" in the end... just 1 ES with a VRX console....)

It was drummed into me that "you buy an ES... you don't get a console unless you pay unreasonable amounts"

That's part of the reason I'm so itchin to get this thing up-and-going! So I can send annonymous pics to mistu and say "MWAAHAHAHAHAHAHAHAAAAA!!!!" I WIN!!!!

:-)

dumb&

Postby dumb& » Mon Jun 01, 2009 7:13 pm

Accessories are there for them to make back money they don't make on the cars.

Always have, and always will be expensive.

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Mon Jun 01, 2009 7:19 pm

You can hardly count a center console an 'Accessory though.

My mums fiesta doesnt have a center console, but it was an option when buying it. At the time of purchuse it was something like $170.

When we went after we bought it, it was something like $300.

Only the lower half of the console had to be replaced, not the whole thing though.

Still doesnt constitute a price of 800 for a piece of plastic.
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

dumb&

Postby dumb& » Mon Jun 01, 2009 7:57 pm

Spare Parts / Accessories / Money Makers.

Call em what you want, they will never be the price you want them to be.

I paid $140 for an ipod cable with a funny connection on the end. Probably cost them $5.

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Mon Jun 01, 2009 8:49 pm

yeah, that's a joke too!

I'd b CRYING if I bought a VRX and broke part of the console... Treat it like it's worth $1000 COS IT IS!!!! lol

anyways...
Got my models off to the printers today - :-)

Should hear back from him tomorrow, might even have the model by then! that'd b wicked :-)

It's not far off! (the prototype at least ;-))

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Mon Jun 01, 2009 9:34 pm

Shotgun, dibbs, pirate and everything else to see that console first!!!
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Mon Jun 01, 2009 10:26 pm

The VRX console is available on www.japanparts.com and it's a hell of a lot cheaper last I looked...

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Mon Jun 01, 2009 10:29 pm

heres where the part is. got 2 different styles in there

http://www.japanparts.com/db/partslist. ... r=&volkey=
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

Dummer

Postby Dummer » Mon Jun 01, 2009 10:33 pm

JazzyB wrote:ACS, TCS, EBD, ABS, airbags, stock standard 5 star safety rating...


ES is only 4 stars because it doesn't have the side air bags....

But yeah skimping out on a lidded console is stupid, but hey no hydraulic bonnet lifters is stupid too aswell as minimal sound proofing :?

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Mon Jun 01, 2009 10:38 pm

I gotta sound proof mine. Got bloody exams soon so i got no spare time =(.

Ill do it on the school holidays. I just picked up some of that sound deadener spray from autobarn to get me started. If that goes well, ill get another can to make a second coat and i think i will be set!!
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

Dummer

Postby Dummer » Mon Jun 01, 2009 10:47 pm

Just get Dynamat or Damplifier dude, ofey is the resident master for putting that stuff into the CJ ;)

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Mon Jun 01, 2009 10:59 pm

Lol yeah his car is a bloody tank.

Once i get some spare cash, ill be doing alot of things to my ride. but insurance and rego n all that is holding me back atm...
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 8 guests