What did you do on your car today?

24LVRX · Postby **24LVRX** » Mon Jul 22, 2013 3:37 pm

It is my main photo on my profile.. If that helps lol!!

Thanks Jordan!!

Metalstrix · Postby **Metalstrix** » Mon Jul 22, 2013 3:41 pm

real life or didnt happen. nah looks gr8

24LVRX · Postby **24LVRX** » Mon Jul 22, 2013 3:48 pm

haha.. well hopefully there will be a meet where i can show it off.. hope soon.. but after ive done my exhaust and also wrapped my side mirrors.

bunnishiwa · Postby **bunnishiwa** » Mon Jul 22, 2013 6:44 pm

Removed the 'MIVEC' badges from the sides - looks much cleaner (unlike my car....)

Seffy · Postby **Seffy** » Mon Jul 22, 2013 6:46 pm

Kimmy wrote:[b:4e55e9bb51][color=yellow:4e55e9bb51]Painted my UR strut brace to match the rest of my engine [/b:4e55e9bb51][/color:4e55e9bb51] [img:4e55e9bb51]http://www.clubcj.net/cached_images/1374465549_7_PB_1727_0.jpg[/img:4e55e9bb51]

That engine bay looks awesome!

blinklight · Postby **blinklight** » Mon Jul 22, 2013 7:49 pm

Kimmy wrote:[b:4e55e9bb51][color=yellow:4e55e9bb51]Painted my UR strut brace to match the rest of my engine [/b:4e55e9bb51][/color:4e55e9bb51] [img:4e55e9bb51]http://www.clubcj.net/cached_images/1374465549_7_PB_1727_0.jpg[/img:4e55e9bb51]

Looks awesome Kimmy

tencents · Postby **tencents** » Mon Jul 22, 2013 7:52 pm

Kimmy wrote:[b:4e55e9bb51][color=yellow:4e55e9bb51]Painted my UR strut brace to match the rest of my engine [/b:4e55e9bb51][/color:4e55e9bb51] [img:4e55e9bb51]http://www.clubcj.net/cached_images/1374465549_7_PB_1727_0.jpg[/img:4e55e9bb51]

Awesome work.

belle_tb_ES · Postby **belle_tb_ES** » Wed Jul 24, 2013 12:10 am

Reversed into a car trailer. ...so upset luckily its a scratch not a dent :'(

TheVeeMachine · Postby **TheVeeMachine** » Wed Jul 24, 2013 12:32 am

That is unfortunate.

I've found that quite often it is cheaper to replace a part completely, than to repair paint damage.

I know of one CJ Lancer that had a scratch not more than 5cm in breadth which was quoted $450 to repair (cheapest of several quotes); but only ended up costing the owner $50 for a used bumper + $50 installation.

This looks like your colour:

http://www.ebay.com.au/itm/WRECKING-DIS ... d42&_uhb=1

belle_tb_ES · Postby **belle_tb_ES** » Wed Jul 24, 2013 12:48 am

I'm going to ring around. I may have enou paint to fix it so it should bring the cost down

SIX · Postby **SIX** » Fri Jul 26, 2013 3:21 pm

Painted my Bridgestone potenzas today white !!! Added my carbon fibre Mitsubishi decals at the front and rear thanks pete !!!! Have the car a wash and polish and added my k and n warning filter decal!!!!

SIX · Postby **SIX** » Fri Jul 26, 2013 4:47 pm

TrojanHorse wrote:Busy boy mark! I wish I had time off this arvo to clean my car What do you mean you painted them white? Just the logo, not the whole sidewall I hope!

nar just the Bridgestone potenzas word lol

BZC-45S · Postby **BZC-45S** » Fri Jul 26, 2013 6:39 pm

Went to a 'reputable' tyre place to get my alignment done (I have ongoing issues with car pulling to the left, outside edge of front left tyre worn excessively). They said the wear on the outer edge is too severe it wasn't roadworthy, I can't drive it away in unroadworthy condition, insisted I had to replace it. I had just bought new tyres 6 mths ago, and they won't replace just the one worn tyre, I had to buy a pair at minimum. So flat broke this weekend I'm gutted I don't even feel like driving the thing anymore.

Lesson for all: keep up with your regular wheel alignments and rotations. Every 6 months or whenever you get an oil change, rotate your tyres. If your car develops any alignment issues, attend to it immediately don't let it slide until a time that's convenient for you or it may end up costing you a whole lot more!

What did you do on your car today?

Who is online