***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Unable to adjust the level of passenger side fog light beam

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
Temo
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Thu Nov 08, 2012 2:36 pm
Location: Quakers Hill

Unable to adjust the level of passenger side fog light beam

Postby Temo » Mon Jul 22, 2013 3:45 pm

So, i recently put in aftermarket foggies into my lancer and wanted to adjust them to my preferred level, only problem is the passanger side isnt leveling. Ive done the drivers side without any problem, but no matter how much i turn the screw on the passenger side it doesnt seem to move

Any suggestions?

User avatar
el3ment
Lancer Legend
Lancer Legend
Posts: 1050
Joined: Thu Nov 18, 2010 8:01 am

Postby el3ment » Mon Jul 22, 2013 5:15 pm

Most likely the gear that levels it is worn... unsure if that is replaceable as I haven't looked at them closely. Suggest you take it out and have a look inside it if you can see what issue is.
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray

Image

User avatar
Temo
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Thu Nov 08, 2012 2:36 pm
Location: Quakers Hill

Postby Temo » Tue Jul 23, 2013 11:42 am

So ive just opened it up and had a look, the white plastic part surrounding the leveling screw seems to be broken. Does anyone know where i can get a replacement one of these?

User avatar
el3ment
Lancer Legend
Lancer Legend
Posts: 1050
Joined: Thu Nov 18, 2010 8:01 am

Postby el3ment » Tue Jul 23, 2013 4:29 pm

AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray

Image

User avatar
Temo
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Thu Nov 08, 2012 2:36 pm
Location: Quakers Hill

Postby Temo » Tue Jul 23, 2013 4:53 pm

LOL, yeah its not worth buying a whole new kit just for the plastic screw.


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 16 guests