Okay so mines all installed and working well...
one question i have is for the power pro... i have the power hooked up to the hazard lights, but the unit still says its turning off when i turn the car off... ive given the car a shake and it doesnt seem to start recording a 'parking incident' what am i missing?
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Dashcam Group Buy Rd 4.1 Aug'14
Moderator: Senior Moderators
Set it up correctly? Look at the instructions, make sure the switches are set up for how many hours you want it on, and what voltage you are on, 12 or 24... then make sure the main switch is on.
I thought the On/Off was a "Always On Override" switch at first, but its not. So make sure that is on. I also noticed that If I turned the car to acc but don't start it, then turn it back off again, It turns off. I think its because there is a slight surge that is causing the relay to flip back and forward and get stuck off...
I thought the On/Off was a "Always On Override" switch at first, but its not. So make sure that is on. I also noticed that If I turned the car to acc but don't start it, then turn it back off again, It turns off. I think its because there is a slight surge that is causing the relay to flip back and forward and get stuck off...
- SchumieFan
- Lancer ES/EX
- Posts: 182
- Joined: Thu Dec 01, 2011 9:33 pm
- Location: Sydney
- JaZira5
- Lancer VR/GT
- Posts: 213
- Joined: Sat Mar 12, 2011 3:03 am
- Location: Hawthorne, Queensland, Australia
SchumieFan wrote:Never mind, ive realised after watching a video if got the acc and batt wires reversed... whoops... lucky easy fix
Glad you managed to find the issue. I was thinking the problem was something along those lines. Since mine is working as it should.
citris.87 wrote: I thought the On/Off was a Always On Override switch at first, but its not. So make sure that is on. I also noticed that If I turned the car to acc but dont start it, then turn it back off again, It turns off. I think its because there is a slight surge that is causing the relay to flip back and forward and get stuck off...
When I have the Magic Pro switch to ON, its constantly ON and not changing from ON when I turn the key. Though when I have the Magic Pro switch to OFF, and I don't have the key in the barrel the Blackvue only activates when I turn the key to ON. Though, in both instances when I turn the key to ignite the engine it always turns the Blackvue OFF then ON, due to the surge. Its like the radio being turned on before the engine goes on.
Either way, I'll give it a good look to see if what has happened to yours happens to mine. ^_^
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
OK so we're back with Round 2.
Seller wants to do an X'mas Special.
The prices I've been quoted are pretty good for Australian Stock. For < 20 pieces we're A$21 cheaper than eBay.
Once we cross 20 pieces, the discount will go double!
We're also seeing RColt.net and FT86 clubs join us. So it may not be too hard to get to this number.
Let's see how we go... .
Seller wants to do an X'mas Special.
The prices I've been quoted are pretty good for Australian Stock. For < 20 pieces we're A$21 cheaper than eBay.
Once we cross 20 pieces, the discount will go double!
We're also seeing RColt.net and FT86 clubs join us. So it may not be too hard to get to this number.
Let's see how we go... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- Mystique
- Lancer MASTER
- Posts: 1729
- Joined: Mon Sep 30, 2013 8:28 pm
- Location: Launceston, Tasmania, Australia
After what happened the other night... I really think I need to invest in one of these... may have to wait until after Christmas and after I get my baby fixed though Damn!
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
Weekender: 2009 MY09 Ralliart Hatch
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
If it flies with the rest of the car club reps, the price is going to be stupid. So get some money put together!!
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I'm assuming you mean rear FACING.
The DR-550GW is a dual cam version so in the box you get 2 cams in the box... .
The DR-550GW is a dual cam version so in the box you get 2 cams in the box... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 33 guests