***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* 7" DVD/SAT Nav GB (ROF1703N-1) - DEC'12

For all ClubCJ Members.

Moderator: Senior Moderators

Locked
robert43
Lancer ES/EX
Lancer ES/EX
Posts: 109
Joined: Sat Dec 01, 2012 1:18 pm
Location: wagga wagga

Postby robert43 » Thu Jan 03, 2013 3:15 pm

Why do you say + rather than - on the battery? I would like to know your reason?
User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Thu Jan 03, 2013 3:24 pm

Agreed re battery terminal. Every install i've ever done has been with the negative disconnected
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot :)
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar



Noli Timere Messorem
robert43
Lancer ES/EX
Lancer ES/EX
Posts: 109
Joined: Sat Dec 01, 2012 1:18 pm
Location: wagga wagga

Postby robert43 » Thu Jan 03, 2013 8:11 pm

Hi the reason why I asked is because I seen people do the + 1st & the spanner has hit the body of the car which is the - & been very intresting .LOL
User avatar
dannyboi
Lancer Evolution
Lancer Evolution
Posts: 818
Joined: Sat Jun 26, 2010 8:53 pm
Location: Sydney, Australia

Postby dannyboi » Thu Jan 03, 2013 8:20 pm

I think they've got the red cover over the positive terminal on my stock battery, so they've intentionally made it harder to remove the positive terminal.
robert43
Lancer ES/EX
Lancer ES/EX
Posts: 109
Joined: Sat Dec 01, 2012 1:18 pm
Location: wagga wagga

Postby robert43 » Thu Jan 03, 2013 9:27 pm

dannyboi wrote:I think theyve got the red cover over the positive terminal on my stock battery, so theyve intentionally made it harder to remove the positive terminal.

More like so you know that goes on the + also most battries have a red & black ring on the terminals
User avatar
RAwannabe
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 389
Joined: Sun Jan 09, 2011 12:29 am
Location: NSW Australia

Postby RAwannabe » Thu Jan 03, 2013 10:20 pm

Crift wrote:Whats the new maps like compared to the old ones? Apart from the Aussie voice?

I wonder why the car icon is removed from the map visual and now It's only using a tiny tiny dot representing your car?
I can't tell where my car exactly with the dot and confusing where you suppose to turn, and there is no option to add bigger icon.
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Fri Jan 04, 2013 3:15 am

I've checked everything:(
I finally found the fuse that blew that controls all the interior lights..
But can some be kind enough and give me step by step instructions how to install. I keep blowing fuses lol
Thanks guys
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
Image
User avatar
cammag5
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Wed Jun 01, 2011 1:47 pm
Location: Brisbane, Australia

Postby cammag5 » Fri Jan 04, 2013 10:20 am

Just so you guys know the can bus allows the head unit to interpret everything the car does with out having to individually wire each connection to each device/switch on the car. So you need the can bus for the unit to recognise when you turn the head lights on or off, when the hand brake is on or off and when the car is in reverse etc. The supplier has give us a bum steer the can bus does literally nothing for the audio, all the audio connections are through the main plug to the back of the unit so it doesnt matter if you have the rockford or not because the can bus does nothing for the rockford.

So in summary EVERYONE needs the canbus and this head unit is NOT compatible with the rockford system.
Locked

Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 17 guests