***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* 7" DVD/SAT Nav GB (ROF1703N-1) - DEC'12

For all ClubCJ Members.

Moderator: Senior Moderators

Locked
User avatar
brendon1555
Lancer Newbie
Lancer Newbie
Posts: 39
Joined: Fri Sep 28, 2012 6:20 pm
Location: Wagga Wagga

Postby brendon1555 » Thu Jan 03, 2013 8:54 am

Just got my unit today (thanks timmo91) and dont know where the best place for the GPS antenna is. Anyone have any tips?
Silver 2010 Lancer ES
Image
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Thu Jan 03, 2013 9:54 am

Hey crift, thanks!

I think it keeps shorting out because I didn't connect the ground cable in correctly?

I found the fuse I blew..

I disconnected the battery and did it. But as I connect the battery it just blows;(

I'm not sure where to put the ground cable. All the other cables I just plug and play.
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
Image
User avatar
Zaki
Lancer VR/GT
Lancer VR/GT
Posts: 205
Joined: Fri Nov 25, 2011 12:22 am
Location: Australia

Postby Zaki » Thu Jan 03, 2013 10:40 am

Does it matter that he has sub n amp hooked up to the stock head unit ? N is trying to connect it
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Thu Jan 03, 2013 10:42 am

Yeah I'm disconnecting the negative. Same thing.

Ill try and see what's happening..
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Thu Jan 03, 2013 10:55 am

I got a sub and amp installed. But that's through my rear speakers. I wouldn't need a canbus for that?
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image
User avatar
brendon1555
Lancer Newbie
Lancer Newbie
Posts: 39
Joined: Fri Sep 28, 2012 6:20 pm
Location: Wagga Wagga

Postby brendon1555 » Thu Jan 03, 2013 11:30 am

Well, got mine installed with no issues. Was actually easier than I thought it would be. Now to take it for a spin and test the GPS.

Hope you can sort yours out Dennis.
Silver 2010 Lancer ES

Image
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Thu Jan 03, 2013 11:34 am

Can anyone take photos and show me how they connected at the back of HU?

And now my stock headunit doesn't work....
Checked all fuses and they are fine:/
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image
User avatar
Carl-BVI
Lancer ES/EX
Lancer ES/EX
Posts: 176
Joined: Sat Nov 26, 2011 2:41 pm
Location: NSW, Wollongong

Postby Carl-BVI » Thu Jan 03, 2013 11:49 am

Check the ribbon is connected, all the way in AND the right way, Its small and i often forget it
User avatar
Carl-BVI
Lancer ES/EX
Lancer ES/EX
Posts: 176
Joined: Sat Nov 26, 2011 2:41 pm
Location: NSW, Wollongong

Postby Carl-BVI » Thu Jan 03, 2013 11:50 am

And now my stock headunit doesn't work....
Locked

Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 1 guest