***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Engine light on after big puddle

Servicing, Oil Changes, Fluids & Much More.

Moderators: Moderators, Senior Moderators

User avatar
mcmusc
Lancer ES/EX
Lancer ES/EX
Posts: 130
Joined: Tue Dec 06, 2011 3:55 pm
Location: Riverstone, NSW, Australia

Engine light on after big puddle

Postby mcmusc » Wed Apr 18, 2012 8:52 pm

Hey guys, not sure is this is the right forum, however,

As those from western sydney know right now, the rain is terrential at the moment and i took my eyes off the road for a second on a dim back street and went through a pretty solid puddle at 60km/h

after coming out of the puddle, the engine sputtered a bit and seemed jolty and i could tell by the exhaust something wasnt right, as it started popping and cracking a touch.

after about 20 seconds of driving though the check engine light came on but the engine was running as normal.

The check engine light is still on even though it seems fine, what should i do?

Thanks in advance,

Matt

User avatar
AdamD
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 325
Joined: Fri Oct 14, 2011 4:40 pm
Location: Southern Highlands

Postby AdamD » Wed Apr 18, 2012 8:57 pm

Are you running a cold air intake? Maybe some water got sucked in?

User avatar
mcmusc
Lancer ES/EX
Lancer ES/EX
Posts: 130
Joined: Tue Dec 06, 2011 3:55 pm
Location: Riverstone, NSW, Australia

Postby mcmusc » Wed Apr 18, 2012 8:59 pm

yeah i am, i think i may have sucked a touch in but do you think i did harm?

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Wed Apr 18, 2012 9:19 pm

matthew, dont worry about it, the sensors are a bit touchy about getting wet, it`ll clear itself.
try doing half a dozen ignition ons, that should reset it.
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Wed Apr 18, 2012 9:28 pm

mcmusc wrote:yeah i am, i think i may have sucked a touch in but do you think i did harm?

Dont worry about it. I did the same, RHS was quite deep in water and left side was no water. I went through it at around 80kmh/s. Threw a sensor something about an intake manifold or something. I cleared it and hasn't come back.
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
Dirtee
Lancer Legend
Lancer Legend
Posts: 1297
Joined: Mon Sep 26, 2011 8:31 pm
Location: Canberra, Australia
Contact:

Postby Dirtee » Thu Apr 19, 2012 12:12 am

Good work pete :P ^

It was raining today and i was sure i was gunna get a warning light with all the water and the CAI
2010 Lancer Es - My Ride
Wanna be customiser!!
ACT Rep 2012
CJLancerInstalls - How-To's!

User avatar
Shifta
Lancer ES/EX
Lancer ES/EX
Posts: 175
Joined: Sat Oct 16, 2010 12:47 pm
Location: Tannum Sands, Australia

Postby Shifta » Thu Apr 19, 2012 1:57 am

just take off and then put back on the negative of your battery, resets it straight away :)
like metal/hardcore music? check out my band - http://www.facebook.com/IngridStarver

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Thu Apr 19, 2012 6:42 am

lol, pete parrots me and timmy says good work pete, whats with that timmy?
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
AJjnr86
Lancer Legend
Lancer Legend
Posts: 1338
Joined: Fri Jun 18, 2010 8:22 pm
Location: Maitland, NSW

Postby AJjnr86 » Thu Apr 19, 2012 8:09 am

U would have picked up a bit of water, i did the same thing on the way down to melbourne with Steve (good times) mine cleared ok after a restart and mine was close to dieing. The water upsets the air mass sensor, i had a customer come in with a airmass sensor that was buggered, so i swapped my sensor for theirs as it was the thursday afternoon before the easter weekend, i just used my landy and got a brand new sensor the following wednesday, customer was happy to have their car running for the long weekend
Image

OHH YEA!!!!

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Thu Apr 19, 2012 8:28 am

yeah, mine did it also after going through the crick at QMF, more good times
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
mcmusc
Lancer ES/EX
Lancer ES/EX
Posts: 130
Joined: Tue Dec 06, 2011 3:55 pm
Location: Riverstone, NSW, Australia

Postby mcmusc » Thu Apr 19, 2012 9:17 am

oh phew, thanks guys, ill reset it. i've gone through a worse puddle about a year ago where it starts smoking from the engine bay lol but no check engine light, haha.

anyway it seems to run fine so ill just reset it.

thanks guys!

Bulbaspire
Lancer Learner
Lancer Learner
Posts: 4
Joined: Thu Dec 27, 2012 8:44 pm
Location: Sydney australia

Postby Bulbaspire » Thu Dec 27, 2012 10:00 pm

You guys had some luck there, happened to s friend in a honda with cold air intake and bent the conrods requiring a rebuild

Andrew232
Lancer Learner
Lancer Learner
Posts: 6
Joined: Mon Apr 01, 2013 3:56 pm
Location: USA

Postby Andrew232 » Tue Apr 02, 2013 5:09 pm

don't really know about it, the receptors are a bit sensitive about getting wet, it`ll obvious itself. try doing some key ons, that should totally reset it.. . .
. . .
Here is a selection of Surfers Rent A Car's
Last edited by Andrew232 on Mon Oct 21, 2013 5:51 pm, edited 2 times in total.

himynameisdaniel
Lancer Evolution
Lancer Evolution
Posts: 824
Joined: Mon Feb 14, 2011 3:58 pm
Location: Adelaide

Postby himynameisdaniel » Tue Apr 02, 2013 5:57 pm

It must of been a lot of water to actually cause damage to the engine.
At normal operating temps in recent manufactured cars, drops or trickle of water (should being the keyword) evaporate instantly due to the high heat.
Thats not to say that you can be reckless and barrel through a giant puddle.
If you go deep and fast enough you will probably simply push the water up the CAI causing the failure described above
But I cannot see this happening to the stock air intake systems (RA\NA) due to the design unless you plow into a lake....

I guess it depends on how the air intake system is design and how it feeds to the engine.


Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 57 guests