***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

FS/EOI -- RA/EVOX part out

Want to sell something, Post it up and sell it here. *Conditions Apply- Please read - http://clubcj.net/viewtopic.php?t=2085

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Fri Dec 07, 2012 5:24 am

PM'd

Will be sad to see you go. You're build thread and self-tune efforts have definately been an inspiration
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot :)
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar



Noli Timere Messorem
User avatar
Glenn
Lancer Ralliart
Lancer Ralliart
Posts: 737
Joined: Fri Jan 21, 2011 9:54 am
Location: Brisbane Northside

Postby Glenn » Fri Dec 07, 2012 7:19 am

my beloved blacked out projectors are up for grabs as well.

yes they are pricey but if you can find/make a set for cheaper than that, let me know and I'll take 2!
Last edited by Glenn on Fri Dec 07, 2012 10:06 am, edited 1 time in total.
User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Fri Dec 07, 2012 10:02 am

I'd be interested in the projectors
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h
User avatar
Latino_Ralliart
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 337
Joined: Sat Feb 26, 2011 9:07 pm
Location: Sydney

Postby Latino_Ralliart » Fri Dec 07, 2012 10:27 am

How much you looking to sell the BC Coilovers for delivered to Sydney.

PM me if your keen.

Cheers
User avatar
Glenn
Lancer Ralliart
Lancer Ralliart
Posts: 737
Joined: Fri Jan 21, 2011 9:54 am
Location: Brisbane Northside

Postby Glenn » Fri Dec 07, 2012 10:45 am

Coilovers will be making the trip with me.
User avatar
ijustatecurry
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 395
Joined: Thu Jan 20, 2011 5:00 pm
Location: Glen Waverley, VIC Australia

Postby ijustatecurry » Fri Dec 07, 2012 11:41 am

Did you have any front sways or struts on there Glenn?
All bleeding stops eventually!
User avatar
Glenn
Lancer Ralliart
Lancer Ralliart
Posts: 737
Joined: Fri Jan 21, 2011 9:54 am
Location: Brisbane Northside

Postby Glenn » Fri Dec 07, 2012 12:33 pm

nope just the factory top strut bar. She's loosey goosey. No, for daily driving and straight line at the drags i never saw the need for them. Maybe if i take the next one on a track with some corners i might see what all the hype is about
User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Fri Dec 07, 2012 2:10 pm

I'd also be interested in some of your carbon parts if you decide to sell them
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h
User avatar
rokpapaziz
Lancer Legend
Lancer Legend
Posts: 1344
Joined: Sat Aug 13, 2011 12:18 am
Location: Brisbane

Postby rokpapaziz » Fri Dec 07, 2012 5:27 pm

You are all Lucky I'm not in Brissy right now. I'd be cleaning this guys garage out for him! Sort of bummed you are leaving Glenn.
User avatar
CA
Lancer ES/EX
Lancer ES/EX
Posts: 135
Joined: Tue Nov 09, 2010 11:47 am
Location: Sydney, Australia

Postby CA » Wed Dec 12, 2012 9:55 am

Question regarding the projectors, the AFS, you mentioned you dont have anything in there and it doesnt work? Can you please explain a bit more? I have an X and am interested but would like to retain my AFS if possible.
User avatar
Glenn
Lancer Ralliart
Lancer Ralliart
Posts: 737
Joined: Fri Jan 21, 2011 9:54 am
Location: Brisbane Northside

Postby Glenn » Wed Dec 12, 2012 10:35 am

I assume they would work if placed on an evo that already has the AFS system enabled.

I was of the understanding that this needed to be done by the dealership/ETACS so on my RA it wasn't "on" and it didnt really interest me so i never put bulbs in there or looked into it further.

So not broken, just not currently in use
Image MAP Powered / Beeble/Self Tuned / Self Built
User avatar
chukatsung
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Mon Oct 15, 2012 9:06 am
Location: Sydney, AU

Postby chukatsung » Thu Dec 13, 2012 6:48 am

What sort of BOV are you running at the moment?
I am interested to have my stock plastic BOV upgraded to a metal EVO X BOV, if you have one =]
I make vinyl stickers!
PM me for details
Or Click here to visit my Facebook page
User avatar
Glenn
Lancer Ralliart
Lancer Ralliart
Posts: 737
Joined: Fri Jan 21, 2011 9:54 am
Location: Brisbane Northside

Postby Glenn » Wed Dec 19, 2012 1:19 pm

Bump - car's getting taken apart starting this weekend

also up for grabs

JDM password intake/engine cover/ radiator covers
Retail 1600$ bargain at 1000$
must be sold as a set
Image MAP Powered / Beeble/Self Tuned / Self Built
User avatar
rokpapaziz
Lancer Legend
Lancer Legend
Posts: 1344
Joined: Sat Aug 13, 2011 12:18 am
Location: Brisbane

Postby rokpapaziz » Wed Dec 19, 2012 1:21 pm

Do you want some help/someone to watch you pull your car apart?

edit: The gravity of the situation just hit me. This is a friggin tragedy this car with the latest setup must of only done a few runs before it gets pulled down
Last edited by rokpapaziz on Wed Dec 19, 2012 1:27 pm, edited 1 time in total.
User avatar
Glenn
Lancer Ralliart
Lancer Ralliart
Posts: 737
Joined: Fri Jan 21, 2011 9:54 am
Location: Brisbane Northside

Postby Glenn » Wed Dec 19, 2012 1:25 pm

thanks but should be good. gotta clean out the garage as well so it'll be stop and go over the week.
Image MAP Powered / Beeble/Self Tuned / Self Built
Post Reply

Return to “For Sale Section”

Who is online

Users browsing this forum: No registered users and 17 guests