***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* In-Car/indicator LEDs - CCJ GB Dec'09 R2
Moderator: Senior Moderators
- Josh_Emerton
- Lancer MASTER
- Posts: 1920
- Joined: Fri Oct 17, 2008 10:49 pm
- Location: Cairns, QLD, Australia
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Well 60 as you can see is REALLY bright. AS if you were at home with the lights ALL ON. It can also be blinding. Having said that, some people wear shades ALL the time and some people just want it really bright to attract attention to themselves.
The considerations you should have is that at times, you need to read maps and you need to drive with the map lights on. This can really impede your vision in the night when your interior is REALLY bright and exterior very dark. Also you don't want to stand out so much when you're in a dark parking lot when you open the door. I chose the 20 one since I just wanted it brighter than stock and white light. 15 is only slightly brighter than stock and in white. I wanted it to be clearly brighter and be able to see into the footwells when I opened the door.
I also wanted to add that those with the Reverse parking camera should consider taking the 48LED Reverse Lights since it'll really absolutely brighten everything you see!!
The considerations you should have is that at times, you need to read maps and you need to drive with the map lights on. This can really impede your vision in the night when your interior is REALLY bright and exterior very dark. Also you don't want to stand out so much when you're in a dark parking lot when you open the door. I chose the 20 one since I just wanted it brighter than stock and white light. 15 is only slightly brighter than stock and in white. I wanted it to be clearly brighter and be able to see into the footwells when I opened the door.
I also wanted to add that those with the Reverse parking camera should consider taking the 48LED Reverse Lights since it'll really absolutely brighten everything you see!!
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
tadz0rz wrote:Okay im a little confused on buying these atm....
I just want the dome light and the reverese lights....is there any way i can just buy those 2 or do i have to buy the whole pack thing....
Yes you can get those alone though there won't be a special price. It'll be at normal prices.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
criteek wrote:can any of them be used in the boot?
All of them can as they all run 12V. You just need to snip some wires and wire them to some spades and slot them into the current socket for the boot lamp. However you might consider using the cabin light ones.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
The package offered to us is as follows:
2 x 1.5 Watt T10 pole light
2 x 15 SMT map light
1 x 30 SMT cabin light
1 pair 1 x 1.5 watt license plate
2 x 39 led T20 reverse light
for A$90.00. That's an A$30.00 reduction on his RRP.
Not inclusive of postage. I don't see that exceeding A$10.00 for those outside VIC.
2 x 1.5 Watt T10 pole light
2 x 15 SMT map light
1 x 30 SMT cabin light
1 pair 1 x 1.5 watt license plate
2 x 39 led T20 reverse light
for A$90.00. That's an A$30.00 reduction on his RRP.
Not inclusive of postage. I don't see that exceeding A$10.00 for those outside VIC.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
tadz0rz wrote:Okay so if i just wanted 1 blue cabin/dome light and a pair of reverese lights, any idea how much that will be shipped?
I'm asking prices now. Shipping to VIC would probably be free but I'm not sure at the moment if my folks can find someone to bring them in.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
ANDROS wrote:ofey can you please find out seperate prices for these items ?
He's been offline all day. I've already sent him several mails and tried calling. We'll all have to wait for him.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Group Buys Service”
Who is online
Users browsing this forum: Google [Bot] and 12 guests