***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

QLD -Merlin ECU Tuning- 17-18/11/12

Local QLD State News, Meets, Cruises, Information & Talk.

Moderators: Moderators, Senior Moderators

User avatar
rokpapaziz
Lancer Legend
Lancer Legend
Posts: 1344
Joined: Sat Aug 13, 2011 12:18 am
Location: Brisbane

Postby rokpapaziz » Sat Nov 10, 2012 10:18 am

Yeah I know exactly what your ideas are, I have/had the same. It kind of depends on how your dealer thinks about you as the owner as well.

I just did a base map flash first after getting the tactrix, then a couple of weeks later I ordered a boost pill when I realized how easy it was to change back to stock. Takes like 10 minutes.


lattaj79 wrote:[quote:c5ef3c1af5=rokpapaziz][quote:1d18e2215c=lattaj79]If i get my car tuned by merlin and flash ecu back to stock, will the mitsubishi dealership know i have flashed the ecu? In two minds about tuning and warranty. If i just use a boost pill and tune, they should not know im flashing between stock and tuned maps? Cause theres no mods that can be seen?[/quote:1d18e2215c] Ive done what you are talking about heaps of times, and i still claim warranty stuff. They cant tell apparently.[/quote:c5ef3c1af5] Thats great to know, all is want is for the car to be a lot more responsive across the rev band and instant response from stop whilst maintaining good fuel economy, I know the harder i drive the more fuel i will use up, and of course anyone would accept that, no changing basic combustion principles lol, but even driving normally and a bit of spirited driving here and there and the petrol light comes on lol Then when its time to service the car, flash back to standard rom and the dealers are non the wiser. Its probably worth while asking the dealer servicing the car what mods they do allow to service under warranty, as I have heard some have a cat back exhaust, lowered springs and aftermarket rims and they are ok with it, as long as the dealer does the installation (generally more expensive I know) but if they ok with it and honour factory and dealer warranty, then its a bonus for me.

User avatar
jerryme
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Wed Nov 03, 2010 10:37 am
Location: Brisbane, Australia

Postby jerryme » Sat Nov 10, 2012 5:42 pm

I'm a maybe at the moment. Depending on money.

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Sat Nov 10, 2012 8:06 pm

Image
CLUB CJ CAR AUDIO VENDOR
Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB

2013 WORLD TITLE
2012 QLD State Champion
2008 Australian Champion

Image

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Sun Nov 11, 2012 7:10 am

bump
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
cammag5
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Wed Jun 01, 2011 1:47 pm
Location: Brisbane, Australia

Postby cammag5 » Sun Nov 11, 2012 8:47 am

IMPORTANT!

I have spoke to merlin and we need to email him copy of a few of our ecu roms so he definitely has the ecu definitions before he get here so hes not having to make them on the day. We need a copy of whitenight, jonno2012es and mine. So in the next few days the 3 of us will have to catch up with one of the members with a cable to get a copy of the rom. I have a blue tooth obdII connector which works fine but im not sure what program to use

User avatar
rokpapaziz
Lancer Legend
Lancer Legend
Posts: 1344
Joined: Sat Aug 13, 2011 12:18 am
Location: Brisbane

Postby rokpapaziz » Sun Nov 11, 2012 8:59 am

I'm pretty sure I can read those roms and save them with the tactrix and Ecuflash. Can test first if you like.

cammag5 wrote:IMPORTANT! I have spoke to merlin and we need to email him copy of a few of our ecu roms so he definitely has the ecu definitions before he get here so hes not having to make them on the day. We need a copy of whitenight, jonno2012es and mine. So in the next few days the 3 of us will have to catch up with one of the members with a cable to get a copy of the rom. I have a blue tooth obdII connector which works fine but im not sure what program to use

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Sun Nov 11, 2012 4:44 pm

marcus, are u ok with copying the roms then emailing them to merlin?
if so ken and jonno and cam need to meet up with you in the next couple of days.

its only a 10 minute job :)
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
cammag5
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Wed Jun 01, 2011 1:47 pm
Location: Brisbane, Australia

Postby cammag5 » Sun Nov 11, 2012 5:08 pm

Ill get home tomorrow morning (im away atm) and try using my connector with Ecuflash, if it works ill go and catch up with ken and jonno in the next day or two, around there work times.

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Sun Nov 11, 2012 5:54 pm

i thought u needed a tactrix cable?
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
rokpapaziz
Lancer Legend
Lancer Legend
Posts: 1344
Joined: Sat Aug 13, 2011 12:18 am
Location: Brisbane

Postby rokpapaziz » Sun Nov 11, 2012 7:09 pm

ok Cam try your OBD 2 first, if it doesn't work I can copy the ROMS and send the files to Merlin

User avatar
Dean
Lancer ES/EX
Lancer ES/EX
Posts: 119
Joined: Fri May 28, 2010 9:44 am
Location: Gold Coast

Postby Dean » Sun Nov 11, 2012 10:37 pm

Put me down for this 100%, I live on the Gold coast and am happy to drive up any time. Does anybody have a ballpark figure of the amount of money we will be paying in excess of $250 to cover the air-fares and what not?

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Mon Nov 12, 2012 6:17 am

i`ll put u on cams list Dean, 2010 activ.
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Mon Nov 12, 2012 7:53 am

Does anybody have a ballpark figure of the amount of money we will be paying in excess of $250 to cover the air-fares and what not?



it depends on what type of flight merlin chooses and when he comes up dean but i`d imagine it`d be less than $50 each ballpark.
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
merlin
Alumni
Alumni
Posts: 374
Joined: Wed Feb 09, 2011 3:51 pm
Location: Sydney, Australia

Postby merlin » Mon Nov 12, 2012 11:52 am

Arriving Saturday 7.30am.

Depart Sunday 5.00pm.

Should be fun!


Return to “Queensland”

Who is online

Users browsing this forum: No registered users and 73 guests