Hello, can anyone help?
I purchase a set of front EVO X brembos and EVO X enkei wheels for my RA thinking they will fit.
(it worked on my 01 WRX)
The wheels off set and size means that they are too wide.
Now I am sure if the Brembos will fit?
Has anyone fitted Brembos to a RA? Or does anyone know if they will work with the stadard RA wheels. I am tipping I will need new wheels.
Cheers Andrew
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Brembo's on a RA
Moderator: Senior Moderators
- Redtwincam
- Lancer Learner
- Posts: 7
- Joined: Fri Sep 10, 2010 9:59 pm
- Location: melbourne
Brembo's on a RA
Blue Ralliart
- whitenight
- Lancer Legend
- Posts: 1433
- Joined: Tue Aug 24, 2010 4:16 pm
- Location: QLD
the brembo's won't fit the enkei rims will fit with a bit of negative camber at the front and also you need to lower it .
also you have posted this in the wrong section it should be under ralliart performance or brakes this topic has been discussed before please do a search by using the search icon up in the top right hand corner of your screen.
PLEASE do not take offence to this post only pointing it out as you are new
also you have posted this in the wrong section it should be under ralliart performance or brakes this topic has been discussed before please do a search by using the search icon up in the top right hand corner of your screen.
PLEASE do not take offence to this post only pointing it out as you are new
- zedd82
- Lancer Evolution
- Posts: 892
- Joined: Tue May 12, 2009 11:13 am
- Location: Brisbane, QLD, Australia
I beleive the only way to make Brembos fit an RA is to cut the RA brake mounts off and put new ones on. Definately not recommended at all.
The Brembos are a different type of brake so you can't just have dog bones made up to make them fit.
The Brembos are a different type of brake so you can't just have dog bones made up to make them fit.
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h
- squala
- Post Monster
- Posts: 2869
- Joined: Wed Jun 03, 2009 12:23 am
- Location: Fines City, VIC, Australia
zedd82 wrote:I beleive the only way to make Brembos fit an RA is to cut the RA brake mounts off and put new ones on. Definately not recommended at all. The Brembos are a different type of brake so you cant just have dog bones made up to make them fit.
So what's a good alternative to Brembos to make an RA stop faster?
///// /////
7 airbags
6-speed SST
5-star safety
4-wheel drive
3-diamond badge
2 overhead cams
1 awesome ride
0 demerit points and gutter rash
7 airbags
6-speed SST
5-star safety
4-wheel drive
3-diamond badge
2 overhead cams
1 awesome ride
0 demerit points and gutter rash
Just for a bit of info, I have a big brake kit on my ES, but with aftermarket wheels. You will find usually the back calipers will fit, (fyi my offset are 50 all way around) ... with the front caliper however I had to use a spacer, around 12mm, then it just fitted.
Brand is JBT.
Make a big difference, but good tyres are just as necessary if you want the stopping power.
Brand is JBT.
Make a big difference, but good tyres are just as necessary if you want the stopping power.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
What the old man said ... GOSPEL. Unless you're like Twatty's Evo, most of you boys will NEVER need Brambos.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Rules & Information”
Who is online
Users browsing this forum: No registered users and 28 guests