***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

copy of Accolade's Rear lip/diffuser - Bodykits Kingdom

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
RAwannabe
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 389
Joined: Sun Jan 09, 2011 12:29 am
Location: NSW Australia

Postby RAwannabe » Fri Sep 14, 2012 5:31 pm

according to your last photo, push in the shark fin bit then you will know where to drill holes to pull it up.

User avatar
chunky9
Lancer Evolution
Lancer Evolution
Posts: 821
Joined: Sun May 27, 2012 10:21 pm
Location: Sydney, New South Wales

Postby chunky9 » Fri Sep 14, 2012 5:54 pm

wow what on earth is going on with the centre
but it does look sexy indeed ;)

User avatar
RAwannabe
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 389
Joined: Sun Jan 09, 2011 12:29 am
Location: NSW Australia

Postby RAwannabe » Fri Sep 14, 2012 6:15 pm

you also need a smaller license plate

User avatar
Edmi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 420
Joined: Sun Sep 18, 2011 1:17 pm
Location: Melbourne

Postby Edmi » Fri Sep 14, 2012 8:43 pm

RAwannabe wrote:according to your last photo, push in the shark fin bit then you will know where to drill holes to pull it up.

Ok thanks man will have a look at it and apparently my number plate will fit once the lip is on, it may hang over slightly



chunky9 wrote:wow what on earth is going on with the centre but it does look sexy indeed ;)

Yeh I know it's a bit odd, sure does :) makes it look similar to the rear of the ralliart

User avatar
sleepy
Lancer VR/GT
Lancer VR/GT
Posts: 255
Joined: Fri Jul 29, 2011 6:28 pm
Location: Sydney, Australia

Postby sleepy » Tue Sep 18, 2012 8:40 pm

Looking awesome Ben! Considering getting either this or I'll try to push my luck and source a Ralliart rear bar... (any Ralliart owner want to lend their VIN? :P)

Only problem I have with this is where the reverse sensors sit on mine, which is just below the license plate.

User avatar
gus0068
Lancer Newbie
Lancer Newbie
Posts: 61
Joined: Mon Dec 19, 2011 7:51 pm
Location: Sydney Australia

Postby gus0068 » Tue Sep 18, 2012 9:24 pm

My mrs has the Lancer Platinum in white this could be the go

User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Tue Sep 18, 2012 9:48 pm

How is the fitment going Ben ?
Image
Angels Are Sometimes Disguised As Friends

User avatar
Edmi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 420
Joined: Sun Sep 18, 2011 1:17 pm
Location: Melbourne

Postby Edmi » Wed Sep 19, 2012 10:39 am

sleepy wrote:Looking awesome Ben! Considering getting either this or Ill try to push my luck and source a Ralliart rear bar... (any Ralliart owner want to lend their VIN? :P) Only problem I have with this is where the reverse sensors sit on mine, which is just below the license plate.


Cheers mate, It will look better once its on and the xforce exhaust is installed. Yeh i was considering the ralliart rear, until i found out the price just to get the bumper with no painting or fitting so thats why i went with this lip. Also i would have had to move or buy new reverse sensors.



gus0068 wrote:My mrs has the Lancer Platinum in white this could be the go

It finishes the rear of the lancer off nicely Chris. The stock rear in my opinion just does not do it for me.

DORA_ANNE wrote:How is the fitment going Ben ?

Its not actually on the car yet Doreen but from the photos when i trail fitted it, Its pretty good. Will post up more pics when the lip is on so u can get a better idea.

User avatar
Edmi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 420
Joined: Sun Sep 18, 2011 1:17 pm
Location: Melbourne

Postby Edmi » Tue Sep 25, 2012 1:12 pm

Finally got the rear lip put on the car this morning. It looks Sick :D

I definitely recommend it, really finishes of the rear of the lancer nicely.
There are 1 or 2 gaps but there not really that noticeable.

Will post up pics when the glue dries and i can take the tape off

User avatar
Edmi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 420
Joined: Sun Sep 18, 2011 1:17 pm
Location: Melbourne

copy of Accolade's Rear lip/diffuser **UPDATE**

Postby Edmi » Tue Sep 25, 2012 6:06 pm

Old and new! :)


ImageImageImageImageImage

User avatar
Bags
Lancer Newbie
Lancer Newbie
Posts: 78
Joined: Sat Aug 20, 2011 2:18 pm
Location: Melbourne

Postby Bags » Tue Sep 25, 2012 6:36 pm

Looks good mate.
Now go get some coilovers! Haha

User avatar
Edmi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 420
Joined: Sun Sep 18, 2011 1:17 pm
Location: Melbourne

Postby Edmi » Tue Sep 25, 2012 6:39 pm

thanks mate. i really want to but then i wont be able to get up the driveway. I'm risking putting a v lip on haha

User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Tue Sep 25, 2012 9:03 pm

Looking Good Ben :D Did they have to do anything to your exhaust to make it fit better ? And was it the panel beaters shop who installed & painted ?
Image

Angels Are Sometimes Disguised As Friends

User avatar
Edmi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 420
Joined: Sun Sep 18, 2011 1:17 pm
Location: Melbourne

Postby Edmi » Tue Sep 25, 2012 11:40 pm

DORA_ANNE wrote:Looking Good Ben :D Did they have to do anything to your exhaust to make it fit better ? And was it the panel beaters shop who installed & painted ?


Thanks Doreen. Yea my exhaust place I go to had to cut off the exhaust pipe connecting to the muffler and fuse it back together with the tip angling down. I'm planning on getting the Xforce axle back so it is just a temp fix. If you have no tip or at least a small tip on the exhaust end it should fit fine, without modifying. Mine is 3.5'' so it was touching the bumper pretty easily.

Yea I got the lip painted and fitted at DT panels in Springvale for $400

User avatar
ninja_ng
Lancer Learner
Lancer Learner
Posts: 9
Joined: Thu Mar 11, 2010 9:23 am
Location: Melbourne, Australia

Postby ninja_ng » Wed Sep 26, 2012 12:08 pm

I got the same rear lip but from elsewhere - turned out pretty good too. I have the two small gaps too - but not noticeable unless you go right up to the car to check it out.

Image


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 52 guests