***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Suspected Paint Chipping/pitting/ or something!

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
cj_sx_2011
Lancer Ralliart
Lancer Ralliart
Posts: 634
Joined: Fri Sep 16, 2011 12:19 am
Location: south australia

Postby cj_sx_2011 » Mon Sep 03, 2012 6:40 pm

hey, yes i got a few chips on my side skirts near the back wheel and a couple on my door, the paint work on our cars is shit and thin

User avatar
Tac89
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 394
Joined: Mon Feb 28, 2011 6:46 pm
Location: Adelaide

Postby Tac89 » Mon Sep 03, 2012 7:01 pm

Yea I have them on mine too. It's a common problem I think.

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Mon Sep 03, 2012 8:26 pm

Mines black. I thought they were all black...

User avatar
Seffy
Lancer Legend
Lancer Legend
Posts: 1296
Joined: Tue Aug 14, 2012 12:23 am
Location: Sydney, Australia

Postby Seffy » Mon Sep 03, 2012 8:37 pm

I have this too! And mine's white!
My car's getting a few paint problems; at the moment it's nothing so bad, but by next year I'm probably going to get a re-paint..
Crayon Pop "straight-five engine" dance ftw.

Image

User avatar
cj_sx_2011
Lancer Ralliart
Lancer Ralliart
Posts: 634
Joined: Fri Sep 16, 2011 12:19 am
Location: south australia

Postby cj_sx_2011 » Mon Sep 03, 2012 8:47 pm

mine is white under the blue :( so frigen noticeable

User avatar
Seffy
Lancer Legend
Lancer Legend
Posts: 1296
Joined: Tue Aug 14, 2012 12:23 am
Location: Sydney, Australia

Postby Seffy » Mon Sep 03, 2012 9:07 pm

When mine chips its like a greyish colour. :/
Crayon Pop "straight-five engine" dance ftw.



Image

User avatar
cj_sx_2011
Lancer Ralliart
Lancer Ralliart
Posts: 634
Joined: Fri Sep 16, 2011 12:19 am
Location: south australia

Postby cj_sx_2011 » Mon Sep 03, 2012 9:32 pm

different colour base cote is weird

User avatar
Leez
Lancer MASTER
Lancer MASTER
Posts: 2061
Joined: Tue Oct 27, 2009 9:54 pm
Location: Melbourne, VIC

Postby Leez » Tue Sep 04, 2012 12:24 am

My undercoat is a greyish colour!

User avatar
Kal777
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 404
Joined: Mon May 21, 2012 9:48 pm
Location: Adelaide

Postby Kal777 » Tue Sep 04, 2012 10:59 am

anyone had any problems with the paint pulling up off the panel when it gets chipped? ive got a few spots were it has bottomed out on the front bumper lip and the paint as slowly pulled away, almost as though the bumper was not prepped properly before being sprayed.

User avatar
empror
Lancer VR/GT
Lancer VR/GT
Posts: 201
Joined: Wed Feb 15, 2012 10:35 am
Location: Kellyville, Australia

Postby empror » Tue Sep 04, 2012 11:04 am

yeah i got a tiny chip on the rear bumper that has turned into a monster about an inch long. pieces pulled off when i washed my car (it was when i was first wetting the car, before i even touched with a sponge)...

User avatar
Tac89
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 394
Joined: Mon Feb 28, 2011 6:46 pm
Location: Adelaide

Postby Tac89 » Tue Sep 04, 2012 11:16 am

Yea mines the as seffys. I have have a spot on the drivers side near the rear pillar where its starting to chip.

User avatar
Seffy
Lancer Legend
Lancer Legend
Posts: 1296
Joined: Tue Aug 14, 2012 12:23 am
Location: Sydney, Australia

Postby Seffy » Tue Sep 04, 2012 12:39 pm

We're all gonna need a re-paint in the future. D:
How much would it cost though..
Crayon Pop "straight-five engine" dance ftw.



Image

User avatar
Kal777
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 404
Joined: Mon May 21, 2012 9:48 pm
Location: Adelaide

Postby Kal777 » Tue Sep 04, 2012 6:02 pm

ive stuck carbon vinyl on the lower part of the front bumper, and on the rear end of the side skirts just to try and stop it from happening. BTW Tyron, that is nothing, ive got chips down to the bare metal. i did however get some touch up paint and can hardly notice.

btw, if anyone wants to know were to get the best touch up paint in adelaide, the Auto Pro on corner of Montague and Kelly Road in Clover Crest is awesome, used them to paint my spoiler too, its damn close to perfect even when dried.
Image
Injen Cold Air Intake/K&N Invert Pod/BC BR Coilovers/Whiteline Strut Brace/DrIft Blade seats/Penrite HPR5/Penrite ProGear/PBR Gold Dot


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 45 guests