***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Front bumper steel mesh

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
manni
Lancer ES/EX
Lancer ES/EX
Posts: 191
Joined: Wed May 02, 2012 11:06 pm
Location: Brisbane

Front bumper steel mesh

Postby manni » Thu Aug 09, 2012 10:15 am

Hey guys I've been looking at filling a vent in my add on on the front of my car with a black steel mesh but the ones I have found have the spacing too far apart and u can see straight through. Anyone know where I might be able to find some??? And yes I've tried super cheap, repco and autobarn :)
Wishes He Had An EVO

Check out My Garage!

http://clubcj.net/garage.php?mode=view_vehicle&CID=977

User avatar
manni
Lancer ES/EX
Lancer ES/EX
Posts: 191
Joined: Wed May 02, 2012 11:06 pm
Location: Brisbane

Postby manni » Fri Aug 10, 2012 4:22 pm

*bump*
Wishes He Had An EVO



Check out My Garage!



http://clubcj.net/garage.php?mode=view_vehicle&CID=977

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Fri Aug 10, 2012 4:30 pm

bunnings?
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
manni
Lancer ES/EX
Lancer ES/EX
Posts: 191
Joined: Wed May 02, 2012 11:06 pm
Location: Brisbane

Postby manni » Fri Aug 10, 2012 6:45 pm

Yeah na they had crap the most they had was crimsafe
Wishes He Had An EVO



Check out My Garage!



http://clubcj.net/garage.php?mode=view_vehicle&CID=977

User avatar
longa
Lancer Newbie
Lancer Newbie
Posts: 84
Joined: Fri Jun 08, 2012 1:20 am
Location: sydney

Postby longa » Fri Aug 10, 2012 6:53 pm

ebay?

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Fri Aug 10, 2012 7:05 pm

What kinda of mesh?
Really depends how small the holes are and how close together they are.
you can get the welded mesh - which is what you saw at supercheapauto
You can get woven mesh, which like fabric is long bits of steel wire, woven between the horizontal and vertical lines and then there is the perforated stuff which is just a sheet of metal with holes punched through it.

What vent are you wanting to cover up? the fog lights or?

Sorry to sound like an ass, but have you tried Google? Plenty of options there if you're willing to go through it all.

Try this for a start. Maybe gives you ideas on what's available and what you might be after? http://www.locker.com.au/general-indust ... anded.html - they have offices in BNE so maybe they can point you in the right direction. But go through google, lots there...
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
manni
Lancer ES/EX
Lancer ES/EX
Posts: 191
Joined: Wed May 02, 2012 11:06 pm
Location: Brisbane

Postby manni » Fri Aug 10, 2012 8:34 pm

Thanks Pete big help :) was just wandering where some good stuff maybe someone else has used. It's for the holes (vents) in the Evo front add on bumper. I'll have a look around :)

Cheers :)
Wishes He Had An EVO



Check out My Garage!



http://clubcj.net/garage.php?mode=view_vehicle&CID=977

User avatar
BRE88N
Lancer ES/EX
Lancer ES/EX
Posts: 180
Joined: Mon Aug 08, 2011 9:12 pm
Location: nsw sydney

Postby BRE88N » Fri Aug 10, 2012 11:53 pm

good luck mate

User avatar
bobcrusader
Lancer VR/GT
Lancer VR/GT
Posts: 273
Joined: Thu Nov 19, 2009 10:16 pm
Location: Melbourne, Australia

Postby bobcrusader » Sat Aug 11, 2012 1:28 pm

Did you see the autobahn stuff I used?
http://clubcj.net/viewtopic.php?t=4393
- 2009 Lancer Ralliart
- Boostpill + Tune
- Upgraded intercooler + pipes
- Turbo XS Catback
- Drift BoV
- Blitz Air Filter

User avatar
manni
Lancer ES/EX
Lancer ES/EX
Posts: 191
Joined: Wed May 02, 2012 11:06 pm
Location: Brisbane

Postby manni » Sat Aug 11, 2012 5:30 pm

bobcrusader wrote:Did you see the autobahn stuff I used? http://clubcj.net/viewtopic.php?t=4393


Actually the autobarn stuff doesn't look to bad on, just looks a bit funny on the shelf. Think I might just do that !! Thanks rob! :)
Wishes He Had An EVO



Check out My Garage!



http://clubcj.net/garage.php?mode=view_vehicle&CID=977


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 37 guests