firstly you take the lining off on the inside of the boot by uncliping those little clips out with a flathead, then unplug the center back light. i then closed the boot, rule a line extending out ofeach of the points to give you a pre ruled template for your illuminated emblem to go on straight and in the middle of the boot. then put a blowdryer over the symbal for like 20 seconds but keep an eye on it, you dont wanna over heat it cuz then the symbal will crinkle a little. But just put enough on it to loosen the glue, then get some fishing line and run it behind it, remember you may have to put this emblem back on one day so keep it, and take good care of it when taking it off. pack it away and yeah, then i cleaned it up got the glue off the boot then drilled the hole in the boot were the wires come out of the back of the new emblem, prolly a 2mm hole just for the 2 wires to go through, try make sure you drill the hole were the old emblem was because if you ever go put it back on you don't want a hole to the side of the stock emblem. then took the backing tape off lined it up with the lines i drew before and stuck it on, opened up the boot and looped the wires over each of the terminals of the plug from the center light. then plugged it back in carefully, had my friend in the front seat keeping the brakes on so i knew it was all working good, Took a couple of tries to get it right, once it's in bobs your uncle, your done. just put the lining back on and clip it all back in.
unfortunately i dont have pictures of the install itself. but the write up shouldn't leave you with any question's. it's all pretty straight forward, litterally took me like 10 minutes.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Illuminated Emblem LED rear
Moderators: Moderators, Senior Moderators
- Xxmattxx100
- Lancer Newbie
- Posts: 28
- Joined: Sat Mar 31, 2012 10:17 am
- Location: Caboolture, Queensland
- Xxmattxx100
- Lancer Newbie
- Posts: 28
- Joined: Sat Mar 31, 2012 10:17 am
- Location: Caboolture, Queensland
- Xxmattxx100
- Lancer Newbie
- Posts: 28
- Joined: Sat Mar 31, 2012 10:17 am
- Location: Caboolture, Queensland
- zedd82
- Lancer Evolution
- Posts: 892
- Joined: Tue May 12, 2009 11:13 am
- Location: Brisbane, QLD, Australia
I bought it from another member Meaty.
This one is similar to mine http://www.aliexpress.com/store/product/option-one-car-logo-light-for-Mitsubishi-Lancer-Lioncei-car-badge-lightings-auto-led-light-auto/107398_463017917.html
They also have one with multiple colours http://www.aliexpress.com/product-fm/542281068-option-two-car-logo-light-for-Mitsubishi-Lancer-Lioncei-car-badge-lightings-auto-led-light-auto-wholesalers.html
It is just spliced into the parker light wiring so it comes on with the head lights. There is a basic how to in pictures on their page for the rear one.
This one is similar to mine http://www.aliexpress.com/store/product/option-one-car-logo-light-for-Mitsubishi-Lancer-Lioncei-car-badge-lightings-auto-led-light-auto/107398_463017917.html
They also have one with multiple colours http://www.aliexpress.com/product-fm/542281068-option-two-car-logo-light-for-Mitsubishi-Lancer-Lioncei-car-badge-lightings-auto-led-light-auto-wholesalers.html
It is just spliced into the parker light wiring so it comes on with the head lights. There is a basic how to in pictures on their page for the rear one.
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h
- The X
- INACTIVE Member Account
- Posts: 6769
- Joined: Mon Aug 31, 2009 10:41 am
- Location: Pyrmonia! Inner Sydney.
- Contact:
Just a word of warning "disabling" the third brake light will be throwing your vehicle compliance out the window and may make you defectable by a keen eyed cop.... and if you got rear ended a keen insurance assessor would wash their hands of the claim and blame it on your car technically being road worthy.CJVRX wrote:Yeah looks good would prob be better if u disabled the middle break light, the diamond would stand out more
That being said we all make decisions and choices on how e modify our cars, so you are best to make an educated choice....
Oh and the mod looks great though.
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
More pix @ http://clubcj.net/viewtopic.php?t=8779
- Xxmattxx100
- Lancer Newbie
- Posts: 28
- Joined: Sat Mar 31, 2012 10:17 am
- Location: Caboolture, Queensland
- Xxmattxx100
- Lancer Newbie
- Posts: 28
- Joined: Sat Mar 31, 2012 10:17 am
- Location: Caboolture, Queensland
-
- Lancer Learner
- Posts: 1
- Joined: Thu Jan 19, 2017 3:06 pm
Re:
malkinfalcon wrote:Looks GREAT but really wana c a day pic! They sell 'em all over e-bay..I adjusted my white one and placed it behind the emblem, shit quality pic -
What did you connect it to? To power it I mean.
- Ronan.Butler11
- Lancer VRX/GTS
- Posts: 356
- Joined: Sun Apr 17, 2016 9:38 pm
- Location: Sydney, NSW, AUS
Re: Re:
\LovethatCar4 wrote:malkinfalcon wrote:Looks GREAT but really wana c a day pic! They sell 'em all over e-bay..I adjusted my white one and placed it behind the emblem, shit quality pic -
What did you connect it to? To power it I mean.
Would imagine tap into your parkers would be easier, then when they come on so does the emblem
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*
- Lancer1993
- Genius
- Posts: 5342
- Joined: Sat Dec 06, 2014 12:46 pm
- Location: Caloundra
- Contact:
Re:
zedd82 wrote:Here is my front one
Nice use of light for the photo. I really need to find a nicely lit and diserted carpark to do some shots like this.
Not sure about the illuminated emblems though, but each to their own. I'm sure there are some that don't like the yellow bits on my black VRX.
Who is online
Users browsing this forum: No registered users and 52 guests