***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Best way to wash car?

Servicing, Oil Changes, Fluids & Much More.

Moderators: Moderators, Senior Moderators

User avatar
RMN116
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 355
Joined: Sun Jun 03, 2012 2:29 pm
Location: SYDNEY, AUSTRALIA

Postby RMN116 » Tue Jul 31, 2012 6:32 pm

I use Auto Glym car wash, Meguiars wool mitt and Auto Glym Synthetic Chamois. I wash my car as much as possible under a shady area and one panel at a time. Everynow and then Id wax it if I can be bothered.
Image

GST Stock RA + Boost Pill Basemap v3.0
AMS Boost Pill
Evo XIII Metal ByPass Valve
Simota High-Flow Drop-In Air Filter

User avatar
Craker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 360
Joined: Sat Jun 02, 2012 9:56 pm
Location: Kings park sydney nsw

Postby Craker » Tue Jul 31, 2012 7:52 pm

I got the Meguiars new car kit. Has the MIT ultimate wash ultimate wax, which talking to the guys at meguiars at motorex is there best wax and can be used in sunlight, microfiber cloths an tyre gel which lasts longer than spray. I find these products seem to work great. Have taken my car to car wash cafe at baulkham hills and other places and they just don't do as good a job as I do.
2011 lancer ralliart sportback
192kw + 370nm at wheels virtual dyno by boostin juice tuning
Hyperflow intercooler, gfb respons bov , gs 3 port
ultimate racing uicp and licp, hyperflow cat back + hi flow cat
MCA blue coilovers and whiteline sway bars
T3 rotors and ds performance pads
enkei sc 22 wheels

User avatar
joechelle98
Lancer Newbie
Lancer Newbie
Posts: 69
Joined: Tue Jun 12, 2012 11:36 pm
Location: Toowoomba, QLD

Postby joechelle98 » Tue Jul 31, 2012 8:18 pm

I usually rinse the car first under low pressure then follow it up with snow foam wash using the foam lance to lift the grime and dirt off the car's body. That is then followed by hand wash using dodo juice wash and wash mitt. Rinsed under low pressure then dried using 2 step micro fibre system. Every 3 months, the car undergoes multi-step waxing process. 1.Clay bar with quick detailer spray. 2. buff 3. sealant 4. buff 5. wax binding solution 6. carnauba...the whole process takes up the whole weekend :)

User avatar
Gleno
Lancer Evolution
Lancer Evolution
Posts: 991
Joined: Sun Sep 05, 2010 12:22 pm
Location: Sydney

Postby Gleno » Tue Jul 31, 2012 9:02 pm

I'm not as fussy in washing the car like unused to be, but i always start from the roof down, of you start from the bottom of the doors up, a lot of the grime is at the bottom part of the car which will transfer onto the sponge/cloth when you wash the rear of the car. I'm fortunate to have a silver color, swirl marks etc are rarely seen :)

User avatar
Ledspy
Lancer Newbie
Lancer Newbie
Posts: 38
Joined: Thu Jul 12, 2012 10:58 am
Location: Melbourne
Contact:

Postby Ledspy » Tue Jul 31, 2012 9:04 pm

I usually go to the self service car wash thing where you put money in the slot and you get one minute to wash your car.
Im wondering if the high pressure wax thing actually works? I mean the next option after that is the high pressure rinse.

after watching youtube vids im never going to the self service wash again lol. hand wash all the way yo.

User avatar
Omicronus
Lancer Newbie
Lancer Newbie
Posts: 75
Joined: Mon Aug 06, 2012 2:10 am
Location: Canberra, Australia

Postby Omicronus » Tue Aug 07, 2012 3:00 pm

Does anyone have any specific products they use? I've been trying to look for that "kitten in the red bottle " that Sir Lancer-lot uses.

User avatar
Sir Lancer-lot
Lancer Newbie
Lancer Newbie
Posts: 90
Joined: Tue Jul 10, 2012 6:22 pm
Location: Victoria

Postby Sir Lancer-lot » Tue Aug 07, 2012 4:23 pm

@ Matt Should be available at Repco if you have them in Canberra...
2011 VRX Sportback - 2.4L - CVT - MMCS


Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 4 guests