***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Thinking of buying VR-X in VIC
Moderator: Senior Moderators
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Further to my advice though:
The one thing you have to be aware of is the higher running cost
1. You'll need to run Premium Petrol (95 is the lowest grade it'll take)
2. You get less out of a full tank by well over 100km
3. Servicing if you don't have capped price is like a robbery.
But as Gramps put it, if you can stretch out to it, do it.
The one thing you have to be aware of is the higher running cost
1. You'll need to run Premium Petrol (95 is the lowest grade it'll take)
2. You get less out of a full tank by well over 100km
3. Servicing if you don't have capped price is like a robbery.
But as Gramps put it, if you can stretch out to it, do it.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- Sir Lancer-lot
- Lancer Newbie
- Posts: 90
- Joined: Tue Jul 10, 2012 6:22 pm
- Location: Victoria
I went to visit mitsubishi yesterday. Checked out VRX auto, SX and the ASX activ. I guess it all comes down to how much Im willing to spend. I didnt want to touch the RA because I know that I will end up spending more than I have already budgeted for. The VRX doesnt have the performance that I would like, but you get what you pay for.
I also went to see a 2008 2.4l manual privately, however im highly precaucious about private sale.
Does anyone have a obd2 reader i can borrow?
or
know where i can buy one locally.
I also went to see a 2008 2.4l manual privately, however im highly precaucious about private sale.
Does anyone have a obd2 reader i can borrow?
or
know where i can buy one locally.
- bunnishiwa
- Lancer Legend
- Posts: 1284
- Joined: Thu Dec 24, 2009 4:22 pm
- Location: Rye, Melbourne
Best place to buy is Tactrix.com in the states. Over members here have mentioned the quick delivery.
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Ledspy wrote:I went to visit mitsubishi yesterday. Checked out VRX auto, SX and the ASX activ. I guess it all comes down to how much Im willing to spend. I didnt want to touch the RA because I know that I will end up spending more than I have already budgeted for. The VRX doesnt have the performance that I would like, but you get what you pay for. I also went to see a 2008 2.4l manual privately, however im highly precaucious about private sale. Does anyone have a obd2 reader i can borrow? or know where i can buy one locally.
1. You don't want to spend more than you've budgeted + VRX doesn't have the performance you're looking for
Performance not good enough, look Elsewhere. Don't buy a VRX nor a Lancer.
2. 2008 2.4L Manual
You could take me along. I've seen so many of these cars, I can tell you if its safe or not.
3. Why do you need an OBD2 reader?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Ledspy wrote:Yeah ok guys so I finally bought a second hand Ralliart
Congrats.
If you have a Facebook account, do join us on FB. We meet randomly from time to time. Come along and show us the ride!
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Thinking of Buying a Lancer?”
Who is online
Users browsing this forum: Bing [Bot] and 13 guests