***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

headlamp protectors?

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
hobba
Lancer ES/EX
Lancer ES/EX
Posts: 123
Joined: Sun Jul 10, 2011 5:59 pm
Location: Geelong

headlamp protectors?

Postby hobba » Wed Oct 05, 2011 8:41 pm

Firstly, worth it or not?
My dealers price is about 90 bucks not installed but saw that through here they are only 55..

Secondly, are the easy or hard to self install.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Oct 05, 2011 8:51 pm

Worth it? Only you can tell that.
Depends on how rural it is where you live?
How much abuse do you think your headlamps will take?
How long are you keeping the car?
How new do you need to keep your headlamps?

Yes many things at the dealers are overpriced.

Again this depends on you.
It's just a couple of clips.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Wed Oct 05, 2011 8:56 pm

I've done thousands of km's through hilly/country areas and your headlights are pretty tough, the paint on your front bumper/front of your bonnet will have hundreds of chips before you notice many on your lights
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
Gleno
Lancer Evolution
Lancer Evolution
Posts: 991
Joined: Sun Sep 05, 2010 12:22 pm
Location: Sydney

Postby Gleno » Wed Oct 05, 2011 9:02 pm

I agree Graham the headlights themselves are pretty tough as it is without the protectors and i have driven to Qld on several occasions now with no noticeable chips or scratches on the headlights themselves.

User avatar
ThatCJLancer
Lancer Newbie
Lancer Newbie
Posts: 32
Joined: Thu Aug 11, 2011 2:21 am
Location: Shepparton, Australia

Postby ThatCJLancer » Wed Oct 05, 2011 10:15 pm

personally i think they're a waste of money.

we had them fitted to dads/my old vx commadore. But after a while they looked like rubbish, so i took them off back in 07. When we got rid of it a couple months ago the lights looked fine, no straches, chips or cracks. The lights looked brand new after 5yrs country driving.

This is coming from someone who had to replace the windscreen 3 times due to stone strikes.

User avatar
dubdocker
Lancer ES/EX
Lancer ES/EX
Posts: 178
Joined: Fri Jan 14, 2011 9:12 am
Location: Geelong, Victoria

Postby dubdocker » Wed Oct 05, 2011 11:10 pm

I've had to replace protectors recently after they were smashed by a rock thrown up on the Geelong Ring Road.

The picture makes it look a lot better than it was.
Image

I'd much rather replace a plastic cover than a HID projector assembly.
Image

ckk125
Lancer Learner
Lancer Learner
Posts: 10
Joined: Sat Oct 29, 2011 3:27 pm
Location: ipoh

Postby ckk125 » Sat Nov 12, 2011 9:14 pm

Greetings, sorry to bring this up, how to install it?

Thanks

User avatar
dannyboi
Lancer Evolution
Lancer Evolution
Posts: 818
Joined: Sat Jun 26, 2010 8:53 pm
Location: Sydney, Australia

Postby dannyboi » Sat Nov 12, 2011 9:57 pm

They're just a couple of clips that you slide under your headlights. The protectors should come with instructions.

I don't know if it's worthwhile, but I prefer to have them anyway.

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Sat Nov 12, 2011 10:11 pm

I did a lot of freeway kms in my lancer. By the time I got rid of it both headlights were very pitted, along with the 3rd windscreen that was in it :P

Might I suggest you look into some 3m clear film? Protects as good if not better than the OEM headlight protectors while being virtually invisible.

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Sat Nov 12, 2011 10:14 pm

You could also look at lamin-x.com for their headlamp films. They make them pre-cut. The clear film is thicker than the tinted films, because the clear film is for those that want protection....
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
debonaire
Lancer Ralliart
Lancer Ralliart
Posts: 504
Joined: Tue Jun 07, 2011 9:55 am
Location: Brisbane

Postby debonaire » Sun Nov 13, 2011 7:19 pm

Personally, I think they're a waste of money, and when I sold cars I told customers the same thing.

Modern headlights are a very strong polycarbonate, and they really shouldn't break from any road debris.

In my opinion all they do is trap stuff between the headlight and the part, making it hard to clean and putting a film of dust in front of your lights. Fortunately, the Lancer parts are at least a very tidy unit and barely noticable from the bare headlight.

User avatar
Fawkes
Lancer ES/EX
Lancer ES/EX
Posts: 171
Joined: Sat Feb 25, 2012 10:04 am
Location: Brisbane, Australia

Postby Fawkes » Mon Jul 09, 2012 12:18 pm

I say worth it, My old 2Dr MR lancer had them. the left hand one ended up having a massive crack in it. Not sure if that stone would have smashed the lens if it hit it. but better a bit of plastic then a headlight (yes i know they are probably also plastic)


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 59 guests