***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
What did you do on your car today?
Moderators: Moderators, Senior Moderators
Glenn wrote:haha i was surprised how little boost it took. It popped off on the UCIP side of the turbo inlet which uses a reducer that doesnt have much extra silicon so shes gotta be hella tight. t clamps on their way!
Ha, I did this in my Skyline once, on a busy road in Toowong.
I had half-arsed some pipes back together because I was in the middle of some work, and thought I'd just drive around very carefully for a couple of days rather than tighten all the clamps that were super hard to get to...
It worked well until a car pulled out in front of me unexpectedly and I had to lift off the gas quickly. As soon as the throttle body snapped closed, the pressure found the path of least resistance and there was a Whhuzzzz! from the front of the car. Luckily I was in the left lane and there was somewhere to pull over, just happened to be outside a Kmart Tyre & Auto so I borrowed a trolley jack and manhandled it back together in the gutter.
Put in....PHILIPS T10 W5W 6000K (XENON HID WHITE) ULTINON LED PARKERS
http://www.ebay.com.au/itm/PHILIPS-T10- ... 708wt_1024 AU $54.99 + FREE Australia Express Post
Very happy with seller & service
Drivers Side parker is Cool White Philips..... Passenger Side parker is LED
http://www.ebay.com.au/itm/PHILIPS-T10- ... 708wt_1024 AU $54.99 + FREE Australia Express Post
Very happy with seller & service
Drivers Side parker is Cool White Philips..... Passenger Side parker is LED
Last edited by JoeJoe on Fri Jul 06, 2012 4:09 pm, edited 1 time in total.
follow the white rabbit to link...
VRX 18" GunMetal Mag Wheels (TBA)
Whiteline 24mm Rear Sway Bar & Front Strut Brace
Reverse camera & Painted red calipers (+5Kw)
Carbon fibre Dash, Trim & B pillars Wrapped
LED Parkers & interior lights
Bonnet Gas Struts
Greddy Exhaust (coming soon)
BC Racing Coilovers (coming soon)
Whiteline 24mm Rear Sway Bar & Front Strut Brace
Reverse camera & Painted red calipers (+5Kw)
Carbon fibre Dash, Trim & B pillars Wrapped
LED Parkers & interior lights
Bonnet Gas Struts
Greddy Exhaust (coming soon)
BC Racing Coilovers (coming soon)
BR14AN wrote:[quote:7b3959df68=empror]Rpw 4-2-1 headers and 4300k HIDs, thanks to br14an. ULtra racing Strut brace (previously owned by kyrus) going in tonight, again thanks to br14an and his torque gun.[/quote:7b3959df68] <3 now you get to help with my coilovers haha
means you'll probably be helping with mine in a month or two
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
aspir3 wrote:I got my car back from the spray painters. [img:e4da61daec]http://www.clubcj.net/img/images/20120706171927_bonnet.jpg[/img:e4da61daec]
What's wrong with that picture?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Troy wrote:I got my car back from the spray painters.
Is that a Turbo Aspire .....
Looks Good Troy .... Finally.
Ofey asked & wrote:What's wrong with that picture?
Yep. agreed ... the pic looks jaggered along the edges, hard to see close detail. Maybe you should & post another better pic ....!
Sam .....
Merlinised MIVEC AspiRe 2.4L
Merlin Inspired Variable Engine Control
Last edited by SAM-24A on Fri Jul 06, 2012 5:35 pm, edited 1 time in total.
Sam .....
Merlinised MIVEC - AspiRe 2.4L
Merlinised MIVEC - AspiRe 2.4L
Who is online
Users browsing this forum: No registered users and 115 guests