***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
What did you do on your car today?
Moderators: Moderators, Senior Moderators
Glenn wrote:haha i was surprised how little boost it took. It popped off on the UCIP side of the turbo inlet which uses a reducer that doesnt have much extra silicon so shes gotta be hella tight. t clamps on their way!
Ha, I did this in my Skyline once, on a busy road in Toowong.
I had half-arsed some pipes back together because I was in the middle of some work, and thought I'd just drive around very carefully for a couple of days rather than tighten all the clamps that were super hard to get to...
It worked well until a car pulled out in front of me unexpectedly and I had to lift off the gas quickly. As soon as the throttle body snapped closed, the pressure found the path of least resistance and there was a Whhuzzzz! from the front of the car. Luckily I was in the left lane and there was somewhere to pull over, just happened to be outside a Kmart Tyre & Auto so I borrowed a trolley jack and manhandled it back together in the gutter.

Put in....PHILIPS T10 W5W 6000K (XENON HID WHITE) ULTINON LED PARKERS
http://www.ebay.com.au/itm/PHILIPS-T10- ... 708wt_1024 AU $54.99 + FREE Australia Express Post
Very happy with seller & service
Drivers Side parker is Cool White Philips..... Passenger Side parker is LED
http://www.ebay.com.au/itm/PHILIPS-T10- ... 708wt_1024 AU $54.99 + FREE Australia Express Post
Very happy with seller & service





Drivers Side parker is Cool White Philips..... Passenger Side parker is LED
Last edited by JoeJoe on Fri Jul 06, 2012 4:09 pm, edited 1 time in total.
follow the white rabbit to link... 

VRX 18" GunMetal Mag Wheels (TBA)
Whiteline 24mm Rear Sway Bar & Front Strut Brace
Reverse camera & Painted red calipers (+5Kw)
Carbon fibre Dash, Trim & B pillars Wrapped
LED Parkers & interior lights
Bonnet Gas Struts
Greddy Exhaust (coming soon)
BC Racing Coilovers (coming soon)
Whiteline 24mm Rear Sway Bar & Front Strut Brace
Reverse camera & Painted red calipers (+5Kw)
Carbon fibre Dash, Trim & B pillars Wrapped
LED Parkers & interior lights
Bonnet Gas Struts
Greddy Exhaust (coming soon)
BC Racing Coilovers (coming soon)
BR14AN wrote:[quote:7b3959df68=empror]Rpw 4-2-1 headers and 4300k HIDs, thanks to br14an. ULtra racing Strut brace (previously owned by kyrus) going in tonight, again thanks to br14an and his torque gun.[/quote:7b3959df68] <3 now you get to help with my coilovers haha
means you'll probably be helping with mine in a month or two

- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
aspir3 wrote:I got my car back from the spray painters. [img:e4da61daec]http://www.clubcj.net/img/images/20120706171927_bonnet.jpg[/img:e4da61daec]
What's wrong with that picture?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Troy wrote:I got my car back from the spray painters.
Is that a Turbo Aspire .....

Looks Good Troy .... Finally.
Ofey asked & wrote:What's wrong with that picture?
Yep. agreed ... the pic looks jaggered along the edges, hard to see close detail. Maybe you should

Sam .....

Merlinised MIVEC AspiRe 2.4L
Merlin Inspired Variable Engine Control
Last edited by SAM-24A on Fri Jul 06, 2012 5:35 pm, edited 1 time in total.
Sam ..... 
Merlinised MIVEC - AspiRe 2.4L

Merlinised MIVEC - AspiRe 2.4L
Who is online
Users browsing this forum: No registered users and 10 guests