***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

What did you do on your car today?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

User avatar
chunky9
Lancer Evolution
Lancer Evolution
Posts: 821
Joined: Sun May 27, 2012 10:21 pm
Location: Sydney, New South Wales

Postby chunky9 » Sun Jun 17, 2012 8:27 pm

^nice job
a simple black bar covering the plate would have worked better
can still make out the plate haha :P

User avatar
RMN116
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 355
Joined: Sun Jun 03, 2012 2:29 pm
Location: SYDNEY, AUSTRALIA

Postby RMN116 » Sun Jun 17, 2012 10:15 pm

Hey Luke what did you do to your old wheels? Those looks awesome.
Image

GST Stock RA + Boost Pill Basemap v3.0
AMS Boost Pill
Evo XIII Metal ByPass Valve
Simota High-Flow Drop-In Air Filter

User avatar
Big_Lucas
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 335
Joined: Mon Feb 01, 2010 9:11 pm
Location: Australia

Postby Big_Lucas » Mon Jun 18, 2012 8:30 am

Putting them on my falcon

User avatar
longa
Lancer Newbie
Lancer Newbie
Posts: 84
Joined: Fri Jun 08, 2012 1:20 am
Location: sydney

Postby longa » Mon Jun 18, 2012 5:55 pm

ImageImage
got my roof wrapped in vinyl and the front done again, was done yesterday but only got the chance to upload just now :)

User avatar
Zaki
Lancer VR/GT
Lancer VR/GT
Posts: 205
Joined: Fri Nov 25, 2011 12:22 am
Location: Australia

Postby Zaki » Tue Jun 19, 2012 11:31 pm

Image
finally did my aftermarket install looks good and sounds great and also carbonised the dash lol better picks up soon

User avatar
BZC-45S
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 388
Joined: Mon Feb 20, 2012 10:23 pm
Location: Sydney, AU

Postby BZC-45S » Wed Jun 20, 2012 10:35 pm

I filled up! Averaged 12.8 l/100km over 334kms since I flashed my ECU with GST basemap.

User avatar
RawrlliArt
Lancer Newbie
Lancer Newbie
Posts: 88
Joined: Tue Jun 12, 2012 5:14 pm
Location: Perth, WA

Postby RawrlliArt » Thu Jun 21, 2012 2:09 am

I hit the rev limiter in 1st because I forgot I had it in manual mode rofl.

I then apologised to my poor baby :(
Image
Image

User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Thu Jun 21, 2012 5:46 am

BZC-45S wrote:I filled up! Averaged 12.8 l/100km over 334kms since I flashed my ECU with GST basemap.


OMG - warp speed everywhere... I actually get slightly better fuel economy with the GST flash, averaging (so far) down from 10.1 l/100 to 9.9 l/100

Awesome free tune though :D How's the logging going?
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot :)
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar



Noli Timere Messorem

User avatar
mikedeu
Lancer Newbie
Lancer Newbie
Posts: 22
Joined: Mon May 28, 2012 3:30 pm
Location: Melbourne, Australia

Postby mikedeu » Fri Jun 22, 2012 12:02 am

installed paddle shifter
Image

and muffler
Image

User avatar
eshanes
Lancer Newbie
Lancer Newbie
Posts: 98
Joined: Mon Oct 03, 2011 12:09 am
Location: Concord, NSW

Postby eshanes » Fri Jun 22, 2012 2:13 pm

Added matte black door handle covers.
Couldn't find any that came in black so ended up buying chrome ones and painting them.

Image

User avatar
ijustatecurry
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 395
Joined: Thu Jan 20, 2011 5:00 pm
Location: Glen Waverley, VIC Australia

Postby ijustatecurry » Fri Jun 22, 2012 2:40 pm

looks good Shane, nice red/black colour scheme
All bleeding stops eventually!

User avatar
JustSage
Lancer Newbie
Lancer Newbie
Posts: 70
Joined: Sun Apr 29, 2012 11:32 am
Location: South West Sydney, Australia

Postby JustSage » Fri Jun 22, 2012 3:28 pm

What I did was pull out the rectangular compartment thing in between the gear knob and handbrake, and I noticed 2 plugs I the bottom doing nothing, out of curiosity what can these be used for ? :L
2010 Lancer SX

User avatar
Fawkes
Lancer ES/EX
Lancer ES/EX
Posts: 171
Joined: Sat Feb 25, 2012 10:04 am
Location: Brisbane, Australia

Postby Fawkes » Fri Jun 22, 2012 5:19 pm

Replaced the headlight bulbs with 4000k ones, installed a cf vortex generator.

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Fri Jun 22, 2012 5:22 pm

JustSage wrote:What I did was pull out the rectangular compartment thing in between the gear knob and handbrake, and I noticed 2 plugs I the bottom doing nothing, out of curiosity what can these be used for ? :L


One is for the active lights on models with HID's.

Not sure what the other one you are referring too is. It could be the cigarette lighter.

Basically most models have the same wiring looms but only use what they require.


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 147 guests