He works in car sales (well known fact).
Not the first time he's offered to help someone with a new car.
Coincidentally all 3 times, the person buying was in Brisbane.
If he really was helping, he would offer to help ALL new buyers of cars OR perhaps spell out what tactics car sellers use. Much like what @DEbonaire did which was very helpful. He provided a full written up guide.
I suspect you're over-reacting.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
what you reckon i should offer?
Moderator: Senior Moderators
- RawrlliArt
- Lancer Newbie
- Posts: 88
- Joined: Tue Jun 12, 2012 5:14 pm
- Location: Perth, WA
RyanMK wrote:[quote:716218650f=el3ment]Appreciate the feedback guys. Ill see how it goes on Saturday Think I might offer $22k with foggies, floor mats, fuel and proper spare wheel kit. One question, what type of wheel comes with the spare wheel kit? The same wheel as what the came sits on? Or a cheapy steelo?[/quote:716218650f] Steelie.
i got an oem 16" and they let me keep the space saver too
I feel this has gotten out of hand. Jono only provided help and suggested what I should ask for when purchasing the car and what I should add later myself to save on cost.
Anyway, I went to a Dealer yesterday and we ordered our Activ... Will take about a month to come in Can't wait.
Ended up with:
My12 Lancer CVT 2.0
Lightning Blue colour
Floor Mats
Full tank of fuel
Darkest legal tint
Reverse Sensors
SmartKote Nano-Tec Surface coating outside and inside
$25.5k
Will no doubt add foggies myself later, or get them installed by Mitsubishi. Not sure how difficult it is on lancers yet. No doubt would need the different indicator stalk?
Also will get the full size spare wheel kit and add some floor and dash lighting later.
Anyway, will create a new thread for the car in the appropriate section once we have it.
Thanks again to everyone or their feedback. Really appreciate it.
Anyway, I went to a Dealer yesterday and we ordered our Activ... Will take about a month to come in Can't wait.
Ended up with:
My12 Lancer CVT 2.0
Lightning Blue colour
Floor Mats
Full tank of fuel
Darkest legal tint
Reverse Sensors
SmartKote Nano-Tec Surface coating outside and inside
$25.5k
Will no doubt add foggies myself later, or get them installed by Mitsubishi. Not sure how difficult it is on lancers yet. No doubt would need the different indicator stalk?
Also will get the full size spare wheel kit and add some floor and dash lighting later.
Anyway, will create a new thread for the car in the appropriate section once we have it.
Thanks again to everyone or their feedback. Really appreciate it.
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray
- squala
- Post Monster
- Posts: 2869
- Joined: Wed Jun 03, 2009 12:23 am
- Location: Fines City, VIC, Australia
I think it's quite simple. Regular members are only allowed to sell personal stuff here. Those who want to sell for business purposes must apply as a vendor or sponsor, and that includes dealers who advertise vehicles for sale.
///// /////
7 airbags
6-speed SST
5-star safety
4-wheel drive
3-diamond badge
2 overhead cams
1 awesome ride
0 demerit points and gutter rash
7 airbags
6-speed SST
5-star safety
4-wheel drive
3-diamond badge
2 overhead cams
1 awesome ride
0 demerit points and gutter rash
hey thorsten
i remember you originally said you were offered 24.5K initially
i reckon you couldve pushed them further down without the extra addons which could have been done by yourself later
tint: $200
genuine mats from CCJ: ~$90
full tank: ~$70
sesnors: ~$200 - $300 max. not too sure
you couldve still ended up saving some money if you bargained on the price without the extra stuff.
just my 2 cents
i remember you originally said you were offered 24.5K initially
i reckon you couldve pushed them further down without the extra addons which could have been done by yourself later
tint: $200
genuine mats from CCJ: ~$90
full tank: ~$70
sesnors: ~$200 - $300 max. not too sure
you couldve still ended up saving some money if you bargained on the price without the extra stuff.
just my 2 cents
jitesh88 wrote:hey thorsten i remember you originally said you were offered 24.5K initially i reckon you couldve pushed them further down without the extra addons which could have been done by yourself later tint: $200 genuine mats from CCJ: ~$90 full tank: ~$70 sesnors: ~$200 - $300 max. not too sure you couldve still ended up saving some money if you bargained on the price without the extra stuff. just my 2 cents
Hey Jitesh
The SmartKote stuff was the most expensive item which was added, hence the $25.500. The car itself was $23,230 in the end. the rest are all addons..
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray
squala wrote:I think its quite simple. Regular members are only allowed to sell personal stuff here. Those who want to sell for business purposes must apply as a vendor or sponsor, and that includes dealers who advertise vehicles for sale.
I understand that A, and I fully respect rules and regulations on forums and agree with what you said. However Jonno didn't sell me a car. He only helped me with advise and gave me suggestions.
Anyway, lets move on
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray
sleeper wrote:thorsten, do more research on the smartcote protectant. i bought the same option on my new car and really it was a waste of money. polishing with a good wax will give u the same protection at a tenth of the price or less. imo its a con.
The whole point of it is though, its only applied once and never needs re-doing and warranty is for the live of the car... soo.. not quite the same and waxing. Anyway, we will see in 5 years time. lol
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
[quote="el3ment" The whole point of it is though, its only applied once and never needs re-doing and warranty is for the live of the car... soo.. not quite the same and waxing. Anyway, we will see in 5 years time. lol[/quote]
Read the claim terms. Biggest con job ever.
Read the claim terms. Biggest con job ever.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Thinking of Buying a Lancer?”
Who is online
Users browsing this forum: No registered users and 60 guests