***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* Evo Rep Prts CCJ GB SEP'11

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Thu Jun 07, 2012 6:14 pm

Today our new bonnets arrived. Wooden box appears okay.

I am going tomorrow afternoon to look and possible trial fit one.

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Fri Jun 08, 2012 7:36 pm

I opened the 3 bonnets today. 2 were good and 1 was damaged. It was the centre one. It was either damaged before packing or package was unpacked by customs for inspection and then put back in the crate in different positions. I cant see any other explanation why the centre one would be the only one that was damaged.

Here are the pictures of 1 fitted on to my car. Overall is good. The bonnet is a little high against the guard about 300mm from the back of the guard on the drivers side. The centre vent is very poor and will need replacing. I hope to get one from ebay or possible a genuine.

ImageImageImage

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Fri Jun 08, 2012 7:38 pm

Nice

User avatar
RyanMK
Lancer Legend
Lancer Legend
Posts: 1115
Joined: Mon Apr 26, 2010 6:15 pm
Location: Adelaide

Postby RyanMK » Fri Jun 08, 2012 9:08 pm

Question, so how do we decide who takes the 2 good ones? And what happens with the damaged one?
VG/Ultra Racing/Whiteline/Work/Ralliart/Supercircuit/Cosworth/Pioneer/BC/Recaro

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Fri Jun 08, 2012 9:15 pm

aspir3 wrote:I opened the 3 bonnets today. 2 were good and 1 was damaged. It was the centre one. It was either damaged before packing or package was unpacked by customs for inspection and then put back in the crate in different positions.
Good to hear that the shipment finally arrived. Bummer about the damaged bonnet. What damage is there? Usually customs will reseal and plonk a customs "resealed" sticker on the boxes. Was the inner box visibly opened and resealed.

I thought there were 3 members in SA for bonnet replacement, so how you guys going to fairly decide who gets the good ones? Coin toss? Tough decisions ahead....
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Fri Jun 08, 2012 9:17 pm

RyanMK wrote:Question, so how do we decide who takes the 2 good ones? And what happens with the damaged one?

Looks like Troy has already decided where 1 good one goes..... if this is anything to go by http://clubcj.net/viewtopic.php?p=251298#251298 - so I guess it's a 50/50 battle for the other one.
"the quieter you become, the more you are able to hear"

More pix @ http://clubcj.net/viewtopic.php?t=8779

ImageImage

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Fri Jun 08, 2012 9:25 pm

RyanMK wrote:Question, so how do we decide who takes the 2 good ones? And what happens with the damaged one?


Ryan we now have 3 good bonnets and 3 damaged bonnets. Remember we had 1 good bonnet from the original shipment.

All bonnets need a little work but good for their price. Remember I am very picky. You could just paint them but to a trained eye you can see the top surface needs a little filling in the low areas. This is no different then you would get often in factory from OEM parts. I use to work at Hirotec that supply panels to Holdens and bonnets had a very high rework rate. unfortunately they are a very visible part.

The 3 damaged bonnets are by no means really bad. It is not like they look like after an accident. They are repairable but would take more to repair then to replace.

User avatar
RyanMK
Lancer Legend
Lancer Legend
Posts: 1115
Joined: Mon Apr 26, 2010 6:15 pm
Location: Adelaide

Postby RyanMK » Fri Jun 08, 2012 9:29 pm

Oh, I didn't know we had an good one from the original shipment. But still, that leaves the issue of picking a bonnet. I'm sure each bonnet would defer in fitment. Are we just doing this by the luck of the draw? Just curious, that's all.
VG/Ultra Racing/Whiteline/Work/Ralliart/Supercircuit/Cosworth/Pioneer/BC/Recaro

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Fri Jun 08, 2012 9:35 pm

I picked one of the 3 and fitted it to my car. It was the one closest to my car so we test fitted it. All 3 look the same.

I am not going to fit all 3 to my car to see which one fits best.

Trevor came over to my cousins workshop and saw the other bonnets and mine. He can confirm all are the same.

WTR
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Sun Apr 04, 2010 8:16 pm
Location: Hawkesbury, NSW

Postby WTR » Fri Jun 08, 2012 9:39 pm

VRX_Pete wrote:[quote:550edc3d34=RyanMK]Question, so how do we decide who takes the 2 good ones? And what happens with the damaged one?[/quote:550edc3d34] Looks like Troy has already decided where 1 good one goes..... if this is anything to go by http://clubcj.net/viewtopic.php?p=251298#251298 - so I guess its a 50/50 battle for the other one.


Cheap shot ?

User avatar
RyanMK
Lancer Legend
Lancer Legend
Posts: 1115
Joined: Mon Apr 26, 2010 6:15 pm
Location: Adelaide

Postby RyanMK » Fri Jun 08, 2012 9:51 pm

Anyway, all's good on my end. Troy, Trev and me will sort it out among ourselves. :)
VG/Ultra Racing/Whiteline/Work/Ralliart/Supercircuit/Cosworth/Pioneer/BC/Recaro

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jun 08, 2012 9:54 pm

RyanMK wrote:Anyway, alls good on my end. Troy, Trev and me will sort it out among ourselves. :)


I hope this has been resolved satisfactorily.
I don't ever wanna do this again.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
SideWayz
Lancer Newbie
Lancer Newbie
Posts: 46
Joined: Tue Apr 26, 2011 1:50 am
Location: HUNTINGDALE

Postby SideWayz » Mon Jun 25, 2012 9:05 am

Hey Irving,
can you give me a price for the LED tail Lights and Evo X Replica Bodykit.
and those the Evo X Replica Bodykit comes with all the pics that are shown in those small pics?
EVO X <3

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Jun 25, 2012 10:33 am

SideWayz wrote:Hey Irving, can you give me a price for the LED tail Lights and Evo X Replica Bodykit. and those the Evo X Replica Bodykit comes with all the pics that are shown in those small pics?


I don't know if you read through the thread Hasib.

This group buy was completed.
I NEVER want to deal with the sellers we got these parts from EVER AGAIN.

No more LED Tail Lights left.

Try eBay. Prices have now dropped and are very competitive.

Actually come to think of it, this GB has completed.
If we see any money from our insurance claim, I'll keep you guys posted.

VERY BAD GB this. I hope participants don't hold it against me.

GB Closed.
Thread locked.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 23 guests