***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
What did you do on your car today?
Moderators: Moderators, Senior Moderators
VRX_Pete wrote:[quote:5a7a33e581=Leez]Oh yeah, good idea thanks Pete Ill call them tomorrowWhenever I close the door I can still hear glass chips rattling inside the door (this is after fixing btw), is it easy to get inside the door myself to clean it up?[/quote:5a7a33e581] Yes, sorta. The inside plastic door trim clips off, as long as you undo a couple of screws hidden behind the cap where the inside door latch is and arm rest on the door. Once off, the real inside of the door has cut out holes, but they are covered in a transluecent plastic film, youll have to cut that plastic film away to get access to the inside and vacuum the shards of glass.
Sweet thanks I'll get onto it this weekend. The plastic film isn't important is it? Why is it there?
-
scraverX
- Lancer MASTER
- Posts: 1590
- Joined: Fri Oct 30, 2009 8:12 am
- Location: Canberra, Australia
- Contact:
Got a wheel alignment done, now have to steer right to go straight... despite it supposedly being correct. *sigh*
Back to the tire shop tomorrow to see what they say.
Yes, I got my alignment done at a different place to my tires. People who did the alignment supplied, fitted and set up my coilovers so they should know if the alignment is right.
Back to the tire shop tomorrow to see what they say.
Yes, I got my alignment done at a different place to my tires. People who did the alignment supplied, fitted and set up my coilovers so they should know if the alignment is right.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG
-
HobartLancer09
- Lancer Newbie
- Posts: 68
- Joined: Sat Apr 09, 2011 5:53 pm
- Location: Hobart
Good on ya Paul .....
I'm assuming you have already opened the Air Intake Vent to look like this ....
In which case, you have one more simple thing to do ....
Reposition the factory horn .... either to another nearby bolt position or laid over horizontally.
The factory placement is smack in the middle of the incoming Air Flow Path.
All the cost and exercise to fit an RA Intake Snorkel & Open-Up the Air Intake Vents is being compromised because the Horn is positioned in such a manner that it disrupts the Incoming Air Flow Path.
It basically inhibits the Air Flow & deflects it in different directions rather than allow the air to flow to the 2 desired paths.
1) Through the Radiator.
2) Up into the Air Intake Vent.
I'm sure you've seen videos of wind tunnel test with introduced smoke that displays how air paths are effected by objects placed in its direct path.
Sam .....
Merlinised AspiRe 2.4L
I'm assuming you have already opened the Air Intake Vent to look like this ....
In which case, you have one more simple thing to do ....
Reposition the factory horn .... either to another nearby bolt position or laid over horizontally.
The factory placement is smack in the middle of the incoming Air Flow Path.
All the cost and exercise to fit an RA Intake Snorkel & Open-Up the Air Intake Vents is being compromised because the Horn is positioned in such a manner that it disrupts the Incoming Air Flow Path.
It basically inhibits the Air Flow & deflects it in different directions rather than allow the air to flow to the 2 desired paths.
1) Through the Radiator.
2) Up into the Air Intake Vent.
I'm sure you've seen videos of wind tunnel test with introduced smoke that displays how air paths are effected by objects placed in its direct path.
Sam .....
Merlinised AspiRe 2.4L
Last edited by SAM-24A on Sat Apr 21, 2012 5:07 pm, edited 1 time in total.
-
HobartLancer09
- Lancer Newbie
- Posts: 68
- Joined: Sat Apr 09, 2011 5:53 pm
- Location: Hobart
-
alterego13
- Lancer VR/GT
- Posts: 293
- Joined: Mon Aug 01, 2011 5:47 pm
- Location: Perth, Australia
)
My neighbour Steve owns his own business selling car detailing products and stuff for garages so I went to his business today to try different branded products other than the usual Meguiars, Autoglym etc etc. He is the Australian distributor of Griot's Car Care products amongst other things.
I ended up buying some Griot's Best of Show Wax, Speed Shine, Microfibre Dry Towel and Microfibre Speed Shine Cloths.
I then washed and waxed the car. I will let the results speak for themselves. Please excuse the picture quality:
Keep in mind I don't really wash my car very often!
I was absolutely astounded at how shiny and reflective my car was and the microfibre drying towel was SO absorbent; I dried the whole car without needing to wring the towel!
Take a look at his website www.garagepro.com.au and either order online or let me know if you want anything. He will bring it back from work for me that same day and I can send it out the next day
He couldn't speak highly enough of the Griot's Paint Cleaning Clay and the Dry Towel, so give them a shot and you will not be disappointed!
I ended up buying some Griot's Best of Show Wax, Speed Shine, Microfibre Dry Towel and Microfibre Speed Shine Cloths.
I then washed and waxed the car. I will let the results speak for themselves. Please excuse the picture quality:
Keep in mind I don't really wash my car very often!
I was absolutely astounded at how shiny and reflective my car was and the microfibre drying towel was SO absorbent; I dried the whole car without needing to wring the towel!
Take a look at his website www.garagepro.com.au and either order online or let me know if you want anything. He will bring it back from work for me that same day and I can send it out the next day
He couldn't speak highly enough of the Griot's Paint Cleaning Clay and the Dry Towel, so give them a shot and you will not be disappointed!
Who is online
Users browsing this forum: No registered users and 152 guests