***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

What did you do on your car today?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

Post Reply
bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Sat Apr 14, 2012 5:56 pm

Dirtee, i HOPE they are your Sisters tools in that pink bag again :P
User avatar
timmo91
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 436
Joined: Wed Nov 23, 2011 9:55 pm
Location: Queanbeyan, Australia

Postby timmo91 » Sat Apr 14, 2012 5:58 pm

JustinR wrote:Thats cute you guys have matching engine bays :P You listened to my advice (well peanuts), and locked the wheels didnt you ;)

It sure was better than taking the wheel off :P
User avatar
Dazz4C
Lancer VR/GT
Lancer VR/GT
Posts: 227
Joined: Tue Jan 05, 2010 9:09 am
Location: Brisbane

Postby Dazz4C » Sat Apr 14, 2012 6:23 pm

Installed tail lights. Though the drivers side doesn't always turn on (same with the driver side LED parker...). Issue with the parker has always been there. Perhaps crappy wiring...

Image

Drivers side also flickers/dims very lowly when the light have turned off for about 30 seconds to 2 minutes (maybe I might need to put a resistor in there somewhere.)
User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sat Apr 14, 2012 6:24 pm

very Nice.

I washed the Car today after all the rain stopped.
User avatar
timmo91
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 436
Joined: Wed Nov 23, 2011 9:55 pm
Location: Queanbeyan, Australia

Postby timmo91 » Sat Apr 14, 2012 6:43 pm

Dazz4C wrote:Installed tail lights. Though the drivers side doesnt always turn on (same with the driver side LED parker...). Issue with the parker has always been there. Perhaps crappy wiring... [img:0f878f90e8]http://i.imgur.com/5USLw.jpg[/img:0f878f90e8] Drivers side also flickers/dims very lowly when the light have turned off for about 30 seconds to 2 minutes (maybe I might need to put a resistor in there somewhere.)
This excact thing happened to me :( Just need to get a new set of parkers... should fix the problem.
User avatar
Dazz4C
Lancer VR/GT
Lancer VR/GT
Posts: 227
Joined: Tue Jan 05, 2010 9:09 am
Location: Brisbane

Postby Dazz4C » Sat Apr 14, 2012 6:51 pm

timmo91 wrote:This excact thing happened to me :( Just need to get a new set of parkers... should fix the problem.


I tried pulling out the driver's side parker - seems to be the same. I'll try pulling out both and see what happens.

EDIT: Pulled out and tested. Same thing happens. Put in some other LED's in the parkers, and it still happens.

This happens in sync with the rear LED tail lights, so it's probably the wiring.
User avatar
timmo91
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 436
Joined: Wed Nov 23, 2011 9:55 pm
Location: Queanbeyan, Australia

Postby timmo91 » Sat Apr 14, 2012 7:03 pm

Dazz4C wrote:[quote:8f1f0cf674=timmo91]This excact thing happened to me :( Just need to get a new set of parkers... should fix the problem.[/quote:8f1f0cf674] I tried pulling out the drivers side parker - seems to be the same. Ill try pulling out both and see what happens.
Oh ok :/ strange...
User avatar
Bags
Lancer Newbie
Lancer Newbie
Posts: 78
Joined: Sat Aug 20, 2011 2:18 pm
Location: Melbourne

Postby Bags » Sat Apr 14, 2012 7:08 pm

SAM-24A wrote:Hey Ben ..... read this thread: BC Coilovers Sam .... *thumb*

Thanks Sam, I have had a read there and think that is the way I will go. From the way I read that SKU B-19RA will suit MY11 SX yeah? That is what I interpreted anyway but I am VERY tired!
User avatar
dragansj
Lancer ES/EX
Lancer ES/EX
Posts: 137
Joined: Wed Nov 25, 2009 11:22 am
Location: Sydney, Australia

Postby dragansj » Mon Apr 16, 2012 12:16 pm

Installed 4 replacement speakers and sound deadened the doors ..... much bettera now.
User avatar
timmo91
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 436
Joined: Wed Nov 23, 2011 9:55 pm
Location: Queanbeyan, Australia

Postby timmo91 » Tue Apr 17, 2012 11:08 pm

Wow those wheels look killer Ryan! Well done :D
User avatar
T-All3NT
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 301
Joined: Wed Dec 21, 2011 8:51 pm
Location: Canberra, Australia

Postby T-All3NT » Tue Apr 17, 2012 11:20 pm

fixed my trunk light cause they fell out of the zipties idk how but its fixed now
User avatar
timmo91
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 436
Joined: Wed Nov 23, 2011 9:55 pm
Location: Queanbeyan, Australia

Postby timmo91 » Tue Apr 17, 2012 11:22 pm

T-All3NT wrote:fixed my trunk light cause they fell out of the zipties idk how but its fixed now

Yeahh mine is slowly peeling of :P Gotta try zip tie it down..
User avatar
T-All3NT
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 301
Joined: Wed Dec 21, 2011 8:51 pm
Location: Canberra, Australia

Postby T-All3NT » Tue Apr 17, 2012 11:24 pm

timmo91 wrote: Yeahh mine is slowly peeling of :P Gotta try zip tie it down..

its sort of annoying to get it down, cause none of the holes in the trunk line up lol, i found the easiest way is to loosely do up the zips and then slide the leds through and tighten
User avatar
timmo91
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 436
Joined: Wed Nov 23, 2011 9:55 pm
Location: Queanbeyan, Australia

Postby timmo91 » Tue Apr 17, 2012 11:26 pm

T-All3NT wrote:[quote:1e7c30e9e5=timmo91] Yeahh mine is slowly peeling of :P Gotta try zip tie it down..[/quote:1e7c30e9e5] its sort of annoying to get it down, cause none of the holes in the trunk line up lol, i found the easiest way is to loosely do up the zips and then slide the leds through and tighten
Ah yeah, will give it a go when I get some time.
Post Reply

Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 73 guests