***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
What did you do on your car today?
Moderators: Moderators, Senior Moderators
- Mr Charisma
- Lancer Evolution

- Posts: 876
- Joined: Wed Apr 29, 2009 9:09 pm
- Location: Central Coast, Straya.
amascaro08 wrote:[quote:6831639ffe=BRE88N][quote:320f398bda=amascaro08]Installed my LED strips today [img:866d28a219]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/522382_10150890882662738_529307737_12859611_394184762_n.jpg[/img:866d28a219][/quote:320f398bda] where did u get the led strips from[/quote:6831639ffe] Got them from autobarn mate cost about $40 and about 10 min of work to install em. Some guys here bough strips of oznium i think but they work out to be the same price after postage
how did u hook them up
- DORA_ANNE
- Lancer MASTER

- Posts: 2253
- Joined: Fri Jan 01, 2010 8:07 pm
- Location: Northern Rivers NSW AUSTRALIA
Mr Charisma wrote:Got my P0705 error code back againIt has been to the dealer twice this month, discovered that the car doesnt see Neutral anymore... A little bit dangerous if you go from Drive to N, car still thinks its in D... Guess I should take it back... again.
@ Phil .. I Just gave Wyong Mitsubishi a good Rap in another Thread so I do hope they get your car sorted , Have they given you an Idea what the trouble could be ?
Angels Are Sometimes Disguised As Friends
- Dirtee
- Lancer Legend

- Posts: 1297
- Joined: Mon Sep 26, 2011 8:31 pm
- Location: Canberra, Australia
- Contact:
Auszzie wrote:Got my new exhaust finally done. A full sports system was installed. Changed headers, high flow cat. Etc. my car now sounds mean
. Now to tune to get full use of the new exhaust. Photos and video will come soon.
Do you have an intake mod too? other wise theres no point getting a tune until both the breathing and exhaust side are done. because your car can push more through the exhaust but cant suck anymore than stock
- Mr Charisma
- Lancer Evolution

- Posts: 876
- Joined: Wed Apr 29, 2009 9:09 pm
- Location: Central Coast, Straya.
DORA_ANNE wrote: @ Phil .. I Just gave Wyong Mitsubishi a good Rap in another Thread so I do hope they get your car sorted , Have they given you an Idea what the trouble could be ?
Hey Doreen, granted the first time it went in for a major service, although I checked for error codes before I went and when I picked it up ( didn't drive it before checking ) and the error code was still there. Makes me wonder if they actually scanned it....
Took it in again and they scanned it, took some plug off the transmission and did a "wiggle test". May just be one of those things
Love that car!
- Platinum Ace
- Lancer Ralliart

- Posts: 632
- Joined: Sat Mar 17, 2012 1:31 pm
- Location: Townsville, Queensland
- DORA_ANNE
- Lancer MASTER

- Posts: 2253
- Joined: Fri Jan 01, 2010 8:07 pm
- Location: Northern Rivers NSW AUSTRALIA
Mr Charisma wrote:[quote:7460f3960c=DORA_ANNE] @ Phil .. I Just gave Wyong Mitsubishi a good Rap in another Thread so I do hope they get your car sorted , Have they given you an Idea what the trouble could be ?[/quote:7460f3960c] Hey Doreen, granted the first time it went in for a major service, although I checked for error codes before I went and when I picked it up ( didnt drive it before checking ) and the error code was still there. Makes me wonder if they actually scanned it.... Took it in again and they scanned it, took some plug off the transmission and did a wiggle test. May just be one of those things
Phil Didn't you say you were having trouble with the gears ? Or has that been fixed up ?

Angels Are Sometimes Disguised As Friends
- Mr Charisma
- Lancer Evolution

- Posts: 876
- Joined: Wed Apr 29, 2009 9:09 pm
- Location: Central Coast, Straya.
The plug apparently has to do with 'P' and 'N' being able to start the car and to disengage any of the forward or reverse gears. It is a 'Transmission Range Sensor Circuit Malfunction' that I'm getting.
Well pull up to our garage door, put it in 'N' ( shows 'N' on the dash ) and engage the handbrake to open the garage. Issue is it remains in 'D' and lurches forward, followed by a warning. Once you acknowledge the warning, the dash shows 'D'. Now we put it in 'P' which hasn't done it yet.
Well pull up to our garage door, put it in 'N' ( shows 'N' on the dash ) and engage the handbrake to open the garage. Issue is it remains in 'D' and lurches forward, followed by a warning. Once you acknowledge the warning, the dash shows 'D'. Now we put it in 'P' which hasn't done it yet.
Love that car!
DIY Painted My Engine & Spark Plug Covers

VRX 18" GunMetal Mag Wheels (TBA)
Whiteline 24mm Rear Sway Bar & Front Strut Brace
Reverse camera & Painted red calipers (+5Kw)
Carbon fibre Dash, Trim & B pillars Wrapped
LED Parkers & interior lights
Bonnet Gas Struts
Greddy Exhaust (coming soon)
BC Racing Coilovers (coming soon)
Whiteline 24mm Rear Sway Bar & Front Strut Brace
Reverse camera & Painted red calipers (+5Kw)
Carbon fibre Dash, Trim & B pillars Wrapped
LED Parkers & interior lights
Bonnet Gas Struts
Greddy Exhaust (coming soon)
BC Racing Coilovers (coming soon)
Who is online
Users browsing this forum: No registered users and 31 guests



