EVO X bumper bar Progress!
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Evo Rep Prts CCJ GB SEP'11
Moderator: Senior Moderators
Last edited by SEB15 on Mon Jan 23, 2012 3:22 pm, edited 1 time in total.
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
Im considering it since one of my front pods is cracked. Glued it back up and everything however ill need to get the splash guard and foggies to go along with it unless seb can provide them..? Cant remember if the evo front bars included the foggies...
Also seb, probably half the reason why the front bar holes underneith do not suite is because the RA splash tray is different to the NA lancer splash guard. However we will soon find out if im correct when someone puts it on their NA...
Also seb, probably half the reason why the front bar holes underneith do not suite is because the RA splash tray is different to the NA lancer splash guard. However we will soon find out if im correct when someone puts it on their NA...
bd-850 wrote:umm im not sure if you know, but did you know your garage is built upside down But it looks good (part from that close up pic)
On close up pic i just to put the bar on to see how it looks!
and lol for the garage!
tadz0rz wrote:Whats the plans for the old RA bar....
Not selling the RA bar from 2 reasons:
1. I'm NOT 100% happy with the new bar
2. The new bar seems to be pretty fragile
Sorry Tadz0rz!
13EZY wrote:Looks good seb
Thanks!
Last edited by SEB15 on Mon Jan 23, 2012 6:37 pm, edited 1 time in total.
SEB15 wrote:[quote:733d5b2dd1=bd-850]umm im not sure if you know, but did you know your garage is built upside down But it looks good (part from that close up pic)[/quote:733d5b2dd1] On close up pic i just to put the bar on to see how it looks! and lol for the garage!
well thats ok then, so Yes the bar looks good
bar is on but there is a 1" gap (25mm) between the bonnet when fully closed and the top of the bar
tow point cover has no clips and i will have to glue it in place or just have a hole in the front of my bar
black plastic covers doesnt sit down properly, will need to trim a little bit of plastic out where you put your hand to open bonnet latch
the rest of it fits fine
tow point cover has no clips and i will have to glue it in place or just have a hole in the front of my bar
black plastic covers doesnt sit down properly, will need to trim a little bit of plastic out where you put your hand to open bonnet latch
the rest of it fits fine
just had another look at it on the car, i have taken the rubber strip off the OEM bar and put that in place (sat there) and realised i have to drill the holes for the clips, the metal brakets that secure the OEM bar to the front bracing needs to be removed from OEM bar and attached to new bar - rivet holes need to be drilled, the big white clips need to be taken off the OEM bar and holes drilled in new bar and have them rivetted to it (they clip in under the headlights.
im thinking that when the metal bracket goes on it will lift the top of the new bar and push it out a little so as to reduce that 1" gap
im thinking that when the metal bracket goes on it will lift the top of the new bar and push it out a little so as to reduce that 1" gap
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 28 guests