***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

New Headlights on the market !!

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Thu Dec 15, 2011 8:53 am

you will need a switching relay (i think thats the name) about $15 from REPCO I research the exact same process when I wanted to wire on AE.

The relay takes power from 2 sources (your low beam and your parker circuit) the relay works by passing current through when the park circuit is active, but when the low beam circuit gains power the relay will close and stop any current passing through. These relays look exactly the same as a normal relay, all you would need is to cut the write wires and connect them.

User avatar
craigeth
Lancer VR/GT
Lancer VR/GT
Posts: 249
Joined: Thu May 19, 2011 11:25 am
Location: Cairns, Australia
Contact:

Postby craigeth » Thu Dec 15, 2011 8:54 am

Can't wait to see pictures.
Twenty Three Frames - Photography and Video Production
www.twentythreeframes.com

User avatar
Flying Ace
Lancer Newbie
Lancer Newbie
Posts: 69
Joined: Thu Oct 14, 2010 4:26 pm
Location: Sunshine Coast, QLD, Australia

Postby Flying Ace » Thu Dec 15, 2011 9:01 am

I'm just uploading some pics now :)

They cost me $600 including postage, which I thought was reasonable. Postage was about $80.

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Thu Dec 15, 2011 9:02 am

Yeah pictures would be awesome, these are on the to do list!! If a group buy goes ahead with these things im jumping on it straight away!! :D
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
Flying Ace
Lancer Newbie
Lancer Newbie
Posts: 69
Joined: Thu Oct 14, 2010 4:26 pm
Location: Sunshine Coast, QLD, Australia

Postby Flying Ace » Thu Dec 15, 2011 9:12 am

Some pics for you :)

Please excuse my filthy car!

Image

Image

Image

Image

I'll take the front apart again on the weekend and take some pics of the back of the lights so you can see what I mean about the HIDs!

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Thu Dec 15, 2011 9:17 am

tough!!

How much did it cost you shipped here buddy?
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

User avatar
Flying Ace
Lancer Newbie
Lancer Newbie
Posts: 69
Joined: Thu Oct 14, 2010 4:26 pm
Location: Sunshine Coast, QLD, Australia

Postby Flying Ace » Thu Dec 15, 2011 9:17 am

Around $600 including postage, which was $80 or so

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Dec 15, 2011 9:18 am

Well the cost of the headlamps to me is A$300. So we're looking at a buffer of A$300 for postage which I think we surely can do for less.

So long as we never go by sea again.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Flying Ace
Lancer Newbie
Lancer Newbie
Posts: 69
Joined: Thu Oct 14, 2010 4:26 pm
Location: Sunshine Coast, QLD, Australia

Postby Flying Ace » Thu Dec 15, 2011 9:20 am

Yeah, I knew I'd be paying a lot more than waiting for the group buy, but I had the money and didn't want to wait :P

User avatar
MRWOLF
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 304
Joined: Wed Aug 10, 2011 10:58 am
Location: Mount Annan,Australia

Postby MRWOLF » Thu Dec 15, 2011 9:53 am

Flying Ace wrote:I 2) The CCFL Angel eyes have a slight green tinge to them.


In the last photo you can notice the green tinge.
Was wondering at night time is the green tinge really noticeable or is just slightly?

But most of all, congratulations!!! Very nice headlights

Also the LED is on constantly on it's because they are exactly like Parker lights they will always be on unless you do what Chubb said and buy the relay

But again
Congratulations they look stunning!!!
Mine's quicker then yours!!!

Range Rover Sport 2014-
2013 WRX: 2013-
2009 Lancer: 2010-2013
2003 Astra: 2008-2010

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Dec 15, 2011 9:56 am

Flying Ace wrote:Yeah, I knew Id be paying a lot more than waiting for the group buy, but I had the money and didnt want to wait :P


Could you take some pictures of the wiring round the back please?

Nothing against you. You're welcomed to do what you did.

I'm just hoping you can support the rest of the club by showing us more detailed pictures of it so we can assess it.

also how are the lenses?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Flying Ace
Lancer Newbie
Lancer Newbie
Posts: 69
Joined: Thu Oct 14, 2010 4:26 pm
Location: Sunshine Coast, QLD, Australia

Postby Flying Ace » Thu Dec 15, 2011 9:57 am

The green tinge is most noticeable at night. In daylight it's not so bad. I'm happy to keep the parkers (on the sides) on at night, it's just that the angel eyes are really bright in the dark, and they kind of detract from the effect if they're on when the headlights are on too.

I'm not really that confident with electrics, would it cost much to get an auto electrician to do the relays up for me?

User avatar
Flying Ace
Lancer Newbie
Lancer Newbie
Posts: 69
Joined: Thu Oct 14, 2010 4:26 pm
Location: Sunshine Coast, QLD, Australia

Postby Flying Ace » Thu Dec 15, 2011 9:59 am

The lenses seem fine, I am not used to projectors so the sharp cutoff is somewhat of a novelty to me.

They appear to be quite well built, everything feels really solid. I want to get some sort of headlight protector film though as the lens at the front is just plastic (or polycarbonate) and I don't want to get it damaged by a stray rock!)

User avatar
Flying Ace
Lancer Newbie
Lancer Newbie
Posts: 69
Joined: Thu Oct 14, 2010 4:26 pm
Location: Sunshine Coast, QLD, Australia

Postby Flying Ace » Thu Dec 15, 2011 10:05 am

Image
(Have no idea why the uploader turned my image upside down, weird).

This is inside the dust/water cover of the projector. The wiring seems to disappear through the bottom which leads me to believe fitting HIDs (with the excess wiring that entails) might be a bit of an issue. Also the people I bought it off said you need to make sure the HIDs have UV blocking glass as the warranty will be void of the lens fogs up/discolours because of cheaper HID kits being used.

I will take off the bumper again on the weekend and remove the headlights and have a bit of a better look for you.

User avatar
hansmitchel
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 332
Joined: Tue Dec 15, 2009 3:02 pm
Location: Melbourne, Australia

Postby hansmitchel » Thu Dec 15, 2011 10:50 am

Some night pictures would be great as well please.

Thanks :)


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 49 guests