***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

OEM HID bulbs

Servicing, Oil Changes, Fluids & Much More.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
TYR
INACTIVE Member Account
Posts: 13
Joined: Sat Nov 05, 2011 3:33 pm
Location: NT AUS

OEM HID bulbs

Postby TYR » Fri Nov 18, 2011 2:55 pm

What type of xenon Blub is fitted in the OEM HIS's?
Hail to the Hammer
User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Fri Nov 18, 2011 7:07 pm

Hi Michael.

Mitsu Lancer HID's .... HID-D2S
Image

Sourced from: Sylvania Bulb Replacement Guide


Sam .... :wink:
Last edited by SAM-24A on Mon Jun 18, 2012 7:41 pm, edited 1 time in total.
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L
User avatar
TYR
INACTIVE Member Account
Posts: 13
Joined: Sat Nov 05, 2011 3:33 pm
Location: NT AUS

Postby TYR » Fri Nov 18, 2011 9:08 pm

Dose it matter what watage and voltage it is
do you have to match to what ever the balist requiers?
Hail to the Hammer
User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Sat Nov 19, 2011 10:37 am

Personally I would keep it to match what is stock. Too higher wattage and you might end up blinding people!!

If they are the same as the D1S I run, they should be 35watt.

I don't think the voltage changes....
User avatar
TYR
INACTIVE Member Account
Posts: 13
Joined: Sat Nov 05, 2011 3:33 pm
Location: NT AUS

Postby TYR » Sat Nov 19, 2011 2:01 pm

So if i was to fit a Philips 6700K Xenon wich is 35W 85V it wont do anything to the balist?
Hail to the Hammer
Post Reply

Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 37 guests