***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

New Dash Mat - PICS!

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Fri Apr 10, 2009 1:32 pm

Ok, here's a couple of pics of my dash mat - sorry they are phone camera ones, but it shows the location and size of the cut out - which matches the break in the dash from the photo Whitlam found above.

Please note I haven't stuck the mat down or straightened it properly yet, that's why it's still a bit bent.

Image

Image
ClubCJ's first Sportback

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Fri Apr 10, 2009 1:38 pm

An interesting note I just thought of as well - the current outlander has an almost identical dash as the lancer - except it is a bit higher and there is a secondary glove box above where ours is, in the vacant space between the two air vents in the pic above. Therefore, the Outlander air bag must also be in the top of the dash, and not in the front or lower area near the coloured bar feature.
ClubCJ's first Sportback

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Fri Apr 10, 2009 1:46 pm

i was looking at the outlander aswell, but i couldnt get a good clear picture of the airbag deployed in the dash. Urghh! I think next week im gunna call mitsubishi head office. Im not sure if they will give me the answers that im looking for but maybe they can send me in the right directions on who to contact
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Fri Apr 10, 2009 1:53 pm

Well, we know for sure that Shevron think it's at the top of the dash!!
ClubCJ's first Sportback

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Fri Apr 10, 2009 2:06 pm

well yeah, but they also left that pannel at the front un convered so maybe their unsure :P. Ill ring mitsu's head office, maybe they can pass me onto someone who knows the technical specs in the ways of airbag deployment.

Well...if anyone finds a pic of the passenger airbag deployed on the lancer please post it up, or even if you have any information about it we would all like to know!
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Fri Apr 10, 2009 2:44 pm

Dude, that bit is probably uncovered as it is not as exposed to the sun as the top of the dash....
ClubCJ's first Sportback

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Fri Apr 10, 2009 2:57 pm

if i was a dash manufacturer and didnt have to worry about airbags id cover that part of the dash
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

Dummer

Postby Dummer » Mon Apr 20, 2009 7:17 am

I've come back to work today and am greeted by 3 emails from Haigh and it seems they followed it up very quickly.

Also on the previous weekend I had my dash out to install my new amp and sub I also took out the glove box's "roof cover' to check out the airbag module and it seems very solid on the part facing the the space above the glove box and seemed to confirmed the suspiscions of SIR-VRX and others here. So between the design of the outlander's dash, the workshop manual and a physical inspection it seems almost certain now that the air bag does deploy from the top of the dash.

Now here are the emails for you reading pleasure :lol: I'll keep this thread updated if I receive any new information!
----------------------------------------------------
From: Ken Shepherd
Sent: Tuesday, 14 April 2009 8:28 AM
To: Connor, Ryan M
Subject: dash mat



G’day Ryan,

Thanks for your information, we will attending to it today and will respond as soon as possible.

Regards

Ken Shepherd.

----------------------------------------------------------------

From: Ken Shepherd [mailto:kens@haigh.com.au]
Sent: Wednesday, 15 April 2009 6:56 AM
To: Connor, Ryan M
Subject: dash mat


G’day Ryan,

We have not received any information on the question you raised as yet; I did however put a stop on sales until it is resolved.

Regards

Ken Shepherd
--------------------------------------------------------------------

From: Ken Shepherd [mailto:kens@haigh.com.au]
Sent: Thursday, 16 April 2009 9:18 AM
To: Connor, Ryan M
Subject: dash mat


G’day Ryan,

I have decided to make a change to the dash mat design and incorporate a flap in the air bag area, only because there has been no concrete information as to where the air bag deploys.

The design was in accordance with information given to us, now we have questioned this we are getting conflicting opinions .The original design allowed for the bag to deploy through the front panel, this meant the whole dash board would not have to be replace, which sounded logical as this is the practice many manufacturers follow. The other opinion is the bag deploys higher up on the dash, which would mean the whole dash would have to replace should the bag be activated.

While they follow up on our question I have changed the design, they are of the opinion the dash mat would not impede the operation of the air bag as it is, the velocity the bag deploys at is very high.

We are quite happy to supply you with a new design mat, if you forward me an address.

Regards

Ken Shepherd.

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Mon Apr 20, 2009 8:05 am

Looks like tadz0rz is getting a new dash mat. Ill email these guys tonight
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Mon Apr 20, 2009 8:35 am

Hi Ryan, thanks for posting. Good to see an honest and open manufacturer/retailer still exists.
ClubCJ's first Sportback

crudman
Lancer Newbie
Lancer Newbie
Posts: 77
Joined: Tue Apr 07, 2009 1:15 am
Location: Sydney, NSW, Australia

Postby crudman » Mon Apr 20, 2009 7:27 pm

lol the one in the op matches my floor mats

User avatar
asHxP
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Wed Mar 18, 2009 5:48 pm
Location: Sydney, NSW, Australia

Postby asHxP » Mon Apr 20, 2009 7:47 pm

This might explain why its been 4 weeks and mine hasn't come in yet lol. Geeze man its all your fault!!! Nah jks.. good work :)

Dummer

Postby Dummer » Mon Apr 20, 2009 7:49 pm

nah mate I only emailed them a week ago. But you should hopefully get one with a flap in it.

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Mon Apr 20, 2009 8:18 pm

Ive just emailed them. Will they replace mine with the blue trim and monogram with the flap?

If they do...would i have to send my old one back to them?
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

Dummer

Postby Dummer » Mon Apr 20, 2009 8:41 pm

Yeah they replacing mine with the trim aswell. Dont know, doesnt sound like they want it back.


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 23 guests