***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Fitting at HSV Top Ryde?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

User avatar
asHxP
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Wed Mar 18, 2009 5:48 pm
Location: Sydney, NSW, Australia

Fitting at HSV Top Ryde?

Postby asHxP » Sun Apr 19, 2009 9:22 pm

Hey Guys,

Just wondering if anyone has any history with these guys

http://ssv.com.au/

Since im a bit chicken on installing my angel eyes myself, Im thinking of getting them to install my angel eyes.. but being over protective of my car, I'm scared they might screw it up. Anyone know if they're any good?

Cheers~

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Sun Apr 19, 2009 9:38 pm

well at least if they screw it up they have to pay for it to get it fixed. If you screw it up your screwed :P. If your getting your car modded just make sure you ask them heaps of questions, Even be blunt about it, just be like what if you screw something up? or one of your guys breaks something. Will you pay to replace it ect? And try to get something signed up so he cant say he never said that if it gets to that point.
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Sun Apr 19, 2009 11:40 pm

Mattigins our other Admin done them himself.
and if he can do it, anyone can.....lol...

no goodluck! with them, try that place if you are unsure about installing them.

User avatar
asHxP
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Wed Mar 18, 2009 5:48 pm
Location: Sydney, NSW, Australia

Postby asHxP » Mon Apr 20, 2009 5:50 pm

LoL all the way in Forster!! I'll get a quote first and i'll weigh out my options hehe. Just wondering... i just realised... do both rings appear on each light without highbeam?? Or do both only turn on when highbeam is on?

User avatar
asHxP
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Wed Mar 18, 2009 5:48 pm
Location: Sydney, NSW, Australia

Postby asHxP » Mon Apr 27, 2009 3:58 pm

Ok... instead of going to my biochem lecture I decided to bring my side skirts (not angel eyes) to get a quote on how much they will fit them for. I know there is a DIY but unless someone wants to help me put them on... Im really hesitant on drilling into my metal, especially when I know I am prone to do things wrongly. But anyways the dealer told me he doesnt want to drill into the car coz in the long run rust might build up and cost more problems, but instead its better to glue it on and leave it there over night. To do that he said they'll charge me $280... What do you guys reckon?

dumb&

Postby dumb& » Mon Apr 27, 2009 4:11 pm

$280 to glue it to the car? Seems excessive.

What side skirts are they?

Marsh
Lancer VR/GT
Lancer VR/GT
Posts: 214
Joined: Mon Jan 12, 2009 2:35 pm
Location: Australia

Postby Marsh » Mon Apr 27, 2009 4:16 pm

daveee wrote:$280 to glue it to the car? Seems excessive.


Agreed. Considering it would probably be a half hour job for them.

User avatar
asHxP
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Wed Mar 18, 2009 5:48 pm
Location: Sydney, NSW, Australia

Postby asHxP » Mon Apr 27, 2009 4:19 pm

Yeah I agree... they are the ones shadows sell.

I asked whether I could bring it in early in the morning and collect it at the end of the day (since they are open from 8:30-6pm) but he still insisted in saying he had to keep it over night. So yeah I dont really think its worth it unless im desperate

dumb&

Postby dumb& » Mon Apr 27, 2009 5:02 pm

Shouldn't shadows attach to where the VRX side skirts attach - they should pretty much be clip ins and the holes should be there as far as I am aware.

Pull off your mud guards and check it out - they probably use the same holes they are attached with.

User avatar
asHxP
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Wed Mar 18, 2009 5:48 pm
Location: Sydney, NSW, Australia

Postby asHxP » Mon Apr 27, 2009 5:06 pm

They are there.. but if you read the installation pdf for the side skirts it involves a bit of drilling and stuff into the metal chassis. That is my main concern.. screwing it up and ending up drilling in the wrong place =/


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 113 guests