*CLOSED* Evo Rep Prts CCJ GB SEP'11

[ofey]

It's not the same kit.

If you look at the picture on the first post and the one you've linked to, look at the front lip corner edge just next to the fog lamp and how it's finished.


the one you've linked to has a sharp edge finish whilst the one we're getting is a little more rounded.

Also that kit you've linked to has no chrome bits at all.

My question to you is what's your point??
There are many Evo X replica bumper bars on the market.
Have you also found out what material the one you linked to is made of?

[big_d]

Easy tiger!

Thanks for pointing out it's not exactly the same kit.
I only posted the pic as someone may be curious as to what the kit looks like fitted on a Lancer and this one 'looked' similar

[ofey]

Easy tiger! Thanks for pointing out its not exactly the same kit. I only posted the pic as someone may be curious as to what the kit looks like fitted on a Lancer and this one looked similar

If you provide accurate information, then it's not so bad. But if you don't, I will have have to provide corrections as I have in this case.

Much ado about nothing aye?

[ofey]

UPDATE

Can those who haven't yet paid, please do so ASAP?

tnode, please send payment for your remaining parts.

EOI
1. ofey VIC replica Evo X Bonnet *PAID*
3. Glen QLD replica Evo X Bonnet *PAID*
4. 13EZY QLD replica Evo X Bonnet *PAID*
5. aspir3 SA replica Evo X Bonnet *PAID*
6. RibbandsJM WA replica Evo X Bonnet *PAID*
7. klue2k NSW replica Evo X Bonnet *PAID*
9. nutterbug VIC replica Evo X Bonnet *PAID*
11. Longinus VIC replica Evo X Bonnet *PAID*
12. RyanMK SA Replica Evo X Boonet *PAID*\
2. scraverx ACT replica Evo X Bonnet
10. tnode SA replica Evo X Bonnet
[s]8. driftnut:(( NSW replica Evo X Bonnet[/s]

13. rthieu VIC Evo X Wing CF ALL
14. whitenight QLD Evo X Wing 1/2 CF

15. Dean QLD LED Tail Lamp
16. tnode SA LED Tail Lamp
17. Miss Aussie SA LED Tail Lamp

18. Meaty VIC Replica Evo X Rear Bar *PAID*
19. hansmitchel VIC Replica Evo X Front Bar

20. klue2k NSW Replica Evo X Rear Bar *PAID*
21. monty888 NSW Replica Evo X Front Bar *PAID*

22. Fitter QLD Replica Evo X Front Bar *DEPOSIT of A$250*
23. Glen QLD Replica Evo X Rear Bar *PAID*

[s]24. driftnut:(( NSWReplica Evo X Front Bar
25. driftnut:(( NSW Replica Evo X Rear Bar[/s]

24. seb15 QLD Evo X Front Bar *PAID*

26. ash06 NSW Replica Evo X Front Bar
27. Miss Aussie SA Replica Evo X Rear Bar

28. tnode SA Replica Evo X Front Bar *PAID*
29. tnode SA Replica Evo X Rear Bar *PAID*

30. Longinus VIC Replica Evo X Front Bar *PAID*
31. Longinus VIC Replica Evo X Rear Bar *PAID*

[tnode]

Will send payment tonight, apologies for the delay.

-tnode

[SEB15]

The front bar will fit ok on the RA? I read in the first posts that it could be some minor dramas to fitt the fog lights

[LZY_EYE]

If the front bar is suited to the NA foglights, the RA ones will most likely not fit.

Guys whom have put an RA front bar on their NA need to get new foglights.

[ofey]

If the front bar is suited to the NA foglights, the RA ones will most likely not fit. Guys whom have put an RA front bar on their NA need to get new foglights.

You're right... .
Obviously.

[Meaty]

does the shape of the RA foglights differ so much ? as they both fit into the actual front bar and not mounted onto the chassis right ?

So would it not depend on how the front bar is equiped to seat foglights rather then which foglights your trying to install.

I only ask this in general as i feel its a valid question, otherwise correct me as i can be wrong.

[whitenight]

im sorry ofey but i will have to pull out of this one.

[tnode]

Second payment made $950.

-tnode

[jmannewitz]

jsut joined and saw this post.

I am interested in the front and rear body kit. what is the cost (USA) for the front and rear kit and does it come with side body pieces?

[ofey]

@jmannewitz : This is where it gets tough.
We're primarily an Australian Club.
The group buy system works because we can get the numbers to buy directly from the manufacturer and everyone shares shipping to Australia. Onward shipping then goes on a state by state basis.

I don't think it's financially viable for you to join in since you would have to pay a share of the shipping from our manufacturer in Taiwan to Australia then I will have to dispatch it again from Australia to the USA.

All amounts to alot of money and no savings for you.

[PYLee]

there's so many vendors in the states that can source it for you , and pretty sure at a cheap price aswell

if only we get prices that you guys get in the states

just for comparison , a german coilover KW V3 cost AUD$2999 here through Australian Vendor and it's under USD$2000 for the guys in the states.

Talk about 50% price difference

[RibbandsJM]

Ofey, is that a stage order, like when all the bonnets pay they get shipped, or is it when everything is paid for, everything is shipped?