***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Evo Rep Prts CCJ GB SEP'11
Moderator: Senior Moderators
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Meaty wrote:Irving, i cant seem to find a updated list of EOIs with your usual highlighting *Paid* next to those that have.........normally first post ?
At this point, I still have no one who has paid me. My bank has no funds from anyone yet and I don't really update immediately. I do it when I can.
mzralliart wrote:Hey is the evo x bonnet the same as the ralliart? im finding it a little hard to spot the difference?
Yeap they're both similar.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
There's been alot of PMs to me about how much to pay and when everything will happen.
Payment
I've put up the first set of pricing. This is for the parts cleared all the way to my doorstep here in Melbourne. This is the first instalment.
A 2nd instalment would be needed to get the items out the various states.
For those in Melbourne, I am going to charge you guys as well a bit so that you offset the costs for those elsewhere. This is keeping in line with our new practice of making it more fair for everyone regardless of where they are located.
I have never shipped by sea before so I don't know what charges we may be hit by. I've spoken to a couple of clearing agents in Melbourne and they've given me a ball park. Now I've worked this into the cost for the items as well. this may be over budgeted or under budgeted which is why I'm making it clear that abit more may need to be paid once its all done.
On top of this, I also have a Bank TT fee to pay to send the money to the manufacturer.
Ideally you can give me the full amounts I've put up.
It's wholly an issue of trust I understand so I've also left it to peoples discretion what they want their deposit to be.
This amount should though be > than 35% the cost of your item.
Bear in mind though that whatever shortage in the amount, I have to cover out of my own pocket. I am willing to do this to complete this trade.
Time Frame
The longer people take to put up their deposits,the later we will be.
I have money to cough out the over A$20,000 in costs to get it all done but I'd much rather not have to pool all the money myself.
Checks
On another front, I have to mention that I have to the best of my efforts made all the relevant checks on all parts to ensure they are of appropriate quality, The tail lamps and spoilers are a given since we have purchased from these people before but the bodykits and bonnest are all an unknown. So I hope people realise there are still some risks involved.
The manufacturer though has proved to be reliable and I don't see a need to doubt them at this stage.
Payment
I've put up the first set of pricing. This is for the parts cleared all the way to my doorstep here in Melbourne. This is the first instalment.
A 2nd instalment would be needed to get the items out the various states.
For those in Melbourne, I am going to charge you guys as well a bit so that you offset the costs for those elsewhere. This is keeping in line with our new practice of making it more fair for everyone regardless of where they are located.
I have never shipped by sea before so I don't know what charges we may be hit by. I've spoken to a couple of clearing agents in Melbourne and they've given me a ball park. Now I've worked this into the cost for the items as well. this may be over budgeted or under budgeted which is why I'm making it clear that abit more may need to be paid once its all done.
On top of this, I also have a Bank TT fee to pay to send the money to the manufacturer.
Ideally you can give me the full amounts I've put up.
It's wholly an issue of trust I understand so I've also left it to peoples discretion what they want their deposit to be.
This amount should though be > than 35% the cost of your item.
Bear in mind though that whatever shortage in the amount, I have to cover out of my own pocket. I am willing to do this to complete this trade.
Time Frame
The longer people take to put up their deposits,the later we will be.
I have money to cough out the over A$20,000 in costs to get it all done but I'd much rather not have to pool all the money myself.
Checks
On another front, I have to mention that I have to the best of my efforts made all the relevant checks on all parts to ensure they are of appropriate quality, The tail lamps and spoilers are a given since we have purchased from these people before but the bodykits and bonnest are all an unknown. So I hope people realise there are still some risks involved.
The manufacturer though has proved to be reliable and I don't see a need to doubt them at this stage.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I might have some good news coming for you boys soon.
In case you don't know how I work when I deal with manufacturers, first I squeeze them on price then on shipping.
when all comes to an end, I ask for freebies or add ons.
For those who are buying complete bodykits, for that abit more we may be getting a couple of nice things.
And for those of you who have and have not paid up. The payment list is on the first post on the first page.
The longer you delay, the more interest I make on the money and you people won't like that would you? How's that for incentive to pay up ASAP!?
Stay tuned... .
In case you don't know how I work when I deal with manufacturers, first I squeeze them on price then on shipping.
when all comes to an end, I ask for freebies or add ons.
For those who are buying complete bodykits, for that abit more we may be getting a couple of nice things.
And for those of you who have and have not paid up. The payment list is on the first post on the first page.
The longer you delay, the more interest I make on the money and you people won't like that would you? How's that for incentive to pay up ASAP!?
Stay tuned... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- RibbandsJM
- Lancer VR/GT
- Posts: 294
- Joined: Fri May 14, 2010 9:37 pm
- Location: Perth, Australia
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 5 guests