***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Performance Package

Local WA State News, Meets, Cruises, Information & Talk.

Moderators: Moderators, Senior Moderators

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Tue Aug 30, 2011 12:58 pm

cammag5 wrote:are there any good places with packages like this in QLD?


what do you want to get done?

User avatar
cammag5
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Wed Jun 01, 2011 1:47 pm
Location: Brisbane, Australia

Postby cammag5 » Thu Sep 08, 2011 10:06 am

I would really like a full exhaust, air intake and ECU tune/upgrade and then at some stage get it lowered

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Sep 08, 2011 10:09 am

Just a thought, the air intake you can DIY. No point paying a wrench monkey A$100/hr to do something you can.

If you have the right tools, you can lower it via springs or coilovers yourself.

Tuning can be done remotely via Merlin as well.

Only the exhaust will require a professional.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
cammag5
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Wed Jun 01, 2011 1:47 pm
Location: Brisbane, Australia

Postby cammag5 » Thu Sep 08, 2011 10:18 am

Sorry if this is a dumb question but what do you mean about the tuning can be done remotely via Merlin?

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Thu Sep 08, 2011 10:18 am

cammag5 wrote:I would really like a full exhaust, air intake and ECU tune/upgrade and then at some stage get it lowered


i would order exhuast and K&N panel from MAP in US

get RA intake from ofey

and tune from Merlin

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Thu Sep 08, 2011 10:22 am

what suburb are u in Cam?

springs arent too hard if u have a jack and a socket set, u may/may not need a rattle gun which can be hired, an electric one, bout $40 half day.
takes about 2 hours i guess.
youll need a wheel alignment after it imo.

tune and intake u can take ofeys advice.

u can talk to us sat. night at the photoshoot if u wish :)
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Sep 08, 2011 10:25 am

Merlin is a member of this site who wrote the tuning guide which is extensively used by open source tuners.

You will need a couple of things to get your car tuned via Merlin.

1. Join as a premium member. Even if you don't, Merlin charges you A$40 more (which in truth is a premium membership). The cost of remote tuning is A$200 I think.


2. You will need to purchase a Tactrix Cable. That's also about A$200 delivered. This will allow you to log your car's performance when driving. It will also allow you to read your ROM and flash it back once Merlin tweaks it.

and

3. You will need to be willing to do power runs on the freeway. A power run is usually done in 3rd gear (in CVTs, you can also do this by switching to sports mode) and going wide open throttle on a flat straight stretch of road. This is done till the car sounds like it needs you to shift.

The Tactrix cable will log all your data and you send this file to Merlin thus the remote logging idea. He will then be able to tweak your ROM file to tune your car.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
cammag5
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Wed Jun 01, 2011 1:47 pm
Location: Brisbane, Australia

Postby cammag5 » Thu Sep 08, 2011 10:27 am

Yeah ill have a talk to you guys about it Saturday night :)

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Sep 08, 2011 10:29 am

I might add that its best for you to make all the changes to your drivetrain first before you get a tune done.

No point tuning to the parts now on, then when it changes, your tune doesn't consider all the improvements.

For e.g. the air intake using the stock intake snorkel is NOT the same as using a RA snorkel.

If you have a performance muffler such as the GReddy, it's more free flowing than the stock muffler.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
cammag5
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Wed Jun 01, 2011 1:47 pm
Location: Brisbane, Australia

Postby cammag5 » Thu Sep 08, 2011 11:37 am

Thanks for the tips :)

Does any one know where i can pick up a K&N panel air filter for the VRX?
And how much are they?

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Thu Sep 08, 2011 12:42 pm

repco, autobarn, supercheap

or online from US stores like lancershop, MAP

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Sep 08, 2011 12:47 pm

Buy your K&N online.

I think its A$90 delivered online.
If you walk into any of the local auto shops, it's closer to A$120.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
cammag5
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Wed Jun 01, 2011 1:47 pm
Location: Brisbane, Australia

Postby cammag5 » Thu Sep 08, 2011 12:55 pm

the local repco and supercheap let me down good old autobarn had one left and yeah it was $120 but worth it cause i really wanted it today :)

Ofey ill have to get you to send me that RA snorkel, the local Mitsubishi dealer wanted nearly $190 and it was going to take almost 3 weeks to get it in!


Return to “Western Australia”

Who is online

Users browsing this forum: No registered users and 174 guests