***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

New Member - Perth - Ravi

Please Introduce Yourself Here.

Moderators: Moderators, Senior Moderators

User avatar
alterego13
Lancer VR/GT
Lancer VR/GT
Posts: 293
Joined: Mon Aug 01, 2011 5:47 pm
Location: Perth, Australia

Postby alterego13 » Thu Aug 11, 2011 1:26 pm

Alileighju wrote:Yes, pit dealers against each other. And price should be your only concern. Who cares about customer service. You are there for one reason only, to buy a car for a cheap as possible. Often the dealers will try and befriend you or loop you in emotionally. Ignore all that and focus on the price only. This may sound harsh but I went through the exact same scenario at the beginning of this year and I look back and think how much of an idiot I was getting convinced of their lowest price. You can always go lower. I went from 31000 for my VRX down to 27500.


Thats good haggling I must say.
With regards to 'be-friending' or emotional blackmailing(if may use that word) the worst I've heard so far...from a very young sales guy is...'I'm pretty sure you're not going to come back' !! LOL

User avatar
alterego13
Lancer VR/GT
Lancer VR/GT
Posts: 293
Joined: Mon Aug 01, 2011 5:47 pm
Location: Perth, Australia

Postby alterego13 » Thu Aug 11, 2011 9:33 pm

Just signed on the dotted line!! woohooo!!
Car delivery expected next Thursday.
Inclusions : Illuminated foot lights, mats, bonnet protector, weathershields x2, full tank of fuel. Will share the price once I get the delivery :)
Thanks Guys for all your inputs.

User avatar
gerrys
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Sun Aug 07, 2011 3:07 pm
Location: Perth, Australia

Postby gerrys » Thu Aug 11, 2011 9:36 pm

alterego13 wrote:Just signed on the dotted line!! woohooo!! Car delivery expected next Thursday. Inclusions : Illuminated foot lights, mats, bonnet protector, weathershields x2, full tank of fuel. Will share the price once I get the delivery :) Thanks Guys for all your inputs.


Where did you get the car from?

Cheers
Gerry

User avatar
Alileighju
Lancer Evolution
Lancer Evolution
Posts: 816
Joined: Sun Dec 26, 2010 12:51 am
Location: Brisbane, QLD, Australia

Postby Alileighju » Thu Aug 11, 2011 9:38 pm

Congratulations Ravi!

Show us pics when you get it!

User avatar
alterego13
Lancer VR/GT
Lancer VR/GT
Posts: 293
Joined: Mon Aug 01, 2011 5:47 pm
Location: Perth, Australia

Postby alterego13 » Thu Aug 11, 2011 10:41 pm

Where did you get the car from? Cheers Gerry

Wanneroo Mitsu.

Edit: Still learning the 'quotes' :)
Last edited by alterego13 on Sat Aug 13, 2011 10:01 pm, edited 1 time in total.

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Sat Aug 13, 2011 6:27 pm

(WTTC)

... :shock: ... looks like you've gotten plenty love from the WA crew. :lol:

so, there is not much more for me to say, other than, Congrats on the ewn car.

I bet the final few days wait prior to pick up is going to be the worst. :)

Good luck and make sure you check everything works, every button, gadget, door, no dents or panel deformations, any odd paintwork damage or orange peeling effect, etc. If there is something not quite right, check another Lancer in the yard to make sure it's normal or not. If it's not, note it on the report before signing so they can sort it out on the first 1,500km complimentary service.
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
alterego13
Lancer VR/GT
Lancer VR/GT
Posts: 293
Joined: Mon Aug 01, 2011 5:47 pm
Location: Perth, Australia

Postby alterego13 » Sat Aug 13, 2011 10:06 pm

VRX_Pete wrote:(WTTC) ... :shock: ... looks like youve gotten plenty love from the WA crew. :lol: so, there is not much more for me to say, other than, Congrats on the ewn car. I bet the final few days wait prior to pick up is going to be the worst. :) Good luck and make sure you check everything works, every button, gadget, door, no dents or panel deformations, any odd paintwork damage or orange peeling effect, etc. If there is something not quite right, check another Lancer in the yard to make sure its normal or not. If its not, note it on the report before signing so they can sort it out on the first 1,500km complimentary service.


Well..there's never too much 'love' ;) so keep it comin
Thanks for the advise Pete, I haven't seen the car in the yard because it was still in Mitsubishi's hold...will be at the dealer on wednesday or so... But yes I've made a list of things to check before taking delivery. The wait is unbearable though! *mad2*
Hopefully next weekend I'll have photos up for ya'll to see.. :)
First things and probably the only things on my mind re. mod are..'blackout bumper' and Steel look around front grill.
Lets see how it goes.

User avatar
alterego13
Lancer VR/GT
Lancer VR/GT
Posts: 293
Joined: Mon Aug 01, 2011 5:47 pm
Location: Perth, Australia

Postby alterego13 » Tue Sep 06, 2011 3:20 pm

Picked up my shiny new Lancer yesterday (finally!!)
Effect Grey SX Manual MY11(08/11)
Illuminated floor lights, mats, bonnet protector and weathershields.
full tank of fuel and 12months rego. for $19,200.
Soooo happpy!!
Pics coming soon :)

User avatar
Alileighju
Lancer Evolution
Lancer Evolution
Posts: 816
Joined: Sun Dec 26, 2010 12:51 am
Location: Brisbane, QLD, Australia

Postby Alileighju » Tue Sep 06, 2011 6:04 pm

Congratulations Ravi! Very good price too I must say!

User avatar
alterego13
Lancer VR/GT
Lancer VR/GT
Posts: 293
Joined: Mon Aug 01, 2011 5:47 pm
Location: Perth, Australia

Postby alterego13 » Tue Sep 06, 2011 7:05 pm

Alileighju wrote:Congratulations Ravi! Very good price too I must say!

Thanks Ali,
Yes very good price..I could've done better but I got greedy :mrgreen: and included the extras i.e. floor lights, bonnet protector, weathershield..which pushed the price up, but anyhoo..I'm still very very happy with it. :)

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Tue Sep 13, 2011 7:32 pm

alterego13 wrote:Picked up my shiny new Lancer yesterday (finally!!)

congrats! now to get some mods on her!!! :twisted:
"the quieter you become, the more you are able to hear"

More pix @ http://clubcj.net/viewtopic.php?t=8779

ImageImage

User avatar
alterego13
Lancer VR/GT
Lancer VR/GT
Posts: 293
Joined: Mon Aug 01, 2011 5:47 pm
Location: Perth, Australia

Postby alterego13 » Mon Sep 19, 2011 6:25 pm

congrats! now to get some mods on her!!! Twisted Evil

Yep..just got the black vinyl and chrome moulding...!
other mods..i m not too sure.. maybe a k&n filter..some cosmetic add-ons....but no performance mods...nope..not for me :)

User avatar
lancervr
Lancer MASTER
Lancer MASTER
Posts: 1923
Joined: Sat Oct 17, 2009 2:26 am
Location: WA,Australia

Postby lancervr » Mon Sep 19, 2011 6:29 pm

Make ureself of the list of mods u want after some looking around the forum then do some research on the net for those parts to get the best price... :) thats what i did with my car and got most of em dirt cheap....
Image

~LancerVR~
Your friendly neighbourhood Red Devil (cj-red)

User avatar
Eman014
Lancer ES/EX
Lancer ES/EX
Posts: 122
Joined: Fri Dec 24, 2010 12:13 am
Location: Perth

Postby Eman014 » Mon Sep 19, 2011 6:36 pm

alterego13 wrote:[quote:74394979d1]congrats! now to get some mods on her!!! Twisted Evil [/quote:74394979d1] Yep..just got the black vinyl and chrome moulding...!


Hey Ravi just wonder where you got the black vinyl done?

User avatar
alterego13
Lancer VR/GT
Lancer VR/GT
Posts: 293
Joined: Mon Aug 01, 2011 5:47 pm
Location: Perth, Australia

Postby alterego13 » Mon Sep 19, 2011 7:08 pm

@Rahul,
Yes thats the plan. Looking around...what I'd like... and the list growing by the minute!! *eek*

@Eman,
I haven't got it done yet. going to be a D.I.Y. job. I just got the vinyl from a signwriter near my work(wangara) during lunch break :D got it for $15 should be enough for 2 attempts :P

A place tried to sell me the vinyl for $50 *faint2* (it was 3M controltac) tried to talk me into getting him to install it for me..and he wanted $110 for it!!


Return to “NEW MEMBERS”

Who is online

Users browsing this forum: No registered users and 313 guests