***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
NetGX
Lancer Newbie
Lancer Newbie
Posts: 25
Joined: Sat Aug 01, 2009 10:21 pm
Location: Newcastle, Australia

Postby NetGX » Mon Aug 15, 2011 9:35 pm

I'm currently in need of some help, a while ago I replaced my battery with an optima yellow top, the terminals were on the far side and the factory terminal wouldn't reach. In the process of trying to move the original terminal one of the built in fuses cracked and I had to buy a 3rd party distribution block.

I'd really like to buy another original terminal with the inbuilt fuses but I have no idea about the part number or where to get it. HELPPPPP

Image

User avatar
NetGX
Lancer Newbie
Lancer Newbie
Posts: 25
Joined: Sat Aug 01, 2009 10:21 pm
Location: Newcastle, Australia

Postby NetGX » Mon Aug 15, 2011 9:37 pm

similar event here http://www.evoxforums.com/forums/showthread.php?t=13985

edit: found the part in this diagram (part number 4) http://www.evoxforums.com/forums/showthread.php?t=30337

I can't find anywhere to buy in Aus though

User avatar
big_d
Lancer VR/GT
Lancer VR/GT
Posts: 211
Joined: Fri Jun 18, 2010 9:00 am
Location: Wellington, New Zealand
Contact:

Postby big_d » Fri Aug 19, 2011 8:52 am

Can someone tell me if the factory Ralliart or Evo X radiator shroud has a scoop on the air intake port like the aftermarket one below?

Image

Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Aug 19, 2011 9:13 am

No it doesn't

Your aftermarket one has a scoop like action.
The stock one blocks it off strangely enough.

Don't attempt to fit the radiator cover on a NA car. Your Hood does not have an indentation to accomodate the top intercooler pipe bump, thereby resulting in your hood being unable to close properly
Last edited by ofey on Tue Aug 23, 2011 9:56 am, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
klvru
Lancer VR/GT
Lancer VR/GT
Posts: 253
Joined: Sat Jul 23, 2011 12:46 am
Location: Brisbane

Postby klvru » Mon Aug 22, 2011 5:01 pm

Hi Ofey,

Would like to get this MI-8065A039XA COVER-STRING COLUMN-LWR(BLACK) . Sent you a pm

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 22, 2011 5:02 pm

klvru: Replied
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 22, 2011 5:08 pm

@NetGX:

The part you're after is:

8571A003 Box ASSY-FUSIBLE LINK
RRP=A$44.80
CCJ=A$42.00
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
tencents
Lancer Ralliart
Lancer Ralliart
Posts: 587
Joined: Wed Aug 17, 2011 6:26 pm
Location: Sydney, Australia

Postby tencents » Mon Aug 22, 2011 7:50 pm

bought touch up paint MZ103117 PAINT-L/BLUE(P)-(HT/D06) at Mitsubishi for $13.95 before finding here is only $10. Now i know where to get it next time.
- GST basemap
- AMS boostpill
- Works High flow drop in air filter
- Evo X BPV
- UR UICP
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Aug 22, 2011 7:52 pm

Postage would have killed off any savings though.

You need to buy a couple of things to make your postage worthwhile.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

lasinchan
INACTIVE Member Account
Posts: 2
Joined: Thu Aug 18, 2011 10:07 pm
Location: Kuala Lumpur, Malaysia

Postby lasinchan » Mon Aug 22, 2011 10:19 pm

Hi,

I'm interested on a couple parts as per below. Is any international shipping provided? Do you accept paypal payment? Thanks.

MZ314070 - CF Insert Heat (Standard)
RRP=A$74.3+
CCJ= A$65.00

7030A105XA MODULE-AIR BAG (Steering Wheel)
RRP= A$774+
CCJ= A$715

3. RA Logo CVT/SST-> MZ360274EX CARPET MAT SET RA Mark
RRP = A$88.90+
CCJ = A$82.00
Lancer Newbie

User avatar
sleepy
Lancer VR/GT
Lancer VR/GT
Posts: 255
Joined: Fri Jul 29, 2011 6:28 pm
Location: Sydney, Australia

Postby sleepy » Tue Aug 23, 2011 9:38 pm

Question:

Front Air Dams
6512A164XA Panel Air Dam Skirt RH-C-Black
RRP= A$174+ each
CCJ=A$145 each

AND

VRX/Aspire Front Air Dams (aka front fangs)
MU6512A163BC (Comes color coded Part # refers to Blue set)
RRP= A$174.00+
CCJ=A$150.00
(You need 2 obviously so count it as A$300.00)

What are the differences? is the first one only for the Aspire/Olympic Ed? And before you tell me to go to x-factor, I've sent Shadows/their sales team an email earlier today and am just awaiting a reply.

I'm also skeptical about having things shipped overseas. Never done it before, I prefer to have things shipped within Australia.. lol

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Aug 23, 2011 10:10 pm

There's no difference in the parts except the color.

Strangely enough the Blue ones are more expensive.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Aug 24, 2011 4:53 pm

Always good to get a thank you PM

dectwo wrote:Hey man I would just like to say thank you for helping me get the badge!

Just recieved it in the mail. Appreciate it.

-T
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Meaty
Lancer Evolution
Lancer Evolution
Posts: 978
Joined: Wed Nov 10, 2010 4:30 pm
Location: Melbourne Australia

Postby Meaty » Sun Sep 04, 2011 8:33 pm

Irving, can you Please order me in :

3. MR935658 - Headlamp protectors
RRP= A$70+
CCJ= A$55.00


Also a X42 Touch up paint please.


let me know when you want me to transfer the funds.

Thanks.
Image

User avatar
washman
Lancer ES/EX
Lancer ES/EX
Posts: 107
Joined: Fri Mar 11, 2011 7:55 pm
Location: Sydney

mud flaps

Postby washman » Sun Sep 11, 2011 5:39 pm

do u know if the talon vrx kit would fit with the mudflaps u have listed?


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 16 guests