What did you do on your car today?

Miss Aussie · Postby **Miss Aussie** » Tue Aug 09, 2011 10:39 pm

Got my windows tinted.
Nice dark (illegal) 20%

RyanMK · Postby **RyanMK** » Tue Aug 09, 2011 10:45 pm

Miss Aussie wrote:Got my windows tinted. Nice dark (illegal) 20%

Where did you get it done and for how much Caitlin?

I'm looking at getting mine tinted soon.

13EZY · Postby **13EZY** » Wed Aug 10, 2011 5:39 am

Sherman-08VRX wrote:Today i received my scorpion motorsport bracket for a side mounted license plate!!! Now i just need to find something to plug the gigantic holes that have been left behind?! suggestions??

i had Wrapture Styling vynil over the front of mine, after i filled the holes with some plastic

Tillllasam · Postby **Tillllasam** » Wed Aug 10, 2011 10:48 am

Meaty wrote:sam you should cut the 3 mm shiny bevel of the diamond free ......

I was thinking for covering the whole badge but I don't have the skill.
Maybe I will try to leave a small gap on the rear badge.

Miss Aussie wrote:Got my windows tinted. Nice dark (illegal) 20%

Picture please =)

13EZY wrote: i had Wrapture Styling vynil over the front of mine, after i filled the holes with some plastic

Awesome~!!! *becky*

Miss Aussie · Postby **Miss Aussie** » Wed Aug 10, 2011 7:39 pm

RyanMK wrote:Where did you get it done and for how much Caitlin? Im looking at getting mine tinted soon.

Hey Ryan,

Got it done at Auto Perfection on Main North Road (just down from Regency Road) at Enfield.

Just got the fronts to match the back for $99 but I think they do a whole car for $220.

I dunno, I may have gotten mates rates.

If you call them, ask for Rick, he did it for me

Tillllasam wrote: Picture please =)

For sure, just have to wait until It's light lol
I get home when it's getting dark

13EZY · Postby **13EZY** » Thu Aug 11, 2011 12:46 pm

Rob Bliss put a resonator on my new twin exhaust - was a bit loud

Pedders installed camber pins, reduced the front camber from neg 2 to neg 1 degree to save some tyres.
also raised the back by 10mm and dropped the front by 10mm

goatio · Postby **goatio** » Thu Aug 11, 2011 3:08 pm

new tires, federal 595 ss 235/40/18

Tillllasam · Postby **Tillllasam** » Thu Aug 11, 2011 6:55 pm

More CF vinyl for the interior.

Speechless.

Few days after I CF wrapped the crack on the trim, someone bumped into my car second times within two weeks. The crack pop out again. :evil:

Kimmy · Postby **Kimmy** » Fri Aug 12, 2011 4:38 pm

Today I had a wheel alignment and my tyres rotated

Postby **aspir3** » Fri Aug 12, 2011 4:44 pm

Today i fitted a new rear muffler. My exhaust now has a S bend before the rear muffler. The muffler is tucked up close to the under body, so it can only just be seen. The muffler is a straight through muffler with an expansion chamber. It now has a deeper sound to it.

goatio · Postby **goatio** » Fri Aug 12, 2011 5:23 pm

i put my new tires on federal 595 ss 235/40/18
balence & alighnment
cold old RA rims & tires to kelvin
good day all round

PYLee · Postby **PYLee** » Fri Aug 12, 2011 5:25 pm

I started my car for the first time in a month , loving the sound and smell of it :twisted:

Glenn · Postby **Glenn** » Fri Aug 12, 2011 5:46 pm

Finally finished (for now) my audio install

more pics in the members gallery section

ofey · Postby **ofey** » Fri Aug 12, 2011 6:27 pm

Got it washed at PMR's new drive through car wash p.s. thanks nick!

What a system!

Sorry I didn't have my camera with me but the system was similar to this. I'll take a video next time.

AND hoovered the insides when I got home... .

What did you do on your car today?

Who is online