Part out! Injen intake, HKS zorst, Informeter, Pivot 3drive

[JaCe]

ALL SOLD PENDING PAYMENT

Hi guys,

As you may be aware, I recently traded in my Evo X and had to return it back to stock beforehand. Currently I have the following parts for sale but am looking for buyers in SYDNEY only who are able to pick up these items from the Hills District. If there are no takers then I'll happily consider interstate buyers. I am not willing to sell individual components from the kits (e.g. a specific pipe within the intake kit or exhaust) as this makes the rest of the kit almost worthless!

1. Injen short-ram intake + upper intercooler piping kit - $250

* includes pod filter, heatshield, chrome piping for both intake and upper intercooler pipe as per the full kit
* full bolt on replacement to OEM airbox and UICP
* used for approximately 1 year / 15,000km's
* entire box/kit is able to fit inside boot of Evo X MR
* refer to pictures / video on Youtube for sound

[s]2. HKS Hi-Power catback exhaust - $450[/s]
SOLD! 24/12/2011

* full bolt on catback exhaust
* used for approximately 9 months / 12,000km's
* does not drone and looks epic
* pick-up from Hills District only (too large/difficult to carry back and forth but it is possible to fit inside an Evo X MR with seats pushed forward and boot emptied out)
* refer to pictures

WHEN COMBINED
- dyno proven to produce circa 200kW ATW when custom tuned; happy to provide dyno charts
- happy to sell together as a package for $600
- note that tune above was done by MRT and on their hub dyno, it read approximately 240kW

[s]3. GReddy Informeter Touch - $300[/s]
SOLD! 19/07/2011

* been used on car for approximately 1 year but I've kept it so new, I never took off the original screen protector (it still has the tab on it!)
* plug and play
* note that this uses the CANBUS/OBDII port to read boost; if you want it to be a 'real' boost gauge you need an optional sensor which I do not have
* refer to pictures / Videos on Youtube

4. Pivot 3Drive Flat throttle controller incl. Evo X throttle harness - $200

* offers 5 degrees of economy mode and 7 degrees of sports mode
* automatically disengages in reverse
* includes Evo X/CJ Lancer harness which means it's plug and play with throttle controller (WARNING I cannot guarantee it'll work on a CJ Lancer as I'm not experienced in this field- this is only want I was told when I bought it; but I can confirm it works 100% plug and play in the Evo X)
* I have removed the OBDII plug power source as I used the 12v cig lighter to power this

** also note that the Informeter Touch and Pivot 3Drive throttle controller may work in other vehicles (including non-Evos) but I cannot make any guarantees as I'm not experienced in this field. Buyer beware and do your own research if you want this in your <insert>.


BUYING CONDITIONS
If you wish to purchase any of the above items, I will require a non-refundable deposit of at least 10% to be received within 24 hours of us reaching an agreement. The reason I ask for this is because I've been stood up many times before and had to reject higher offers for various parts over the years, only to have no sale in the end!

Items are for pick up in Hills District only. For the exhaust, I recommend an empty car or a van/truck because the one-piece pipe is quite large and *just* fits in the back seat of an Evo X with the seats pushed forward, whilst the dual mufflers/cannons fit in the boot.

Thanks! Feel free to post here if you have q's.

[JaCe]

Photos coming soon- I currently have them on Imageshack but unfortunately that\'s blocked.

EDIT: PM me if you want me to send through pictures via PM because I really can\'t be bothered having to reupload everything to CCJ.

[migs_07]

would the injen intake fit a lancer NA?

[Chubb]

PM sent about the GReddy Jace .

[JaCe]

would the injen intake fit a lancer NA?

Pretty sure it's a no. Even the Ralliart would have difficulty considering the intake box is where the battery is located in non-Evo's.

PM sent about the GReddy Jace .

Thanks- post updated.

[JaCe]

bump! willing to negotiate on intake/exhaust if anyone in sydney is interested!

[chris851]

Still have the 3 Drive have sent PM

[klvru]

Interested in the pivot 3 drive, but I'm having a NA lancer. Anyone from sydney could test if it works?

[JaCe]

Hi guys, sorry I've disappeared for a while with work and all- the Pivot 3Drive including plug and play harness is still good for $270 ONO.

AFAIK it should be plug and play with all CJ Lancers and the install is a matter of plugging the harness cable between throttle connector and the original plug. The only challenge (depending on your level of skills) is hooking up the 12v power source to your cig lighter or tapping any other power source.

Cheers guys. Sorry again for delayed response- flat out with work and totally forgot about this thread. Thanks to Nathan for emailing me!

[JaCe]

For anyone based in Sydney please make me an offer! I'm really holding out on shipping interstate since even transporting the exhaust parts is quite a hassle.

[LZY_EYE]

The exhaust will not bolt straight on, and I believe the tips are a different width.

An exhaust shop would be able to modify to fit though, it sounds awesome

[JaCe]

The intake/exhaust are still up for grabs to Sydneysiders!

[JaCe]

Anyone up for the throttle controller? If you're in Sydney and we can arrange a mutually good time, and are good with your parts, I'm happy to let you try it in your car and see if it's all plug and play with the throttle harness- this is subject to my availability and me agreeing to let you muck around with it!

Price reduced to $200.