***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

problem with adjustable air vents

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Sat Jul 09, 2011 10:48 pm

I have an MY09 it was built September 2008 and the vents are fine no loose ones that I have noticed.... 8)
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Sat Jul 09, 2011 10:52 pm

milobob wrote:Oh man... I have an MY09... but.. I leave my vents open... :P and mostly to my hands because they are eitehr frozen or sweating...

That is what I do and they still end up pointing up. Its not about where you like to keep them, its just about them being loose in general for some people.

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Sun Jul 10, 2011 8:31 am

LIST:

DOES:

sleeper
jake
julian
aaron
slash
naheen
rob
pete
driftnut

DOESNT, MAY RECONSIDER AFTER EXTENSIVE ROADS TRIALS:

matt
doreen
irving
leez
andrew
chris
sharyn
shaine
juan
anzac_77
coolwave911
meaty
blackbetty
Last edited by sleeper on Wed Jul 13, 2011 10:22 pm, edited 3 times in total.
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Sun Jul 10, 2011 8:32 am

i`ll check mine out today at the workshop day if i get time
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
lena91
Lancer MASTER
Lancer MASTER
Posts: 1510
Joined: Tue May 24, 2011 4:27 pm
Location: Albany,WA

Postby lena91 » Sun Jul 10, 2011 10:36 pm

Checked mine out on the road today, mine dont but we shall see as the car gets older :)

User avatar
shaine
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Wed Mar 09, 2011 7:54 pm
Location: Brisbane Australia

Postby shaine » Sun Jul 10, 2011 10:58 pm

I checked mine today, 09, no probs
ENJOY!! (cj-black)

User avatar
shaine
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Wed Mar 09, 2011 7:54 pm
Location: Brisbane Australia

Postby shaine » Sun Jul 10, 2011 11:17 pm

Could it just be a wear thing? I never move mine as i rarely use A/C, so im thinking maybe some are still nice and tight, where as some people may move theirs more often and loosen them...???
ENJOY!! (cj-black)

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Sun Jul 10, 2011 11:43 pm

Apparently Steve said that they tested a couple of new cars on the lot and they did it too... So now they refuse to fix it...

I don't understand why you wouldn't just go to the MTA, or whatever the equivalent in QLD is.

User avatar
shaine
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Wed Mar 09, 2011 7:54 pm
Location: Brisbane Australia

Postby shaine » Mon Jul 11, 2011 12:05 am

Oh yeah he did mention that lol... there goes my theory *facepalm*
ENJOY!! (cj-black)

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Mon Jul 11, 2011 12:39 am

I video'd what steve was mentioning doesn't really bother me I never close my vents

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Mon Jul 11, 2011 6:37 am

might just do that shane, just getting a better picture of the extent of the problem atm.
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
anzac_77
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 321
Joined: Sun Jan 02, 2011 7:04 pm
Location: Brisbane

Postby anzac_77 » Mon Jul 11, 2011 8:51 am

Hey Steve, yesterday i did a bit of driving and paid particular attention to my vents, they are solid as a rock (2010 build MY11 SX).
It might have been a batch issue, i had some different annoying problems in my first month with the car (seat belt lockup, air con died after 3 weeks), both were apparently a batch issue which affected quite a few buy not all cars.
It could be an idea for people to provide build-dates if they have the same problem, it could help narrow down affected cars. Just a thought.

User avatar
Slash
Lancer Ralliart
Lancer Ralliart
Posts: 651
Joined: Tue May 17, 2011 3:07 pm
Location: Sydney

Postby Slash » Mon Jul 11, 2011 9:19 am

Called McGraths Liverpool this morning, where I bought the car from.
Advised them of the issues with my vents (passenger side vent has an different issue).. booked in for this thursday to have it looked at, will keep you updated.

User avatar
coolwave911
Lancer Newbie
Lancer Newbie
Posts: 72
Joined: Sat Apr 16, 2011 12:13 am
Location: Sydney, Australia

Postby coolwave911 » Mon Jul 11, 2011 11:43 am

Not happening on mine at all ever since I got the car

75,000Km MY08 ES

Drove all the way from TAS to NSW no problem noticed so mine can be listed as extensive road tested hehehe


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 75 guests