***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

QLD bellthorpe cruise SATURDAY 26/03.

Local QLD State News, Meets, Cruises, Information & Talk.

Moderators: Moderators, Senior Moderators

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Fri Mar 04, 2011 6:00 am

thats not too bad a route pete, how bout we move D and E across to steve irwin way and come into the glasshouses that way, going through beerwah, i dont particularly want to drive through caboolture, too many cops with bad attitudes :)

i`m not sure which is the better road, old gympie rd or steve irwin way?

of course we can turn off before caboolture :)
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
Tarquin
Lancer Legend
Lancer Legend
Posts: 1015
Joined: Wed Sep 03, 2008 8:54 am
Location: BrisVegas, QLD, Australia

Postby Tarquin » Fri Mar 04, 2011 10:33 pm

Less cars on Old Gympie Rd, and a bit more entertaining than Steve Irwin Way....

You don't really end up going into Caboolture - as you can cut back out to the Bruce via D'Aguilar Hwy.... Beerburrum road is also a good one....

I've been in Morayfield now for a bout 2 years and haven't had an issue with the local boys in blue..... you must be hooning Steve..... :P

Route Revision
Last edited by Tarquin on Fri Mar 04, 2011 10:41 pm, edited 1 time in total.
- CCJ Premium Member #0015.
Image
Tarq's Paintshop

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Fri Mar 04, 2011 10:38 pm

yeah, i see the advantage of less traffic, we will ponder, have u done the roads between eudlo road and maloolah connection road?
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
Tarquin
Lancer Legend
Lancer Legend
Posts: 1015
Joined: Wed Sep 03, 2008 8:54 am
Location: BrisVegas, QLD, Australia

Postby Tarquin » Fri Mar 04, 2011 10:46 pm

sleeper wrote:yeah, i see the advantage of less traffic, we will ponder, have u done the roads between eudlo road and maloolah connection road?


Yes - they're all quite nice there... There's a good loop from Eudlo over Highlands Rd and back to Mooloolah via Neill Rd.

If you head down the Connection Rd from there, I usually turn off onto Tunnel Ridge Road instead and end up in Landborough....

Plenty of options..... :P
- CCJ Premium Member #0015.

Image

Tarq's Paintshop

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Fri Mar 04, 2011 10:52 pm

we only need 1 option, the best one :)

we can make this run lovely :)
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
Aaron2550
Lancer ES/EX
Lancer ES/EX
Posts: 199
Joined: Wed Mar 02, 2011 9:43 pm
Location: Brisbane

Postby Aaron2550 » Sat Mar 05, 2011 9:34 pm

Its a bit too far out of my way to go, if there is one on the south side I'll porb go, seem fun. Question, do you have any track days? I'm not sure if you can even take your car out on the track I heard you need to have a roll cage and big enough brakes to have go.

I would like to take my car out but fwd isn't too fun in the corners, just wondering if those who have evo's or RA's have a go.

User avatar
jerryme
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Wed Nov 03, 2010 10:37 am
Location: Brisbane, Australia

Postby jerryme » Sat Mar 05, 2011 10:31 pm

The club goes to willowbank occasionally.
Nothing stopping you going to QR and have some sprints or do some motorkhana.

User avatar
Aaron2550
Lancer ES/EX
Lancer ES/EX
Posts: 199
Joined: Wed Mar 02, 2011 9:43 pm
Location: Brisbane

Postby Aaron2550 » Sat Mar 05, 2011 10:33 pm

Have you taken your lancer out for a run there?

User avatar
jerryme
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Wed Nov 03, 2010 10:37 am
Location: Brisbane, Australia

Postby jerryme » Sat Mar 05, 2011 10:35 pm

Nah I haven't but when I can afford it I would. Motorkhana would be fun in our lancers. If you did it, I'd bring a set of spares

User avatar
Aaron2550
Lancer ES/EX
Lancer ES/EX
Posts: 199
Joined: Wed Mar 02, 2011 9:43 pm
Location: Brisbane

Postby Aaron2550 » Sat Mar 05, 2011 10:39 pm

Yeah I just got new tyres on my car, don't wanna hurt them lol
but I would be keen to have a go, how much does it cost?

User avatar
jerryme
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Wed Nov 03, 2010 10:37 am
Location: Brisbane, Australia

Postby jerryme » Sat Mar 05, 2011 10:44 pm

Umm I think you have to get your Cams license. After that I think around $150 but don't quote me for sure.

User avatar
Aaron2550
Lancer ES/EX
Lancer ES/EX
Posts: 199
Joined: Wed Mar 02, 2011 9:43 pm
Location: Brisbane

Postby Aaron2550 » Sat Mar 05, 2011 10:58 pm

Cool thanks, I'll do a bit of research.

User avatar
13EZY
Lancer Legend
Lancer Legend
Posts: 1063
Joined: Sun Oct 24, 2010 7:50 am
Location: Brisbane, Oz

Postby 13EZY » Sun Mar 06, 2011 11:51 am

aaahhhh but a mere fortnight to go!!!!
can't wait
"That's page 1, chapter 1 of the petrosexual handbook"
(Lord Clarkson - Series 17 Episode 1)
Image
Ride Of The Month June 2011

User avatar
Flying Ace
Lancer Newbie
Lancer Newbie
Posts: 69
Joined: Thu Oct 14, 2010 4:26 pm
Location: Sunshine Coast, QLD, Australia

Postby Flying Ace » Tue Mar 08, 2011 6:29 am

I'm a maybe, just have to find out if I'm working first :)

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Tue Mar 08, 2011 10:49 am

cool ash, you will enjoy it, everyones friendly, especially to newbs.

we have a hoot :)

let me know when u are a definite and whether i have to cater for u .
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image


Return to “Queensland”

Who is online

Users browsing this forum: No registered users and 7 guests