ITEM: Autoloker DRLs - Silver A31
LOCATION: Brisbane - will post worldwide
ITEM CONDITION: Brand new
REASON FOR SELLING: Dummy fitted these and don't really like them. Kind of attached to my current DRL setup.
PRICE AND PAYMENT CONDITIONS: Paid $170 + domestic shipping for these. Looking to sell them for $90 + post. Make me an offer though, I just want to get rid of them ASAP. Payment by Direct Debit or Paypal in AU ... Paypal only for international.
SHIPPING AND POSTAL ARRANGEMENTS: Will post worldwide. Estimate shipping to AU @ $15, $25 to the rest of the world.
EXTRA INFO: I'm listing these on here and 9glancers for about a week. If they don't sell I'll put them on eBay.
CONTACT INFO: PM here or email draevon@hotmail.com.
PICTURES:
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
FS: Autoloker DRLs (Silver - A31)
Moderators: Moderators, Senior Moderators
FS: Autoloker DRLs (Silver - A31)
.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
Not entirely sure how to describe that ... They're decently bright. Not DRL ADR type brightness, but the're brighter than the led DRLs I bought from eBay .... so let's say ..... Medium?
Last edited by draevon on Tue Feb 15, 2011 8:50 pm, edited 1 time in total.
.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
They're not bad, they just didn't grab me when I put them on the car. I've gotten a few compliments on my current fog/DRL setup over at 9glancers which kind of got me thinking. I already have one semi bright LED setup, so it seemed kind of a weird choice to swap it for another that didn't grab me straight away when I test fitted them.
I've also installed an Injen CAI in the meantime since originally ordering these guys, and was a bit reluctant to install these lights and alter the airflow considering my air filter now sits directly behind this area. There is a filter cutout in the DRLS, but it's slightly smaller than the original Fog light/grille opening.
So plans have kind of changed. I've already ordered myself a set of 8000K H11 hids to run on my foglights, wired up to my current DRL circuit.
I've also installed an Injen CAI in the meantime since originally ordering these guys, and was a bit reluctant to install these lights and alter the airflow considering my air filter now sits directly behind this area. There is a filter cutout in the DRLS, but it's slightly smaller than the original Fog light/grille opening.
So plans have kind of changed. I've already ordered myself a set of 8000K H11 hids to run on my foglights, wired up to my current DRL circuit.
.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
- foreshadow
- Lancer Newbie
- Posts: 97
- Joined: Wed Oct 06, 2010 8:36 pm
- Location: Sydney, Australia
As someone who recently got there russian DRL i thought i'd comment on my experiences with mine. This is no indication of the quality of these particular ones for sale, just mine.
Basically i was very disapointed with mine. On fitting, the front right fitted reasonable, leaving afew mm gap around the endges. the left side was a terrible fit, with a large gap along the bottom on the DRL, and the DRL popping out of the cavity on the wheel arc side.
The other main problem i found is there is no anchor point on the DRL's to secure them. There basically constructed of a few mm of plastic, with an LED strip mounted within it, zero anchor points. The only way ive worked out how to secure them is drill through your DRL with a screw / self tapper into the existing bracket (Ruins the look) or glue on some type of bracket (no easy to do and time consuming)
Just my 2c
Basically i was very disapointed with mine. On fitting, the front right fitted reasonable, leaving afew mm gap around the endges. the left side was a terrible fit, with a large gap along the bottom on the DRL, and the DRL popping out of the cavity on the wheel arc side.
The other main problem i found is there is no anchor point on the DRL's to secure them. There basically constructed of a few mm of plastic, with an LED strip mounted within it, zero anchor points. The only way ive worked out how to secure them is drill through your DRL with a screw / self tapper into the existing bracket (Ruins the look) or glue on some type of bracket (no easy to do and time consuming)
Just my 2c
These are now on eBay. PM me if you have any questions. Mods, may as well lock this up please:
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0515049287
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0515049287
.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
Who is online
Users browsing this forum: No registered users and 31 guests