meaty wrote:so when is the third parcel arriving ......
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Russian Website Parts Auto-loker GB
Moderator: Senior Moderators
- DORA_ANNE
- Lancer MASTER
- Posts: 2253
- Joined: Fri Jan 01, 2010 8:07 pm
- Location: Northern Rivers NSW AUSTRALIA
meaty wrote:well im glad everyone is happy that they are getting their parts, all im wondering is where are my DRL's and is someone going to answer my question?meaty wrote:so when is the third parcel arriving ......
Hi Tate , Iam Pretty sure That the third parcel is getting sorted By Ofey ...If you look back onto page 24 on this thread Ofey Did explain that the Third parcel is still in Progress ... I Know Ofey is doing his Best to get it sorted for everyone ..Hope this Helps .
Regards Doreen
Angels Are Sometimes Disguised As Friends
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I still don't have the 3rd parcel.
Can I just point out here that I had your parts sent back as Nick and I found them to be defective.
I suspect in future, I will just deliver whatever gets sent and people can settle their own problems.
Not being rude but I think it's the lesser of 2 evils rather than getting probed from time to time about arrival dates.
Can I just point out here that I had your parts sent back as Nick and I found them to be defective.
I suspect in future, I will just deliver whatever gets sent and people can settle their own problems.
Not being rude but I think it's the lesser of 2 evils rather than getting probed from time to time about arrival dates.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I hope everyone realises, that I have my own life.
I update when I can.
After close to A$50K+ of sales passing through my hand. NO ONE, I repeat NO ONE has been shortchanged by me.
If I don't say anything means I have NOTHING to update.
Asking me for one, doesn't help, I still don't have anything to say.
I update when I can.
After close to A$50K+ of sales passing through my hand. NO ONE, I repeat NO ONE has been shortchanged by me.
If I don't say anything means I have NOTHING to update.
Asking me for one, doesn't help, I still don't have anything to say.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
In future I will be very sure to spell everything out clearly.
I recognise for now it's me, not updating you of the faults in your parts.
I am not writing this in response to you alone but so everyone is aware of my working procedure.
I recognise for now it's me, not updating you of the faults in your parts.
I am not writing this in response to you alone but so everyone is aware of my working procedure.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Has anyone installed their DRLs yet? I only had a quick look before gym, but this doesn't look like it's going to be the simple bolt in I was expecting. Looks a bit like I might have to cut a foglight bracket. Not too stoked about that. Anyone else got them in yet?
.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
there is a plastic section you can drill a screw into which will replace the current screw but all the necessary clips are not there. I would suggest then more screws. Look for more places you can use as a screw on point.
Both black wires to ground
and both red to the white with red stripes in the fuse box will make them function like DRLs.
That white wire with red stripes is ACC. So your DRLs will be on when the car is on.
Both black wires to ground
and both red to the white with red stripes in the fuse box will make them function like DRLs.
That white wire with red stripes is ACC. So your DRLs will be on when the car is on.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
I've got the wiring sorted and saw the one screw point. The back of the LED recess hits on one of the screw brackets for fog lights though. I'll have a better look at it tomorrow. I'm sure I'll figure something outwas just wondering if anyone else has them on yet. Especially anyone with factory fog lights.
.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 13 guests