Has anyone done this conversion yet?
Do you require anything else other than...
- Front bar Cover
- Upper and Lower Centre Grilles
- Fog Lamp Grilles
- Chrome Garnish
What about the lower splash guard that covers the bottom of the engine? Does the VRX one fit or do you require a RA one?
Also, do the stock VRX fog lamps line up with the RA fog lamp holes in the bumper?
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Ralliart front bumper
Moderators: Moderators, Senior Moderators
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
There's a post somewhere on this forum where I detailed all the parts you will be needing.
In addition to what you have listed, you will need:
1. The actual RA Fog lamps. They're NOT the same as the NA ones. The NA ones will NOT fit. Those are about A$250 each side.
2. Stone trays on the bottom. The NA ones do not fit. The RA ones are different.
I also don't know what you mean by front bar cover, I'm suspecting you mean the radiator cover on the top accesible from your engine bay? That you can keep the NA one.
I think the guy that sold me his, said the whole thing for him cost about A$2K to buy in terms of parts.
In addition to what you have listed, you will need:
1. The actual RA Fog lamps. They're NOT the same as the NA ones. The NA ones will NOT fit. Those are about A$250 each side.
2. Stone trays on the bottom. The NA ones do not fit. The RA ones are different.
I also don't know what you mean by front bar cover, I'm suspecting you mean the radiator cover on the top accesible from your engine bay? That you can keep the NA one.
I think the guy that sold me his, said the whole thing for him cost about A$2K to buy in terms of parts.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- RibbandsJM
- Lancer VR/GT
- Posts: 294
- Joined: Fri May 14, 2010 9:37 pm
- Location: Perth, Australia
Who is online
Users browsing this forum: No registered users and 52 guests