***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
What did you do on your car today?
Moderators: Moderators, Senior Moderators
Here are some pictures of my led's at night.
These are the white led's that are like drl's
And during the day.
This is how the car looks at night with the ignition on and the interior light on or when you press the button to unlock the doors.
This is my front foot wells when I open a door.
The boot.
These are the white led's that are like drl's
And during the day.
This is how the car looks at night with the ignition on and the interior light on or when you press the button to unlock the doors.
This is my front foot wells when I open a door.
The boot.
ordered TWM short shifter today and also the RPW pulley. get those installed in next few weeks.
also, sorry kimmy but i've shamelessly ripped off ur tail lights. should be arriving in the next week or so
also, sorry kimmy but i've shamelessly ripped off ur tail lights. should be arriving in the next week or so
"That's page 1, chapter 1 of the petrosexual handbook"
(Lord Clarkson - Series 17 Episode 1)
Ride Of The Month June 2011
(Lord Clarkson - Series 17 Episode 1)
Ride Of The Month June 2011
gave her a good clean. all ready and just waiting on the call for when my 20's show up
like metal/hardcore music? check out my band - http://www.facebook.com/IngridStarver
Today I received my dynamat so I finished my car.
I fitted dynamat to the roof of the car.I put the front seats back in and the dvd headrests look great now as all the wiring is hidden.
Here are some pictures. Enjoy.
Here is the dynamat on the ceiling. This was rather difficult as I removed the sunroof.
The roof with the new interior light installed.
Rear blue led footwells.
I fitted dynamat to the roof of the car.I put the front seats back in and the dvd headrests look great now as all the wiring is hidden.
Here are some pictures. Enjoy.
Here is the dynamat on the ceiling. This was rather difficult as I removed the sunroof.
The roof with the new interior light installed.
Rear blue led footwells.
Hi guys,
I've been on 3 weeks holidays and got inspired by a few DIYs and decided to paint my Engine Cover and Fuse box.
I went with a bit of a different paint scheme with the engine cover rather than paint it completely.....what do ya think???
This was my first real attempt of doing my own Modificatons
And here is the engine and fuse box together!!
I've been on 3 weeks holidays and got inspired by a few DIYs and decided to paint my Engine Cover and Fuse box.
I went with a bit of a different paint scheme with the engine cover rather than paint it completely.....what do ya think???
This was my first real attempt of doing my own Modificatons
And here is the engine and fuse box together!!
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
That's Fabulous work lamn8tr. Come back to Melbourne soon! I think Nick misses you dearly!!
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Here is a bit more dynamat.
Right rear quarter panel
Left rear quarter panel
The inside of my Rockford sub.
I also remove the active light switch and fitted the coin holder. It is more useful and I have never turned the active lights off anyway.
Here is a picture of the car at night with all the lights on.
Right rear quarter panel
Left rear quarter panel
The inside of my Rockford sub.
I also remove the active light switch and fitted the coin holder. It is more useful and I have never turned the active lights off anyway.
Here is a picture of the car at night with all the lights on.
- scraverX
- Lancer MASTER
- Posts: 1590
- Joined: Fri Oct 30, 2009 8:12 am
- Location: Canberra, Australia
- Contact:
Tweaked the stereo even more after Tuesday.
Sounding real nice now but still getting used to the fact it now sounds like the subs aren't in the boot.
@troy: I didn't know the factory sub box split in half... looks kinda icky. No wonder it flexes so much.
I'd be running a bead of silicone before putting it back together, and possibly giving the inside a coat or two of FG Resin to make sure it's sealed up tight.
Sounding real nice now but still getting used to the fact it now sounds like the subs aren't in the boot.
@troy: I didn't know the factory sub box split in half... looks kinda icky. No wonder it flexes so much.
I'd be running a bead of silicone before putting it back together, and possibly giving the inside a coat or two of FG Resin to make sure it's sealed up tight.
"Max" 2009 MY10 RX, Black. CCJ Lifetime Premium Member #0125
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG
Car & Home audio nut.
Car audio brands used: Audison, Eclipse, Hybrid Audio Technology, Precision Power, Polk Audio, Pioneer PRS
Home Audio: Denon, Epos, Pro`ject, AKG
- ripflare10
- Lancer VRX/GTS
- Posts: 499
- Joined: Thu Dec 30, 2010 7:36 pm
- Location: Kuraby, Queensland
- Contact:
lamn8tr wrote:Hi guys,
I've been on 3 weeks holidays and got inspired by a few DIYs and decided to paint my Engine Cover and Fuse box.
I went with a bit of a different paint scheme with the engine cover rather than paint it completely.....what do ya think???
This was my first real attempt of doing my own Modificatons
And here is the engine and fuse box together!!
WOW!!!! My jaw actually dropped when I saw the pictures..That looks incredibly Awesome!
aspir3 wrote:Here is a bit more dynamat.
Right rear quarter panel
Left rear quarter panel
The inside of my Rockford sub.
I also remove the active light switch and fitted the coin holder. It is more useful and I have never turned the active lights off anyway.
Here is a picture of the car at night with all the lights on.
My gosh you have been busy a bee Tory. Looking good though nice lighting
Well today I brought a Sat Nav a Garmin Nuvi 1390T (thank you 4 days public holiday pay) I also insured it so yeah my baby got a fair bit of money sunk into it already and I'm still yet to have it ha ha
scraverX wrote:Tweaked the stereo even more after Tuesday.
Sounding real nice now but still getting used to the fact it now sounds like the subs aren't in the boot.
@troy: I didn't know the factory sub box split in half... looks kinda icky. No wonder it flexes so much.
I'd be running a bead of silicone before putting it back together, and possibly giving the inside a coat or two of FG Resin to make sure it's sealed up tight.
Rick the sub box actually has a clear o'ring around the joint to seal it.
Fitting the dynamat took me ages as I had to cut so many little pieces.
Where can I buy FG resin from and how hard is it to apply on?
Who is online
Users browsing this forum: No registered users and 110 guests