***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

What did you do on your car today?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

Post Reply
tjoz
Lancer Ralliart
Lancer Ralliart
Posts: 699
Joined: Sun Oct 04, 2009 3:51 pm
Location: Melbourne, Australia

Postby tjoz » Sat Nov 20, 2010 7:23 pm

Primed my front bar getting it ready for tomorrow and brought all new inserts for the various vent areas. Discovered collection of bugs in old grille inserts. Thought of way to stop my number plate from falling off and got gift coupons from YesAsia.com :) More excited about the coupons than the car stuff. I got till January to use them up :lol:
User avatar
extremepc
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Mon May 17, 2010 2:44 pm
Location: Sydney

Postby extremepc » Sat Nov 20, 2010 7:44 pm

Bought a dashmat, carwash goodies, door bump protectors.

Got home a bit late in the day and painted only one rotor and caliper.

trying to figure out the best way to get power for a GPS on the dash, without having a cable snaking all over the front of the dash!
User avatar
AJjnr86
Lancer Legend
Lancer Legend
Posts: 1338
Joined: Fri Jun 18, 2010 8:22 pm
Location: Maitland, NSW

Postby AJjnr86 » Sat Nov 20, 2010 9:59 pm

Washed my baby this morning, then went on a lesurely Sunday drive with my fellow CCJ members and got her dirty :( try wash it again tomorrow
Image

OHH YEA!!!!
User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sun Nov 21, 2010 12:37 pm

i washed my lancer today now it looks sparyly clean yay no more dirty car
bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Sun Nov 21, 2010 12:45 pm

Yesterday - installed my Alutec Brace, and cut up the plastic undertray to make it fit with the brace, and installed my Hella Supertones horns

didnt get pics but i will try and get some later
User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun Nov 21, 2010 12:53 pm

I detailed the car after driving it late yesterday. It has some bugs squashed on it.

Gee I love that Magiars waterless wash.
User avatar
Meaty
Lancer Evolution
Lancer Evolution
Posts: 978
Joined: Wed Nov 10, 2010 4:30 pm
Location: Melbourne Australia

Postby Meaty » Sun Nov 21, 2010 5:08 pm

well today i car my car a lot of love:

1. i gave it a high pressure rinse
2. my karcher has a foaming wash so i used it
3. microfiber applicator as a sponge
4. High pressure rinse
5. followed by a full clay bar clean
6. then a very heavy wax with Auto Glym Ultra Deep shine
7. Fw1 all interior and windows inside and out
8. Fw1 on all wheels to hinder brake dust grime
9. Wet look tyre shine

i must say even though i used Fw1 to wax the car two weeks ago it looks absolutely amazing after the clay and glym wax.
Image
User avatar
AUSSIECJ
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 414
Joined: Mon Aug 23, 2010 4:39 pm
Location: Blacktown, Australia

Postby AUSSIECJ » Sun Nov 21, 2010 8:24 pm

pic of my footwell install

Image
I LOVE HATERS ;)
Image
By aussiecj at 2010-09-20
User avatar
Kimmy
Lancer MASTER
Lancer MASTER
Posts: 2410
Joined: Sun May 16, 2010 4:21 pm
Location: Brisbane

Postby Kimmy » Sun Nov 21, 2010 8:30 pm

Finally have my pink pedals on :) ..
.. thanks to my special friend for installing them :P

Image
Last edited by Kimmy on Sun Nov 21, 2010 9:01 pm, edited 1 time in total.
User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sun Nov 21, 2010 8:45 pm

nice kimmy looking good
User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:
Contact The X

Postby The X » Mon Nov 22, 2010 7:49 am

Pumped the emergency spare tyre. Over a year of not being given an TLC the pressure had dropped down to around 47psi! The rated pressure should be 420kpa (around 61psi) - stupid electronic air pump at the servo only goes up to 414kpa! :shock: Not a big difference.
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage
User avatar
extremepc
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Mon May 17, 2010 2:44 pm
Location: Sydney

Postby extremepc » Mon Nov 22, 2010 7:36 pm

Got a catback exhaust system installed.
User avatar
Carter03
INACTIVE Member Account
Posts: 17
Joined: Sat Oct 30, 2010 2:11 pm
Location: brisbane australia

Postby Carter03 » Mon Nov 22, 2010 8:06 pm

Mitch wrote:i washed my lancer today now it looks sparyly clean yay no more dirty car


If you find a good way be sure to let me know!
User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Mon Nov 22, 2010 8:20 pm

same way others do it carter
User avatar
Rangdan
Lancer ES/EX
Lancer ES/EX
Posts: 109
Joined: Fri Sep 24, 2010 1:54 am
Location: Perth, Western Australia

Postby Rangdan » Mon Nov 22, 2010 10:07 pm

Image


NOW IM THE FIRST SO NO ONE GET ANY IDEAS RIGHT ME AND ME ONLY lol
Last edited by Rangdan on Mon Nov 22, 2010 10:10 pm, edited 1 time in total.
Post Reply

Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 107 guests