***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Radiator .VS. Condenser

Local WA State News, Meets, Cruises, Information & Talk.

Moderators: Moderators, Senior Moderators

User avatar
Rangdan
Lancer ES/EX
Lancer ES/EX
Posts: 109
Joined: Fri Sep 24, 2010 1:54 am
Location: Perth, Western Australia

Radiator .VS. Condenser

Postby Rangdan » Sun Nov 07, 2010 6:15 pm

just had a look and the radiator has been pushed in by the condenser and are leaning against each other would they have to be replaced if theyre like that?

User avatar
jolly_tas
Lancer Ralliart
Lancer Ralliart
Posts: 524
Joined: Sun May 10, 2009 2:06 pm
Location: Launceston, Tas, Australia
Contact:

Postby jolly_tas » Sun Nov 07, 2010 6:19 pm

check to see what is bent to cause them to move so much. also check the fins on the radiator... depending on the amount that are crumpled or if the actual water pipes inside the radiator have split then yes it will most likely have to be replaced or repaired. If you have any concerns then at least get the radiator pressure tested for leaks.
Image

User avatar
Rangdan
Lancer ES/EX
Lancer ES/EX
Posts: 109
Joined: Fri Sep 24, 2010 1:54 am
Location: Perth, Western Australia

Postby Rangdan » Sun Nov 07, 2010 6:39 pm

ok yer i just needed a second opinion thanks


Return to “Western Australia”

Who is online

Users browsing this forum: No registered users and 182 guests